Panasonic Toughbook CF-31ATA112M Bedienungsanleitung

Reference Manual

Personal Computer

Model No. CF-31 Series

We recommend that this Reference Manual be printed.

Descriptions

• For common procedures and screens for Windows 7 and

Windows XP, this Reference Manual uses the procedures

and screens of Windows 7.

• Some menus may differ for Windows XP.

• Windows XP does not require clicking operation to of

the notification area.

Introduction

This manual explains using the Windows 7 or Windows XP default setting.

In these instructions, the names are referred as follows.

“Genuine Windows®7 Professional” as “Windows” or “Windows 7”

“Genuine Microsoft®Windows®XP Professional” as “Windows” or “Windows XP”

For the users of the model with Discrete Video Controller

Your computer is equipped with two graphics processing units (GPUs).

The Intel®GPU consumes less power, but reduces the graphics display performance.

The discrete GPU consumes more power, but maintains a higher graphics display performance.

In this manual, refer to the sections preceded by the following descriptions, whenever they appear.

For the users of the model without Discrete Video Controller

Your computer is equipped with the Intel®graphics processing unit (GPU), which is designed to save power effectively.

In this manual, refer to the sections preceded by the following description, whenever it appears.

You can update to the latest patches and service packs for Windows with the following menus.

Click (Start)*1 - [All Programs] - [Windows Update].

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required, contact your tech-

nical support office.

*1 Windows XP: [start]

Sound and video

Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in PC Cards and SD Memory Cards may be interrupted

during playback. If this happens, copy them to the hard disk drive and play back.

Windows Update

Regarding Windows 7

Introduction



Depending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the sound at startup.

ARight-click the desktop and click [Personalize] - [Sounds].

BRemove the check mark from [Play Windows Startup sound], and click [OK].

When high-frequency sound occurs

If high-frequency sound occurs around keyboard while using the computer, check the settings for the USB power saving function.

A standard user needs to enter an administrator password and click [OK].

Set [USB selective suspend setting] to [Enabled].

AClick (Start) - [Control Panel] - [System and Security] - [Power Options].

BClick [Change plan settings] of the current power plan.

CIn [Change settings for the plan], click [Change advanced power settings].

DIn [Advanced settings], double-click [USB settings].

EDouble-click the displayed [USB selective suspend setting].

FChange settings of [On battery] and [Plugged in] to [Enabled].

GClick [OK] and exit the [Advanced settings] screen.

Switching the GPU that is used

When you start up the computer for the first time after purchase, the Intel®GPU is activated to save power.

You can manually change the GPU that is used.

1Set [Switchable Graphics] to [Switchable].

ATurn on or restart the computer.

BPress

Del

while [Panasonic] boot screen is displayed soon after the computer starts the startup

procedure.

CSelect the [Main] menu and set [Switchable Graphics] to [Switchable].

DPress

F10

, select [Yes], and press

Enter

to exit the Setup Utility.

Computer will start.

2Log on to Windows.

3Click on the notification area, and click .

4Select [Switchable Graphics].

5To switch to the Intel®GPU, select [Power Saving Video] in [Switchable Graphics].

To switch to the discrete GPU, select [Performance Video] in [Switchable Graphics].

Introduction

6Click [OK].

Wait until the next [OK] screen appears.

7Click [OK].

NOTE

You cannot change the GPU that is used while operating graphics-related application programs.

Once the GPU is switched, switching to the other GPU is not possible for a certain period of time.

When a digital display (such as an HDMI display) is connected and the computer’s display is closed, you cannot

switch the GPU that is used.

When an external display is connected and the GPU is switched, the video output destination may unexpectedly be

changed.

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on or off.

This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

If the message “Your computer might be at risk” is displayed

Select (red icon) on the notification area and make the appropriate settings. The Windows Security Center regularly gives

you notice so that you can make the optimum settings. This is not an error message and you can use the computer.

However, making appropriate measures is recommended to reduce the risk of virus and other attacks.

Regarding Windows XP

Key Combinations

NOTE

Do not repeatedly press the keys in quick succession.

