Panasonic LP-GS Series Montageanleitung

LP-GS series

LP-RC series

LP-RF series

2018.7 panasonic.net/id/pidsx/global

ME-LPGS-SR-5

Laser Marker

Serial Communication

Command Guide

Preface

Thank you for purchasing our product.

For full use of this product safely and properly, please read this document carefully.

This product has been strictly checked and tested prior to its delivery. However, please make sure that this product

operates properly before using it. In case that the product becomes damaged or does not operate as specied in this

document, contact the dealer you purchased from or our sales ofce.

⿎General terms and conditions of this document

1. Before using this product, or before every starting operation, please conrm the correct functioning and performance

of this product.

2. Contents of this document could be changed without notice.

3. This document must not be partially or totally copied or revised.

4. All efforts have been made to ensure the accuracy of all information in this document. If there are any questions,

mistakes, or comments in this document, please notify us.

5. Please remind that we assume no liability for any results arising out of operations regardless of the above clauses.

⿎Disclaimer

The applications described in this document are all intended for examples only. The purchase of our products described in

this document shall not be regarded as granting of a license to use our products in the described applications. We do NOT

warrant that we have obtained some intellectual properties, such as patent rights, with respect to such applications, or that

the described application may not infringe any intellectual property rights, such as patent rights, of a third party.

⿎Trademark

• Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

• QR Code is a registered trademarks of DENSO WAVE INCORPORATED.

• Adobe, Adobe Logo, Adobe Reader, and Adobe Illustrator are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries.

• Bluetooth is a registered trademark of U.S.A. Bluetooth SIG Inc.

• All other product names and companies provided in this document are trademarks or registered trademarks of their

respective companies.

ME-LPGS-SR-5

Cautions in Handling

To reduce the risk of injury, loss of life, electric shock, re, malfunction, and damage to equipment or property, always

observe the following safety precautions.

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the

denotation is disregarded and improper use is performed.

DANGER

Denotes a potential hazard that will result in serious injury or death.

WARNING

Denotes a potential hazard that could result in serious injury or death.

CAUTION

Denotes a hazard that could result in minor injury.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specic operating procedure that must not be performed.

This symbols is used to alert users to a specic operating procedure that must be followed in order to

operate the unit safely.

This symbols is used to alert users to a specic operating procedure that must be performed carefully.

DANGER

• Never look at laser beam directly, through lens or

through any other optical components. Laser beam

radiation into the eye causes blindness or serious

damage to the eye.

Not only the direct beam of laser, but also diffused

reected beam is harmful.

• Never touch laser beam and avoid human skin, clothing and any other

ammable object from laser beam exposure directly.

Burning into deep skin might result and there is a risk of re.

ALWAYS FOLLOW THESE IMPORTANT

SAFETY PRECAUTIONS!

ME-LPGS-SR-5

WARNING

• Do not use this product anywhere where re is strictly prohibited, near inammable gas, objects or organic

solvents such as thinner or gasoline, or in dusty place. There is a risk of re.

• Do not use this product except for water-resistant part in wet place. In addition, never conduct wiring or

maintenance work with wet hands or when the product surface is wet. Otherwise, electric shock and/or

malfunction may result.

• Never disassemble the product.

Doing so may cause exposure to the laser beam or electric shock.

• Do not insert hands or objects between the gaps of the exhaust port or intake port. There is a risk of

electrical shock or injury.

• Take laser protection measures required to use Class 4 laser products subject to the local laws and

regulations of the country or region in which this laser product is used.

• To protect the operators' eyes, make it mandatory to wear goggles against laser beam

within the laser controlled area. The protective goggles can momentarily protect the

eyes against the scattered beam. Never look at the direct beam or reected beam

even when you are wearing the protective goggles.

• Set protective enclosure with proper reectance, durability and thermal resistance to enclose the laser

radiation area without leakage.

• Construct an interlock systems such as a function to stop laser radiation for the maintenance door of the

protective enclosure.

• After power supply of laser marker is turned off, laser safety manager must remove the key and keep it.

• Be sure to connect the head to the exclusive controller. It will cause exposure of laser beam and a failure if

it connects with any equipment other than the exclusive controller.

• Read all packaged guides and manuals thoroughly, and do not operate, install and connect the laser

marker with any other methods except the instructions provided in the manuals. If the product is used in a

manner not specied by the instruction, the safety protection and functions provided by the device may be

impaired and may cause injury, electrical shock or exposure of laser beam.

• Prior to wiring, cable connecting, and/or maintenance work, ensure that all the power switches are turned

off. Otherwise, electrical shock may result.

• The wiring and maintenance must be conducted by the electrical engineers or under their supervision.

Incorrect work may cause electrical shock.

• Connect ground wire before using. A failure or electrical leakage that occurs when the unit is not properly

grounded may result in electric shock.

• For LP-RF series, be careful neither to give strong power to the ber cable nor to nip it for installation.

Do not install the product to the systems that give excessive load acts on the ber cable, such as head

movement unit. If the ber cable is damaged, it may cause laser exposures.

ME-LPGS-SR-5

WARNING

• Remove the dust and/or gas which may be generated during the laser radiation with dust collector or

exhauster. Use an appropriate dust collector or exhauster for dust or gas generated.

Depending on the material of the objects, harmful dust and/or gas to the human body and the laser marker

may be generated.

Dust collector

Protective

enclosure

• When using the assist gas for laser processing, take safety precautions to protect operators from

exposure, ignition, toxic effect, excess or lack of oxygen.

