Panasonic CFVDL02 - LCD MONITOR/ LPTP Bedienungsanleitung

Introduction ................................................................... 4

Names and Functions of Parts .................................... 5

Mounting the LCD Monitor........................................... 6

Starting Up/Shutting Down .......................................... 8

Touchscreen ................................................................. 9

Adjusting the LCD Monitor ........................................ 11

Troubleshooting ......................................................... 14

Specifications ............................................................. 15

OPERATING INSTRUCTIONS

ENGLISH

LCD Monitor

CF-VDL02

Introduction ................................................................. 18

Noms et fonctions des pièces ................................... 19

Montage du Moniteur LCD ......................................... 20

Mise en marche/Arrêt ................................................. 22

Ecran tactile ................................................................ 23

Réglage du Moniteur LCD .......................................... 25

Dépannage .................................................................. 28

Spécifications ............................................................. 29

MODE D’EMPLOI

FRANÇAIS

ENGLISH

WARNING

A LCD monitor may be installed in a motor vehicle and visible to the driver if the LCD monitor is used for vehicle information,

system control, rear or side observation or navigation. If the LCD monitor is used for television reception or video or DVD play,

the LCD monitor should be installed so that these features will only function when the parking brake is applied. A LCD monitor

used for television reception, video or DVD play or text data that operates when the parking break is not applied must be installed

to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. This statement

should be reviewed with each state to allow for the safe and lawful use of this product while operating a vehicle.

To avoid risk of serious injury or possible violation of laws, make sure that the monitor is placed visible to the driver for no

other purpose than navigational or with the use of rear view camera only.

When Driving

The driver must not operate the LCD monitor.

(Operating the LCD monitor while driving is a distraction and may lead to an accident.)

As a safety factor, driving with the television, video or DVD player is prohibited.

Keep the unit at an appropriate sound level. Driving with the sound at a level that prevents you from hearing sounds outside

and around the car may cause an accident.

CAUTION

[Illustration in this manual]

Windows 2000 : Information for Microsoft®Windows®2000 Professional users.

Windows XP : Information for Microsoft®Windows®XP Professional users.

In some desktop settings, [Start] is displayed as [start].

Windows 98 : Information for Microsoft®Windows®98 users.

Windows NT : Information for Microsoft®Windows NT®Workstation Version 4.0 users.

Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation of the United States and/or

other countries.

PS/2®is a registered trademark of International Business Machines Corporation.

Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Precautions

When Car Washing

Do not expose the LCD monitor to water or excessive moisture. This could cause electrical shorts, fire or other damage.

When Parked

Parking in direct sunlight can produce very high temperatures inside your car. Let the interior of the car cool down before

switching the unit on.

Do not watch the LCD monitor with the engine off. It will consume battery power and may prevent the engine from starting.

Use Panasonic Technical Support

Do not attempt to disassemble or adjust this precision product. Contact Panasonic Technical Support.

For Installation

Be sure to install the LCD monitor in a position that does not obstruct the driver’s vision.

If the LCD monitor has been installed for the rear seat passengers, they must be careful to prevent injury by hitting their heads

on the LCD monitor in case of an accident.

Do not expose the LCD monitor to direct sunlight or excessive heat.

Be sure not to install the LCD monitor in a location at which it is exposed to water, hot air such as near heater duct, or where it

may stepped on.

Do not install the LCD monitor in an area where it would obstruct the operation of an air bag.

Ask a trained technician to install the unit. Installation and wiring require training and experience.

To be safe, ask the sales outlet where you purchased the unit to perform the installation.

When Operating

Make sure the LCD monitor is firmly secured and protected from strong impact, because this may cause a malfunction or possible

fire.

Thank you for purchasing the LCD Monitor for the Panasonic notebook computer series.

This LCD monitor features a touchscreen function, which makes computer operation possible by simply touching the surface of

the LCD monitor and pressing buttons – even when the computer is not being held.

Introduction

Operating Instructions ..................................... 1

RGB/Serial/Sound Cable .................................. 1

Sun Shade ......................................................... 1

PS/2 Cable ............................. 1

LCD Monitor ...................................................... 1

NOTE

A Port Replicator with a display port, serial port, and sound port is required for computers without these ports. For more

information, refer to the computer’s Reference Manual.

An optional keyboard (Model no. CF-VKBL01) is required to use the Function Buttons of the LCD Monitor.

Function Cable ...................... 1 Screws ................................... 2

Names and Functions of Parts

LCD

Power Switch

LED Indicator

Speaker

Does the same operation as

through F5 of the keyboard.

F1 Green : power on

Orange : power on but no VGA Sig-

nal or the cable is not con-

nected.

<Front>

Do not have anyone except an

authorized repairperson push

this button.