Do not use the key combinations together with touch pad (external mouse), touchscreen (only for model with touch-

screen) or other key operations.

Do not use the key combinations before you log on to Windows. Wait until the hard disk drive indicator turns off.

On the Setup Utility screen, you can use the key combinations of

and

The key combinations may not work with some applications.

The pop-up icon appears after logging on to Windows. It may not appear in some application conditions.

Key Function Pop-up icon

LCD brightness

(

= down /

= up)

Key Combinations

Display mode switching (page 48)

When an external display (a projector etc.) is connected, you can change the dis-

play mode.

APress

BClick the display mode. (Computer only/Duplicate/Extend/Projector only)

The change you made may not be effective until

Enter

is pressed.

You can also change the operating mode by pressing +

Computer only Duplicate Extend Projector only

CAUTION

Do not press any keys until the display has finished switching.

Do not use this function:

• When playing motion video such as DVD or MPEG.

• When an extended monitor is not connected.

• When showing a game screen such as pinball.

• When using the extended desktop.

*1 Speaker on/off

NOTE

Beeps do not sound if you turn off the speaker sound.*3

OFF

(MUTE)

Key Function Pop-up icon

LCD LCD + HDMI display (port replicator side)*2 HDMI display (port

replicator side)*2 LCD + HDMI display (computer side) HDMI display

(computer side) LCD + analog display analog display HDMI dis-

play (computer side) + analog display

Key Combinations

*1 These key combinations are disabled when [Concealed Mode] is enabled.

*2 Only when a port replicator having an HDMI port is connected.

*3 Even if [Sound] is set to [OFF] on the [Concealed Mode Configuration] menu, icon on the notification area and [Volume] in [Sound-

MAX] display do not show mute state.

However, audio from the speaker is not heard.

*4 Windows XP: standby

Volume

(

= down /

= up)

NOTE

When fine-tuning the sound volume, press and hold

, and press

intermittently.

This does not work on beeps or speakers connected to the USB port.

Activate sleep*4 (page 16)

Concealed Mode on/off

You can select on/off of LCD Backlight, LED, Sound*3, Wireless Radio, Backlit

Keyboard and Fan.

NOTE

You have to set [Concealed Mode] to [Enabled] in Setup Utility.

(page 90)

You can set the devices turned off in [Concealed Mode] with Setup Utility

(page 90).

If you press

in succession, the Concealed Mode may not be

switched. More than 4 minutes interval is necessary to switch on/off.

Remaining battery charge (page 26)

F10

Activate hibernation (page 16)

Key Function Pop-up icon

Key Combinations

You can make 2 settings:

•Fn key lock

When you press

, the key is locked (pressed-down) until you press another key. Use this when pressing difficult key

combinations.

• Pop-up icon on/off

1Start up the Hotkey Settings.

Click (Start)*5 - [All Programs] - [Panasonic] - [Hotkey Settings].

2Make the settings.

[Use Fn key lock]

When using an

key combination

APress

once. (Locked)

BPress another key. (Lock released)

When using successive

key combinations

APress

twice. (Locked)

BPress another key.

Fn key remains locked until you press

again.

[Notification]

[Make sounds when Fn key is pressed]*6

[Show status on screen]: Displays the Fn key status when on the notification area is clicked.

•:

is locked.

•:

is not locked.

[Disable popup]

The pop-up icon will not be displayed.

3Click [OK].

NOTE

You can have different settings for each user.

*5 Windows XP: [start]

*6 If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not sound.

Hotkey Settings

Touchscreen

You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface

with the stylus (included).

For further information, click (Start) - [Control Panel] - [Hardware and Sound] - [Pen and Touch] - [Flicks] - [Practice using

flicks].

To right-click

ATouch and hold with the stylus, or touch and select the right button of “touch pointer”.

AClick on the notification area.

changes to .

BClick the object you want to right-click.

returns to .

NOTE

The touchscreen function does not work in the Setup Utility.

You need to make the following setting for each user.

AClick [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Panel Configuration].

BSelect the settings, and then click [OK].

