Panasonic Toughbook CF-F8EWDZZAM Handbuch

DFQX5697ZA HS1208-0

Fingerprint Reader

Model No. CF-F8/CF-W8/CF-T8 Series

Names and Functions of Parts ................. 2

Overview ..................................................... 4

Installation .................................................. 5

More Advanced Security ........................... 8

Useful Information ..................................... 9

Troubleshooting....................................... 13

Speciﬁcations........................................... 19

SUPPLEMENTARY INSTRUCTIONS

Names and Functions of Parts

Except the following, refer to the Operating Instructions for the computer.

(Appearance may differ, depending on models.)

Fingerprint Reader

<CF-F8 Series>

<CF-W8/CF-T8 Series>

This section explains how your ﬁngerprints are enrolled and authenticated.

1Slide your ﬁnger toward yourself.

To prevent a reading error.

ASet the ﬁrst joint of your index ﬁnger on the sensor as illustrated to the

right.

BSlide your ﬁnger toward yourself while keeping it in contact with the ﬁnger-

print sensor.

CSlide your ﬁnger down until the sensor is visible.

When the ﬁngerprint sensor does not enroll or authenticate your ﬁnger-

print properly:

· You slid your ﬁnger too fast or too slow.

· Your ﬁnger was soiled or it has a scar on the surface.

· Your ﬁnger was wet or extremely dry.

· Your ﬁngerprint does not have sufﬁcient data for personal identiﬁcation.

For further information, refer to “Troubleshooting (For Devices)”.

(Îpage 13)

We shall not be liable for any loss or damage whatsoever resulting

from your Fingerprint device or neglect of Fingerprint device use, or

any data loss resulting from such developments as Fingerprint au-

thentication device malfunctioning.

CAUTION

How to Use the Fingerprint Reader

Fingerprint’s Outline

The conventional security systems use ID/passwords and token devices such as

IC cards to authenticate users. Therefore the passwords and token devices are

exposed to the risk of being lost, stolen and hacking.

The Fingerprint authentication method uses user’s ﬁngerprints instead of pass-

words for security authentication. You can use your ﬁngerprints to start up your

computer and log on Windows.

We recommend you use the Fingerprint Reader in combination with the TPM

(Trusted Platform Module) to increase the security level of your computer.

Precautions

Security Functions

Fingerprint Authentication Technology does not guarantee complete authentication and

individual identiﬁcation. Please acknowledge we shall not be liable for any loss or dam-

age whatsoever resulting from the use of, or inability to use your Fingerprint device.

The Fingerprint authentication method uses multiple fingerprints, encryption

keys, credentials data and passwords. You might not be able to use your data if

you lose ﬁngerprints, keys, credentials and passwords, so keep them in a safe

place. For further information, refer to “Backup”. (Îpage 9)

General interaction with 3rd party applications: There is no guarantee that

there will not be any negative interaction with any 3rd party software, and

will not accept any responsibility for such an interaction.

Overview

Performed by the Computer Administrator

Performed by each user

Step 4

User Fingerprint Enrollment

User’s Data

• Windows Logon Password

• Fingerprint

• Fingerprint Backup Password

• Power-on Password

Step 1

TPM Installation ( Installation Manual of

“Trusted Platform Module (TPM)”)

(If the TPM is not being used, skip this step.)

Step 2

Fingerprint Utility Installation

Step 3

TPM Fingerprint Utility Initialization

This manual describes Steps 2, 3and the initial part of Step 4.

For further steps, refer to the UPEK Protector Suite QL Help menu. (<Model with

Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [Help] / <Model with

Windows Vista>

Click (Start)

- [All Programs] - [Protector Suite QL] - [Help])

Recommended Installation Procedure

Installation

Step 1 TPM Installation

Refer to on-screen manuals Installation Manual of “Trusted Platform Mod-

ule (TPM)”. (<Model with Windows XP> Click [start] - [Run], enter “C:\util\drivers\

tpm\README.pdf”, and click [OK]. / <Model with Windows Vista> Click (Start)

and input “C:\util\drivers\tpm\README.pdf”, and press

Enter

If the TPM is not being used, skip this step.