OSD buttons

page11

DC-IN 15.6 V

Serial Port

SERIAL I/F

Sound Port

Function Key Port

LINE IN

Fn KEY

RGB IN

Binder

Bind the cables and

fix firmly.

Function Buttons

Speaker

Green : Normal

The brightness can be adjusted freely.

Orange : Drops the brightness automatically due to an

increase in the internal temperature.

Red : The backlight goes OFF automatically due to

an increase in the internal temperature.

The application software allo-

cated to F11 is started up.

Emergency Button

Brightness Volume

down

Temperature LED Indicator

Speaker Volume

Reserve

DC-IN Jack

down

Display Port

1<Only for models without a display port, serial port, and sound port>

Connect your computer to the port replicator

( Operating Instructions of the port replicator)

2Remove the cover of the LCD Monitor

Remove the four screws, and remove the cover.

3Connect the LCD Monitor to your computer via the connection cables (included)

Mounting the LCD Monitor

Function Key Port Fn KEY

SERIAL I/F

Sound Port LINE IN

DC-IN Jack

Serial Port

Headphone Jack

Keyboard/Mouse Port

Serial Port

1RGB/Serial/Sound cable

2PS/2 cable

3Function cable

Display Port RGB IN

Display Port

DC-IN Jack

Keyboard

(commercially available

product)

Car Adaptor

(commercially available

product)

Car Adaptor

Port Replicator and Computer

Computer

LCD Monitor

(Model no. CF-VKBL01)

Example of connection

DC-IN 15.6 V

When installing the LCD monitor, locate the monitor under the

dashboard as shown in the figure to prevent the monitor from in-

terrupting the sight of the driver and to prevent the monitor from

being hit by direct sunlight.

Do not expose the computer to direct sunlight or excessive heat.

4Attach the cover of the LCD Monitor

Attach the four screws.

5Mount the Sun Shade

Attach the two screws (included).

6Mount the LCD Monitor

CAUTION

Use these M4 screw holes to mount the LCD Monitor.

1Save important data and close each application

2Display the shut down screen

Windows 2000 Windows 98 Windows NT

Select [Start] - [Shut Down].

Windows XP

Select [Start] - [Turn Off Computer].

3Confirm shut down

Windows 2000 Windows 98

Select [Shut Down], then select [OK].

Windows XP

Select [Turn Off].

Windows NT

Select [Shut down the computer?], then select [Yes].

The computer will power off automatically.

4Press the power switch of the LCD Monitor

The LCD Monitor will turn off after the computer is shut down completely.

Starting Up/Shutting Down

Starting Up

1Press the power switch of the LCD Monitor

The LCD Monitor will turn on.

2Turn your computer on (Operating Instructions of the computer)

3Select your application

You are able to start working on your computer.

Shutting Down (power off your computer)

This procedure is for shutting down the computer without using the standby or hibernation function.

( Reference Manual of the computer)

Some computers will turn on automatically when the LCD Monitor is turned on.

NOTE

Some computers will shut down automatically when the LCD Monitor is turned off according to power switch settings.

You can modify power switch settings on the following menus.

Windows 2000 : [Control Panel] - [Power Options] - [Advanced] - [When I press the power button on my computer]

Windows XP : [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced] - [When I press the

power button on my computer]

Windows 98 : [Control Panel] - [Power Management] - [Advanced] - [When I press the power button on my computer]

Windows NT : [Power Switch] of the [Power] Menu in the Setup Utility ( Reference Manual of the computer)

NOTE

Touchscreen

The LCD Monitor is equipped with a touchscreen function allowing you to perform the same operations as the touch pad or mouse

by touching the surface of the display with the finger or stylus.

The operation settings can be changed in the following menu.

Windows 2000 Windows 98 Windows NT : [Start] - [Programs] - [UPDD] - [Settings].

Windows XP : [Start] - [All Programs] - [UPDD] - [Settings].

For some models, you first need to install the touchscreen driver. Follow the installation instructions that come with the driver

CD-ROM.

For more information, ask your system administrator or contact Panasonic Technical Support.

NOTE

Handling the Touchscreen

Do not place any object on the surface or press down forcefully with sharp-pointed objects (e.g., nails), hard objects that can

leave marks (e.g., pencils and ball point pens).

Do not apply pressure within 5 mm of the perimeter of the display panel. The cursor may move to the edge of the display.

Do not operate the computer when such things as dust are on the screen, or allow contact with substances that could dirty the

touchscreen, such as oil. The cursor may not work properly in such cases.

When the touchscreen becomes dirty:

Use a dry soft cloth such as a gauze to clean the dirty areas.

Do not use benzene, thinner, or disinfectant- type alcohol.

