Panasonic CF-17 Bedienungsanleitung

CF-M34/CF-17 Series

Reference Manual

Personal Computer

Contents

We recommend that this Reference Manual be printed.

NOTE:NOTE provides a useful fact or helpful information.

CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.

WARNING:WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Shut Down]: This illustration means to click [Start], then to click [Shut Down].

(For some applications, you may need to double-click.)

Enter : This illustration means to press the [Enter] key.

Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

page: When the cursor is moved to an item under [Contents] or to page (green display), the

shape of the cursor will change to . Under this condition, if characters are tapped (or a

click is made), the corresponding page in the Reference Manual will be displayed.

: This illustration means to refer to the Operating Instructions.

Illustrations in this Reference Manual

Read Me First.............................................................. 2

Key Combinations..................................................... 4

LED Indicators............................................................ 5

Touch Pad (Advanced)............................................. 6

Touchscreen.............................................................. 10

Panasonic Hand Writing (Touchscreen)........... 12

Suspend/Hibernation Functions ........................ 13

Security Measures .................................................. 16

Computing On The Road....................................... 19

Battery Power ........................................................... 21

PC Cards..................................................................... 27

RAM Module.............................................................. 28

External Display....................................................... 29

USB Devices.............................................................. 30

Modem......................................................................... 32

Port Replicator ......................................................... 33

Accessories............................................................... 34

Hard Disk Drive ........................................................ 35

Setup Utility............................................................... 37

Smart Boot................................................................. 43

Technical Information ............................................ 44

DMI Viewer ................................................................. 45

Creating BACKUP DISKS...................................... 46

List of Error Codes.................................................. 48

Dealing With Problems (Advanced)................... 50

In this manual, descriptions are given us-

ing illustrations not featuring the hand-

grip belt or handle for convenience of ex-

planation.

CF-M34 Series CF-17 Series

Do not power off your computer or press the floppy disk drive eject button

while the floppy disk drive being accessed.

Doing so may damage the data on the disk and render the disk useless.

Use care when handling disks.

To protect the data on your disks or to prevent a disk from becoming stuck in your

computer, avoid the following:

• Sliding the shutter on the disk manually.

• Exposing the disk to a magnetic field.

• Storing the disk in locations prone to high temperatures, low pitched noise, dampness,

or dust.

• Applying more than one label on the disk.

Confirm the contents of a disk before formatting it.

Confirm that no important data is on the disk, because all data on the disk will be

erased.

Use the write-protect tab.

This is a must for preserving important data.

This prevents your data from being erased

or overwritten.

Do not expose your computer to shock.

Please use care when handling your computer, shock may damage your hard disk

or make your software applications and data unusable.

Do not power off your computer while software applications are running or

HDD indicator () is on.

Properly shut Windows* down to avoid problems ([Start] - [Shut Down] ).

Save all valuable data to disks.

Backing up data to disks will limit damage should trouble occur to your computer or

should you inadvertently change or erase data.

Use the security function for all important data. ( page 16)

Saving Data on the Hard Disk

*This computer uses Microsoft®Windows®95 Operating System.

Write Enable Write Disable

Write-protect Tab

Saving Data on Disks

Users are advised to purchase the latest versions of virus protection software

and use them regularly.

Computer Viruses

We recommend you run the software:

• When booting your computer.

• After receiving data.

We recommend that you check data received on disks or from external sources,

such as data downloaded from the Internet, e-mail, etc. (For compressed files,

please uncompress them before running a check).

LCD Panel

High-precision and advanced technologies are necessary in the production of color

liquid crystal displays (color LCDs). Therefore, if 99.998% or more of the picture

elements are functioning properly, no defect is considered to exist.

Read Me First

Environment

Place the computer on a flat stable surface.

In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}

Humidity: 30% to 80% RH (No condensation)

Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

Humidity: 30% to 90% RH (No condensation)

Usage Environment

Such areas may result in damage to the computer.

Areas with electronic equipment

These areas may interfere with your display or

cause your computer to produce strange sounds.