Step 2 Fingerprint Utility Installation

Performed by the Computer Administrator.

1Log on to Windows as an Administrator.

2Close all other programs.

3<Model with Windows XP>

Click [start] - [Run], enter “C:\util\drivers\fngprint\install\

setup32.exe”, and click [OK].

Click (Start) and input “C:\util\drivers\fngprint\install\

setup32.exe”, and press

Enter

The “Protector Suite ∗.∗Setup” screen appears.

4Click [Next].

Installation starts. Follow the on-screen instructions.

5When the “Protector Suite ∗.∗has been successfully

installed.” message appears, click [Finish].

At the conﬁrmation message, click [Yes].

The computer restarts.

6Log on to Windows as an Administrator.

The “Protector Suite QL Icon” appears in the notiﬁcation area.

“Protector Suite QL Introduction” appears if you touch the sensor before en-

rolling ﬁngerprints.

NOTE

Installation

Step 4 User Fingerprint Enrollment

Performed by each user.

1<Model with Windows XP>

Click [start] - [All Programs] - [Protector Suite QL] - [User

Enrollment].

Click (Start) - [All Programs] - [Protector Suite QL] - [User

Enrollment].

Carefully read the License Agreement, select “I Accept the terms of the Li-

cense Agreement” and click [OK].

Step 3 TPM Initialization

Performed by the Computer Administrator.

The “Invalid TPM status” message is displayed by the “Protector Suite QL Icon ”

in the notiﬁcation area.

If the TPM is not being used, skip this step.

1Click on the “Invalid TPM status” message to start

“Advanced Security Initialization Wizard”.

Follow the on-screen instructions.

If the “Invalid TPM status” message is not displayed, click [start] - [All Pro-

grams] - [Protector Suite QL] - [Control Center] - [System Settings] - [TPM] -

[Initialize TPM].

If the “Invalid TPM status” message is not displayed, click (Start) - [All

Programs] - [Protector Suite QL] - [Control Center] - [System Settings] - [TPM]

- [Initialize TPM].

NOTE

2Click [Next].

3Select an enrollment mode, and click [Finish].

There is a limit to the number of ﬁngerprints for “Power-on Security”.

(Îpage 19)

We recommend you use the Power-on Security feature. This feature

prevents unauthorized access to the user’s computer at the BIOS level.

AWhen the “Power-on Security” screen appears, click [Manage Passwords...].

BSelect [Power-On] in [Password Types], and click [Set password...].

CEnter the password for “Power-on Security”, and click [OK].

DClick [Close].

EAdd a check mark for [Power-On] in [Password Types].

FEnter the password (step C), and click [OK].

GClick [Next].

· Follow the on-screen instructions.

Enroll at least two ﬁngers. Even if one of them is injured, you can use an-

other one to access your account and secret data. For further information

about the enrollment, refer to “How to Use the Fingerprint Reader” (Î

page 3) and “Fingerprint Tutorial”. (<Model with Windows XP> Click [start]

- [All Programs] - [Protector Suite QL] - [Fingerprint Tutorial] / <Model with

Windows Vista> Click (Start) - [All Programs] - [Protector Suite QL] -

[Fingerprint Tutorial].)

NOTE

· Enrollment to the biometric device

All enrolled fingerprints are stored directly in the fingerprint sensor. The

user data will be secured by the hardware protection keys obtained by the

ﬁngerprint sensor. There is a limit to the number of ﬁngerprints that can be

enrolled (Îpage 19). The number is displayed on the screen.

· Enrollment to the hard disk

All enrolled ﬁngerprints are stored on the hard disk. Hardware protection of

the user data is not possible, but multiple users can enroll their ﬁngerprints.

“User Enrollment” wizard starts. Follow the on-screen instructions.

Enrollment mode

You can make the conﬁguration for the enrollment only once during this initial-

ization phase.

1Register the Supervisor Password.

You have to register the Supervisor Password to proceed to the next step.

If you have already registered the Supervisor Password, you can move on

to step 2after performing Ato C.