• Do not add a check mark to [Delete Cursor] since the display may be distorted.

If you add a check mark for [Use] in [Hold [Ctrl] key down + Touch the screen] of [Touch Panel Configuration], touching

the screen may always be recognized as a right-click. To return to the normal operation, press

Ctrl

on the keyboard.

The touchscreen function does not work in the Setup Utility, in the full screen of [Command Prompt].

Operate the touchscreen with your finger or with an approved stylus

When using the touchscreen function, use only your finger or an approved stylus on the surface.

Operating the touchscreen with an object other than your fingertip or the stylus (a fingernail or metal object, or other hard

or sharp objects that may leave a mark) may scar or stain the surface, causing the touchscreen to malfunction.

Do not apply too much pressure when operating the touchscreen

Only a light touch is required to operate the touchscreen. Applying too much pressure may damage the surface.

Operation of the touchscreen

Touchscreen

When the touchscreen becomes dirty, wipe it with an approved soft cloth

The touchscreen is specially treated to prevent dirt from adhering to the surface, so dirt can be removed easily using a dry

cloth (use only the approved soft cloth). If the dirt does not come off easily, breathe on the surface and try again.

Do not apply water or solvents to the soft cloth.

Clean the touchscreen while the computer is powered off

Cleaning the screen while the power is on may cause the computer to malfunction. Also, dirt on the touchscreen is easier

to see when the computer is powered off, and so is easier to clean.

Wash the soft cloth when it becomes dirty

When the soft cloth becomes dirty, wash it with mild detergent. Do not use bleach or fabric conditioner (softener), or try to

sterilize the cloth by boiling.

If the soft cloth is dirty, it may be ineffective in cleaning the touchscreen, and in fact may cause dirt to adhere to the touch-

screen.

Check the following to prevent the surface of the touchscreen from being scratched

Are you using your finger or a stylus to operate the touchscreen?

Is the surface clean?

Is the soft cloth clean?

Are you using the stylus with the tip extended?

Is the tip of the stylus clean?

Is your finger clean?

Do not touch the screen outside of the LCD display area

The touchscreen input area is defined by the LCD display screen. Touching the screen outside of the display area may

result malfunctions or damage to the touchscreen.

Maintaining the performance of the touchscreen

Things to keep in mind when using the touchscreen

Dieses Handbuch passt für folgende Modelle

117

Inhaltsverzeichnis

Andere Panasonic Laptop Handbücher

Panasonic

Panasonic Toughbook CF-28PRJGZKM Bedienungsanleitung

Panasonic

Panasonic CF-71 Series Bedienungsanleitung

Panasonic

Panasonic CF-25 Bedienungsanleitung

Panasonic

Panasonic CF-27 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-29F3K15KK Bedienungsanleitung

Panasonic

Panasonic ToughBook CF-72 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-M32W5M Bedienungsanleitung

Panasonic

Panasonic CF-18KHH6512 Bedienungsanleitung

Panasonic

Panasonic The Toughbook 52 Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-52EKMBGAM Bedienungsanleitung

Panasonic

Panasonic CF-53AUGZK1M Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-18BCAGCMM Bedienungsanleitung

Panasonic

Panasonic CF-R1 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-73 Series Bedienungsanleitung

Panasonic

Panasonic CF-20 series Bedienungsanleitung

Panasonic

Panasonic CF-72X3UUBDM - Toughbook 72 - Pentium 4-M 1.8... Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-74JDMDD2M Bedienungsanleitung

Panasonic

Panasonic CF-19 series Verdrahtungsschema

Panasonic

Panasonic CF-53AUGZK1M Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-19AHJAX1M Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-41MKIII Bedienungsanleitung

Panasonic

Panasonic CF-29 Series Bedienungsanleitung

Panasonic

Panasonic TOUGHBOOK CF-19KHRJXQV Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-T7BWATZJM Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

Toshiba

Toshiba A105-S2236 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Toshiba

Toshiba mini NB300 Bedienungsanleitung

Sony

Sony VGN-T240P VAIO Bedienungsanleitung

Compaq

Compaq Armada E700 Series Bedienungsanleitung