Areas with extremely high/low temperatures

Places not to use your computer

Do not leave things near the computer that are sensitive to heat. During opera-

tion, the computer may become warm.

Handling

This computer has been designed so as to minimize shock to the LCD and hard disk

drive, the leakage of liquid (e.g., water) from the keyboard, etc., but no warranty is

provided against such trouble. Therefore, as a precision instrument, please be ex-

tremely careful in the handling.

Do not drop or hit your computer against solid objects.

Do not stand the computer on its side or allow it to tip over. When the computer

receives extremely strong shock after falling, the hard disk or floppy disk drive, etc.,

may become inoperable.

Do not carry your computer when it is ON.

Remove all cables before transporting your computer.

We recommend preparing a fully charged battery (and optional charger, if possible).

When transporting spare batteries inside a package, briefcase, etc., it is recommended

that the batteries be stored in a plastic bag.

Do not place the computer upright. When the computer receives extremely strong

shock after falling, the hard disk or floppy disk drive, etc., may become inoperable.

Do not carry the computer while the display is open, or carry it by gripping the display.

Do not put anything (e.g., a piece of paper) between the display and keyboard.

Always carry your computer with you. Never check it in with luggage. For use of the

computer inside an aircraft, we recommend asking the airlines regarding their policy

on this issue.

Read Me First

Maintenance

Areas excluding the display

Wipe these areas with a soft cloth, after apply-

ing water or detergent diluted with water to the

soft cloth and firmly wringing out excess water.

Display

Use a soft dry cloth like gauze to lightly wipe

the display.

Touch Pad

page 9

CAUTION

Do not use benzene or thinner, or disinfectant-type alcohol.

Do not directly use water, liquid detergents or spray-type cleaners. If liquid enters

the computer, this may cause the computer to malfunction or become defective.

CAUTION

Pressing this key combination adjusts the brightness

of LCD.

By pressing this key combination, you can select ei-

ther an external display, LCD or simultaneous, even

if an external display is not connected. Rebooting

the computer, or powering off then on, restores the

display setting of the Setup Utility.

Pressing this key combination turns off audio from

the internal speakers and headphone jack. Pressing

it again, or rebooting the computer restores the

speaker setting of the Setup Utility.

Pressing this key combination adjusts the volume of

the internal speakers and headphone jack.

Pressing this key combination causes the current

screen on the display to be saved to memory, and

powers off the computer. When the computer is pow-

ered on, by sliding the power switch, the saved screen

will be displayed. (The computer must be plugged

into the AC adapter or have a battery pack with suf-

ficient remaining power installed.)

Pressing this key combination temporarily disables

the power management (timeout feature) of the Setup

Utility. Pressing it again, or rebooting the computer

restores the power management setting of the Setup

Utility. page 20,41

Pressing this key combination displays the remain-

ing battery capacity on the screen. page 21

Pressing this key combination turns off the LCD, ex-

ternal display and hard disk drive until operation is

resumed by pressing any key or mouse*4 (except the

keyboard and mouse connected to the USB port).

Key Combinations

Do not press the following key combinations repeatedly in (quick) succession.

Do not press the following key combinations while using the touch pad (mouse) or other keys.

When a MIDI file is playing, do not use the following key combinations. The tempo of the MIDI file may temporarily slow.

LCD brightness con-

trol (down)

LCD brightness con-

trol (up)

Display change

Speakers on/off switch

Volume control

(down)

Volume control (up)

Holding down on the keys

changes the sound level.

Power off using the

suspend function

Power management

enable/disable switch

Remaining capacity of

the battery pack

ECO mode for con-

serving power

Fn + F1

Fn + F3

Fn + F4

Fn + F5

Fn + F7

Fn + F8

Fn + F9

Fn + F

Fn + F6

Is displayed when

the brightness is at

its maximum value.

Key Functions Popup Window

OFF

Enable

Disable

Down

Disabling the speakers will also disable the warn-

ing beep.