If you have not done this, have enrolled your ﬁngerprint using Protector

Suite QL, and have already made Power-on Security effective, after step B,

your ﬁngerprint authentication will be necessary.

ATurn on or restart the computer.

BPress

several times while [Panasonic] boot screen is displayed soon after

the computer starts the startup procedure.

CSelect the [Security] menu.

DSelect [Set Supervisor Password], and press

Enter

EEnter your password in the [Enter New Password], and press

Enter

· The password will not be displayed on the screen.

· You can use up to 32 alphanumeric characters (including spaces).

· The case (upper/lower) is ignored.

To input numbers for the password, use the numbered keys on the keyboard.

· You cannot use

Shift

and

Ctrl

to input a password.

FEnter your password again in [Conﬁrm New Password], and press

Enter

GIn [Setup Notice], press

Enter

2Enable the Embedded Security (TPM).

ASelect [Fingerprint Security Sub-Menu], and press

Enter

BSelect [TPM State:], and press

Enter

CSelect [Enable] and press

Enter

· Default setting: Disable

DPress

F10

, select [Yes], and press

Enter

to exit the Setup Utility.

More Advanced Security

You can increase your computer’s security level by setting the BIOS level de-

scribed in this section.

Performed by the Computer Administrator.

The ﬁle described below is necessary for recovering the Fingerprint authentica-

tion data. Back up this ﬁle periodically in a safe location such as removable disk

to avoid data loss resulting from some accidents. We recommend you to store

the ﬁle in a removable disk or network drive because the beneﬁt of Fingerprint

authentication security can be reduced if you keep the ﬁle in the internal hard disk

drive.

The backup password described below is necessary for bypassing the Fingerprint

authentication. We recommend you set the backup password using the “User

Enrollment” wizard. If you do not deﬁne the backup password, you may lose your

data in case of authentication hardware failure.

File used by each user

· Backup user passport data

(Default name: <User Account>.vtp)

You need this ﬁle when you replace the embedded ﬁngerprint chip, or the hard

disk drive, or when reinstalling Windows. This ﬁle contains the ﬁngerprints,

encryption keys, and logon authentication data.

Password used by each user

· Backup Password for Enrollment

This backup password can be used in case of hardware failure to bypass the

ﬁngerprint authentication.

The passwords other than those explained above are also used for security,

so do not lose them. For further information, refer to the UPEK Protector

Suite QL Help menu (<Model with Windows XP> Click [start] - [All Pro-

grams] - [Protector Suite QL] - [Help] / <Model with Windows Vista>

Click

(Start)

- [All Programs] - [Protector Suite QL] - [Help]).

How to Backup:

Select “Export” in “Import or Export User Data” to save the user data. (<Model with

Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [Control Center] -

[Import or Export User Data] / <Model with Windows Vista> Click (Start) - [All Pro-

grams] - [Protector Suite QL] - [Control Center] - [Import or Export User Data])

For further information, refer to the UPEK Protector Suite QL Help menu. (<Model

with Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [Help] / <Mod-

el with Windows Vista>

Click (Start)

- [All Programs] - [Protector Suite QL] - [Help])

Backup

NOTE

CAUTION

Useful Information

Password Bank*1limitations: The following web pages and Windows ap-

plications cannot be supported.

· Web pages which are created by the following technologies:

- Web forms created on the ﬂy using JavaScript.

- Web forms which looks as one form (ie logon ﬁeld, password ﬁeld), but in-

ternally created with two independent forms.

- There can be auto submit problems with web forms which do not have Sub-

mit button. All forms that you cannot submit with

Enter

will be entered by

Password Bank, but not submitted.

· Applications which do not use standard Windows controls and draw controls

by their own.

· This includes any Java based application.

*1 For information of these functions, refer to the UPEK Protector Suite QL

Help menu (<Model with Windows XP> Click [start] - [All Programs] -

[Protector Suite QL] - [Help] / <Model with Windows Vista>

Click (Start)

- [All Programs] - [Protector Suite QL] - [Help]).

“Sensor Scrolling Feature” is not supported.