Moving the cursor Clicking

Double-clicking Dragging

Cursor

Touch and hold the object (i. e.

file or icon), move the finger or

stylus on the surface (dragging

the object to the desired loca-

tion), then release the finger or

stylus.

Two quick

taps

One tap

The touchscreen function can not be used when using the full screen in [Command Prompt]*.

When the operation of panning (only LCD) is performed while the screen resolution is set to [1280× 1024 dots] or more, the

touchscreen function will not work properly.

If a change is made to the screen resolution, or the cursor can not be pointed correctly with the finger or stylus, be sure to

perform calibration.

*Windows 98 Windows NT : [MS-DOS prompt]

CAUTION

Advanced

Set the advanced settings.

When needed, the touchscreen can be configured using the following steps.

1Windows 2000 Windows 98 Windows NT

Select from the taskbar or select [Settings] from [Start] - [Programs] - [UPDD]

Windows XP

Select from the taskbar or select [Settings] from [Start] - [All Programs] - [UPDD]

The following screen will be displayed.

Configuring the Touchscreen

For more information, refer to [Help].

2Make necessary changes

3Select [OK]

Hardware

Set the hardware resources.

Match this setting with the set-

ting for [Touch Screen] in the

Setup Utility.

Calibration

Define the calibration setup.

Use when the cursor can not be pointed

correctly with the finger or stylus. (Needed

if the alignment of the touchscreen with the

visual image change or adjust the display

resolution).

Before you run the calibration, you need

to set the device at [Calibration settings

for] as followings.

[Device1] is for the computer

[Device2] is for the LCD Monitor

Devices

Configure the device controller.

About

Display the version number.

Status

Display the status of the controller.

Windows

Set the “double-click” settings.

General

Set the general settings and functions.

Events

Set the events that can be generated by a

controller.

Settings

Set the general protocol

settings.

Adjustments can be made when double-click operations are assumed by the computer although single-click operations

are intended, by clicking [Windows] from the display shown above and decreasing the value for [Time] in [Double

Click Settings].

Immediately run [Calibrate] when the number of points of calibration is changed.

It is also possible to change the double click speed for [Tap and Buttons]*.

It is important to note that when the double click speed for [Mouse] is changed, the double click time for [Windows] is

also changed.

*Windows 2000 Windows 98 Windows NT : in [Start] - [Settings] - [Control Panel] - [Mouse].

Windows XP : in [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].

You can use the touchscreen without changing the settings when the LCD Monitor is connected to Serial Port B. To

connect to Serial Port A, select [Hardware] and set [Settings For] to [Device 2] and [COM port] to [COM 1].

Rotate the display to landscape mode (0 degrees) before performing the calibration.

NOTE

Touchscreen

Andere Handbücher für CFVDL02 - LCD MONITOR/ LPTP

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Monitor Handbücher

Panasonic

Panasonic TH-37PWD8WK Bedienungsanleitung

Panasonic

Panasonic TH-37PR11UK Bedienungsanleitung

Panasonic

Panasonic PANAFLAT LC-90S Bedienungsanleitung

Panasonic

Panasonic TX-1413FHE Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PW3 Bedienungsanleitung

Panasonic

Panasonic TH-50LFC70U Bedienungsanleitung

Panasonic

Panasonic PT-51HX43 Bedienungsanleitung

Panasonic

Panasonic BTS901YN - COLOR MONITOR Bedienungsanleitung

Panasonic

Panasonic TH-85PF12E Bedienungsanleitung

Panasonic

Panasonic WVBM500 - B&W MONITOR Bedienungsanleitung

Panasonic

Panasonic CT-32HL43 Bedienungsanleitung

Panasonic

Panasonic TH-37PR11UH Bedienungsanleitung

Panasonic

Panasonic CF-VDW Series Verdrahtungsschema

Panasonic

Panasonic TH-42LF8U Bedienungsanleitung

Panasonic

Panasonic TH-85PF12U Bedienungsanleitung

Panasonic

Panasonic TH-65PHD7E Bedienungsanleitung

Panasonic

Panasonic TH-55LFV8W Bedienungsanleitung

Panasonic

Panasonic CYVM5800U - 5.8" CLR MONITOR/DVD Bedienungsanleitung

Panasonic

Panasonic WVCM1450 - COLOR MONITOR Bedienungsanleitung

Panasonic

Panasonic DTM3050W - 30" MONITOR Bedienungsanleitung

Panasonic

Panasonic WVBM1910 - VIDEO MONITOR Bedienungsanleitung

Panasonic

Panasonic TH32LHD7UY - LCD MONITOR Bedienungsanleitung

Panasonic

Panasonic BT-M2090Y Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Acer

Acer CB382CUR Bedienungsanleitung