NOTE

Fn + F2

This key combination cannot be used to adjust the vol-

ume of the warning beep and the touchscreen sound.

*1Under the condition the sound function of Windows is not working, or is displayed, but the volume does not change.

*2 When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.

*3Depending on the state of the system, settings may be unable to be changed. In such cases, try performing the settings again.

This "mouse" indicates the touch pad, the touchscreen and an external mouse.

Is displayed when

the brightness is at

its minimum value.

Remaining

capacity (%)

display

Battery pack is

not installed.

This indicator lights green when Caps Lock is pressed. Subsequent

non-shifted input is capitalized.

These indicators light green when NumLk is pressed. This causes a

portion of the keyboard to function as a numeric keypad. The [Enter] key

functions differently depending on the application.

This indicator lights green when ScrLk is pressed. Scroll lock functions

differently depending on the application.

This indicator lights when the hard disk drive is accessed.

Not lit : AC adapter not connected or charging not being per-

formed.

Orange :Charging in progress.

Green :Charging finished.

Red :Battery is low

(remaining battery capacity is approx. 9% or less).

Blinking red :Battery pack or charging malfunction.

Blinking orange :Battery capacity being refreshed.

Blinking orange five times after the AC adapter is connected :

Charging on standby. (The ambient temperature is out-

side the allowable range. Once the allowable range

requirement is satisfied, charging begins automatically.)

Not lit : Power off

Green :Power on

Blinking green :Suspend mode

Caps Lock

NumLk (Numeric key)

ScrLk (Scroll lock)

Hard disk status

Battery pack

status

Power status

LED Indicators

Touch Pad (Advaced)

Wheel mode operations (almost identical

to the case of using the Microsoft®

IntelliMouseTM for scroll, zoom, etc., op-

erations) are possible for Microsoft®wheel

function-compatible applications.

Microsoft®IntelliMouseTM is a mouse-type

device that, in addition to the two conven-

tional buttons, incorporates a wheel able

to rotate forwards/backwards.

Use the touch pad to move the cursor on the display and perform normal computer

operations.

For instructions on how to handle the touch pad, refer to page 9.

The touch pad has the following two modes of operation.

Scrolling Area

Microsoft®IntelliMouseTM Wheel Mode

(Setting at the time of purchase)

Only scroll operation is possible for ap-

plications not compatible with the Mi-

crosoft®wheel function.

Even for applications compatible with the

Microsoft®wheel function, there are

cases where only vertical scrolling or

only horizontal scrolling is possible in this

mode.

Scrolling side-to-side

Possible when a check mark

is added for [Horizontal].

Scrolling up/down

:Typical mouse operations use this area.

When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and

[Vertical] of [Scroll Configuration], the entire surface can be used for typical mouse

operations.

Scrolling Area

Scrolling up/down

Possible when a check

mark is added for

[Vertical].

For the Pan and Auto Scroll functions, the en-

tire work surface of the touch pad can be used

for scrolling.

Changing the mode of the touch pad

1Select from the taskbar and then select [Motion] or select [Motion] in [Start] -

[Settings] - [Control Panel] - [Mouse].

2To set the Microsoft®IntelliMouseTM Wheel mode

Add the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].

To set the original mode

Delete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration]

and add the check mark for [Horizontal] and/or [Vertical] .

3Press [OK].

Original Mode

Left Button

Right Button

Work Surface

Using the Touch Pad

When you are not sure whether an application is compatible with the Microsoft®

wheel function or not, try using both modes. Furthermore, depending on the appli-

cation, there are cases where scrolling may not be possible with either mode.

NOTE

The touch pad has been designed to work only when a finger is used. Therefore, do

not use any implement on the touch pad.

NOTE

Touch Pad (Advanced)

Left Button

Right Button

Work Surface

(To next page)

Operate after pressing the two buttons simul-

taneously.

Two quick taps, but on the

second tap leaving your

finger down (applying

pressure) and moving it

on the work surface.