Handling & Maintenance

The enrolling and authentication sensitivity may decline under the condi-

tions below. Wipe off stains or moisture on the sensor surface with a soft

cloth.

· The surface of the ﬁngerprint sensor is soiled with dust, skin oil, or sweat.

· The surface of the ﬁngerprint sensor is wet as a result of moisture or conden-

sation.

Static electricity may also cause the sensor to malfunction. To make your

ﬁnger static-free, touch a metal surface before placing it on the ﬁngerprint

sensor. Exercise caution against static electricity in winter and other dry

conditions.

Malfunction or damage may occur when:

· The ﬁngerprint sensor surface was damaged by the strong rubbing of a solid

material, scratches, or being pecked with a pointed item.

· The sensor was touched with a ﬁnger soiled with mud, damaging the sensor

surface with a tiny substance, and staining the surface.

· The sensor surface was covered with a seal, or soiled with ink.

Limitations in Use

Useful Information

Andere Handbücher für Toughbook CF-F8EWDZZAM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Laptop-Zubehör Handbücher

Panasonic

Panasonic CF-VEB272AW Bedienungsanleitung

Panasonic

Panasonic CF-VEBU05U Bedienungsanleitung

Panasonic

Panasonic CF-VEB272 - Port Replicator Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-T7BWATZJM Handbuch

Panasonic

Panasonic Toughbook CF-19KHRAG2M Verdrahtungsschema

Panasonic

Panasonic Toughbook CF-U1AQB1G2M Verdrahtungsschema

Panasonic

Panasonic CF-VEB511 Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-18BCAGCMM Handbuch

Panasonic

Panasonic Toughbook CF-18BCAGCMM Handbuch

Panasonic

Panasonic CF-VEB341W Bedienungsanleitung

Panasonic

Panasonic CF-VEBU06W - Mini-dock - PC Bedienungsanleitung

Panasonic

Panasonic CF-VEB274W Bedienungsanleitung

Panasonic

Panasonic CF-VEB272A2W - Port Replicator - PC Bedienungsanleitung

Panasonic

Panasonic CF-VEB342W Bedienungsanleitung

Panasonic

Panasonic CF-VEBU05BU Bedienungsanleitung

Panasonic

Panasonic CF-VEB343 Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-74JDMBD2M Handbuch

Panasonic

Panasonic CF-VEB343 Bedienungsanleitung

Panasonic

Panasonic CF-VEB471W Bedienungsanleitung

Panasonic

Panasonic CF-WEB184 Series Bedienungsanleitung

Panasonic

Panasonic CF-VEB512W Montage- und Bedienungsanleitung

Panasonic

Panasonic CF-VEB331 Series Bedienungsanleitung

Panasonic

Panasonic CF-VEB612A Bedienungsanleitung

Panasonic

Panasonic CF-VEB351 Bedienungsanleitung

Beliebte Laptop-Zubehör Handbücher anderer Marken

BenQ

BenQ LaptopBar NB21 Bedienungsanleitung

Rocstor

Rocstor Y1RB022-B1 Handbuch

KLIM

KLIM Mistral Bedienungsanleitung

Xbrand

Xbrand Lap Lounge XB-1010-XX Bedienungsanleitung

StarTech.com

StarTech.com LTRISERP Bedienungsanleitung

Surefire

Surefire PORTUS X2 Bedienungsanleitung

Humanscale

Humanscale L6 Bedienungsanleitung

HP OmniBook 2100 Bedienungsanleitung

Gamber Johnson

Gamber Johnson 7160-0250 Bedienungsanleitung

Manhattan

Manhattan 303088 Bedienungsanleitung

Rocstor

Rocstor PrivacyView Handbuch

Twelve South

Twelve South BookArc Bedienungsanleitung

Dicota

Dicota Secret Bedienungsanleitung

Tecknet

Tecknet N9 Bedienungsanleitung

Fujitsu

Fujitsu Stylistic CE CT2000 Series Bedienungsanleitung

XMG

XMG OASIS Bedienungsanleitung

Thanko

Thanko SUPER GORONE Bedienungsanleitung

Kensington

Kensington 33194 Bedienungsanleitung