While holding down the

button, moving your fin-

ger on the work surface.

Basic Operation

Function Touch Pad Operation

Moving the Cursor

Tapping/Clicking

Double-Tapping/

Double-Clicking

Dragging

Scroll*

Scroll a document

(rotate the wheel)

Auto Scroll*

Automatically scroll a document

(move the mouse after clicking

the wheel)

Move the tip of your finger

lightly over the surface.

When a check mark is added for [Drag

Lock] *

After the drag operation (above : left side), it

is necessary to determine the destination (i.e.,

location of drop) by one tap. Under the con-

dition no destination is selected, do not use

the suspend or hibernation function. Nothing

is shown on the display, even after resuming

from the suspend or hibernation mode.

In this case, the display will return after a tap

or click is made.

tapping

double-clicking

When releasing the auto scroll function:

One tap on the work surface.

Wheel

Indicates an operation applicable to the Microsoft®IntelliMouseTM Wheel mode.

Indicates an operation applicable to the original mode.

Original

Wheel

Original

Wheel

Original

Wheel

Original

Wheel

Original

Wheel

Original

Wheel

Wheel Original

double-tapping

clicking

In [Start] - [Settings] - [Control Panel] - [Mouse] - [Tap and Buttons]

Operate while holding down the two buttons.

Ctrl + Magnify

Reduce

Pan*

Scroll in various directions of a

document

(move the mouse slightly while

holding down the wheel)

Zoom*

Magnify/reduce the display of

a document.

(rotate the wheel while holding

down Ctrl )

Data Zoom*

Display or hide a document, or

perform operations to return to or

proceed with Internet Explorer.

(rotate the wheel while holding

down Shift )

Function Touch Pad Operation

Shift +

(To next page)

Touch Pad (Advanced)

CAUTION

Within the parentheses () are operations to follow when using an external Microsoft®

IntelliMouseTM.

*Indicates that the movements will differ depending on the application.

When an external mouse or trackball with additional functions (e.g., wheel func-

tion) is connected, a part or all of the additional functions may foil to operate. To

use these additional functions, install the driver or application software of the

external device by following the procedure below. However, once the driver or

application software is installed, touch pad functions (e.g., auto scroll) may not

operate even if the touch pad is enabled (see the procedure for “When you want

to re-enable the touch pad.”).

1In [Control Panel] - [System] - [Device Manager], select [touch pad] in [Mouse],

press [Remove] to delete it, then press [OK] to confirm the deletion.

2Power off your computer and connect the external mouse or trackball device to

the computer.

3Turn the power on and run the Setup Utility ( page 37). In [Main] menu, set

[Touch Pad] to [Disable] and close the Setup Utility.

4Following the operating instructions for the connected external mouse, install

the necessary driver.

After the installation, set [Touch Pad] to [Disable] in the Setup Utility.

Do not enter the suspend or hibernation mode when an external mouse is con-

nected to the serial port.

When you want to re-enable the touch pad;

1In [Control Panel] - [System] - [Device Manager], when an external mouse or

trackball device is displayed in [Mouse], press [Remove] to delete it, and then

press [OK] to confirm the deletion.

2Power off your computer and remove the external mouse or trackball device.

3Turn the power on and run the Setup Utility ( page 37). In [Main] menu, set

[Touch Pad] to [Enable] and close the Setup Utility.

4Confirm whether [touch pad] exists in [Mouse] (in [Control Panel] - [System] -

[Device Manager]).

Wheel

Touch Pad (Advanced)

CAUTION

When [PS/2 Compatible Mouse Port] is displayed in [Mouse]:

1Select [PS/2 Compatible Mouse Port] and then press [Properties].

2Select [Driver] - [Update Driver] and then press [Next].

3Select [Display a list of all the drivers....] and then press [Next].

4Press [Next].

5At the [Update Driver Warning], press [Yes] and then press [Next].

6At the [Insert Disk], press [OK].

7Input [c:\util\drivers\mouse] and then press [OK].

8Press [Finish].

9The display will ask you to restart Windows, press [Yes].

The double-tapping speed of the touch pad cannot be changed.

NOTE

Handling the Touch Pad

When using a key combination such as Fn + F5 , do not touch the touch pad.

If a key combination is used while the pad is being touched, the function of the

key combination will not work. In addition, it is possible that control of the cursor

will be lost and the cursor will not show proper movements. In such cases, the

computer has to be restarted by using the keyboard (e.g., ).

Do not place any object on the work surface or press down forcefully with sharp-

pointed objects (i.e. nails), hard objects that can leave marks (i.e. pencils and

ball point pen).

Do not allow things that could dirty the touch pad, such as oil. The cursor may

not work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Your computer is equipped with a touchscreen display allowing you to perform the

same operations as the touch pad or mouse by touching the surface of the display with

your finger. (The following explanation gives one example (for the default settings).

The operation settings can be changed in [Start] - [Programs] - [Updd] - [Settings].)

Handling the Touchscreen

Do not place any object on the surface or press down forcefully with sharp-pointed

objects (i.e. nails), hard objects that can leave marks (i.e. pencils and ball point

pen).

Do not apply pressure within 5 mm of the perimeter of the display panel. The

cursor may move to the edge of the display.

Do not operate the computer when such things as dust are on the screen. Do not

allow contact with substances that could dirty the touchscreen, such as oil. The

cursor may not work properly in such cases.

When the touchscreen becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as a gauze or soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Moving the cursor Clicking

Double-clicking Dragging

Cursor

Touchscreen

CAUTION

The touchscreen function can not be used in the MS-DOS mode and when

using the full screen in [MS-DOS prompt].

When the operation of panning (only LCD) is performed while the screen reso-

lution is set to [1024 x 768 dots], the touchscreen function will not work properly.

If a change is made to the screen resolution, or the cursor can not be pointed

correctly with your finger, be sure to perform [Calibrate]. page 111

(To next page)

Tap and hold the object (i. e. file

or icon), move your finger on the

surface (dragging the object to

the desired location), then re-

lease your finger.

Two quick

taps

One tap

Andere Handbücher für CF-17

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Laptop Handbücher

Panasonic

Panasonic CF-S10CDPZDM Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-W2FWCZZBM Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-74JDMBD2M Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-27FCCKFAM Bedienungsanleitung

Panasonic

Panasonic CF-V21P Series Bedienungsanleitung

Panasonic

Panasonic CF-19K4RAX2M Bedienungsanleitung

Panasonic

Panasonic CF-74CCBEBBM - Toughbook 74 - Core Duo 1.83... Bedienungsanleitung

Panasonic

Panasonic CF-W5LWEZZ Bedienungsanleitung

Panasonic

Panasonic CF-31 Series Bedienungsanleitung

Panasonic

Panasonic CF-51JFDECBM - Toughbook 51 - Pentium M 2... Bedienungsanleitung

Panasonic

Panasonic Toughbook 53 Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-R1N62ZVKM Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-U1A1E1Z2M Bedienungsanleitung

Panasonic

Panasonic CF-19 series Verdrahtungsschema

Panasonic

Panasonic Toughbook CF-C1ADAAZ6M Bedienungsanleitung

Panasonic

Panasonic CF-Y7 series Bedienungsanleitung

Panasonic

Panasonic CF-52 Mk2 Bedienungsanleitung

Panasonic

Panasonic CF-25 Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-29CTKGZKM Bedienungsanleitung

Panasonic

Panasonic CF-71 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-74JDMDD2M Bedienungsanleitung

Panasonic

Panasonic CF-Y4 - Batt For Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-S9KWAZG1M Bedienungsanleitung

Panasonic

Panasonic CF-WGP Series Montage- und Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

Toshiba

Toshiba A105-S2236 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Sony

Sony VAIO PCG-FX270 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Toshiba

Toshiba mini NB300 Bedienungsanleitung

Lenovo

Lenovo ThinkPad X201 Tablet Handbuch