• To carry this product, wear the non-slip gloves and safety shoes. Hold the product with both hands. Do not

hold the cables or connectors at carrying.

• For LP-RC/LP-RF series, carry the controller unit with two persons. Lifting or carrying without assistance

may cause of injury.

• Install this product in the stable place without vibration and shock.

• In case it falls down, it may cause injury.

CAUTION

• Do not touch the head surface of LP-RF series during and right after the operation. It becomes hot and

may cause burn injury.

ME-LPGS-SR-5

How to Read this Document

Symbol description

Notice “Notice” denotes any instructions or precautions for using this product. To prevent the damage or

malfunction of the product, observe these precautions fully.

Reference “Reference” denotes any hints for operation, detail explanations, or references.

Target model

This manual is subject to the following Laser Marker models.

In this manual, this product is called “laser marker”.

If the setting contents or specications vary by models, the target models are specied in the text.

In the text, multiple models may be described collectively, as shown in the table below.

Please remind that the illustration and the screen image may vary with the model.

Target model Description in the text

LP-GS051 LP-GS051-E LP-GS051 LP-GS051(-L) LP-GS series

LP-GS051-F LP-GS051-FE LP-GS051-FN

LP-GS051-L LP-GS051-LE LP-GS051-L

LP-GS051-LF LP-GS051-LFE LP-GS051-LFN

LP-GS052 LP-GS052-E LP-GS052

LP-GS052-F LP-GS052-FE LP-GS052-FN

LP-RC350S LP-RC350S LP-RC series

LP-RF200P LP-RF200P LP-RF series

ME-LPGS-SR-5

Type of manuals

For this product, the following manuals are prepared. Read each manuals and operate this product correctly and safely.

Also, save the manuals for future use.

Laser Safety Guide

This manual describes the items required for using this product correctly and safely. All users shall be required for read-

ing this manual.

Setup/Maintenance Guide

This manual describes the items required for introduction and installation of this product as well as for the maintenance

work.

• Product specications, external dimensions

• Installation and connection method

• Signal details, I/O rating, and timing chart when I/O is used for control

• Maintenance details

Laser Marker NAVI smart Operation Manual

Instruction manual for the laser marker conguration software “Laser Marker NAVI smart”. This manual describes the

procedure and method to operate the laser marker, and the screen operations to set marking contents.

Mainly the users that operate this laser marker for actual marking procedure shall be required for reading this manual.

Serial Communication Command Guide

This manual describes the communication commands to control this product externally using the serial communication

(RS-232C/Ethernet). It describes the communication settings, communication data formats, communication commands,

and the control samples.

Mainly the machine builder and system integrator shall be required for reading this manual.

Serial Communication Command Guide: LP-400/V compatible mode

This manual describes the communication commands to control this product externally using the compatible command

format with the previous models of LP-400/LP-V series.

Mainly the machine builder and system integrator shall be required for reading this manual.

Reference

• The PDF data of each manual is included on an attached CD-ROM “Laser Marker Smart Utility”.

• To read the PDF manual, Adobe Reader (Version X or later) of Adobe Systems Incorporated is required.

ME-LPGS-SR-5

Contents

Preface ……………………………………………………………………………… 2

Cautions in Handling ………………………………………………………………… 3

How to Read this Document ……………………………………………………… 6

1 Preparation of Command Control …………………………………12

1-1 Operation by External Devices ………………………………………………13

1-1-1 Operation method using external control device ………………………… 13

1-1-2 Operation procedure with external control ………………………………… 14

1-1-3 Settings before external control …………………………………………… 15

1-1-4 Remote mode settings ……………………………………………………… 18

1-2 Serial Communication Interfaces………………………………………………19

1-3 RS-232C …………………………………………………………………………20

1-3-1 Interface specications and connection …………………………………… 20

1-3-2 Communication settings (for command control) ………………………… 22

1-4 Ethernet …………………………………………………………………………23

1-4-1 Port specications and connection ………………………………………… 23

1-4-2 Communication settings …………………………………………………… 24

1-4-3 Connecting to external control devices and its setting sample ………… 25

2 Communication Control Basics ……………………………………26

2-1 Communication Data Types ……………………………………………………27

2-1-1 Request data ………………………………………………………………… 27

2-1-2 Response data ……………………………………………………………… 27

2-2 Communication Sequence ……………………………………………………28

2-3 Communication Data Format …………………………………………………31

2-3-1 Basic data format …………………………………………………………… 31

2-3-2 Request data ………………………………………………………………… 32

2-3-3 Response data ……………………………………………………………… 33

2-3-4 Omitting request data ……………………………………………………… 36

2-3-5 Character input method …………………………………………………… 37

2-3-6 Character data input method ……………………………………………… 38

2-4 Command Reception Condition ………………………………………………44

2-4-1 Commands requiring pre-set ……………………………………………… 44

2-4-2 Command reception permission …………………………………………… 44

2-4-3 Commands acceptable only with the shutter closed …………………… 45

2-4-4 Commands acceptable during alarm/warning occurrence ……………… 45

2-5 Communication Check …………………………………………………………46

2-6 Control Sample …………………………………………………………………47

ME-LPGS-SR-5

3 Data Format for Each Command …………………………………52

3-1 Command List …………………………………………………………………53

3-2 Command Description Details …………………………………………………57

3-3 Operation Control Commands…………………………………………………58

3-3-1 Command reception permission: MKM …………………………………… 58

3-3-2 Laser pumping: LSR ………………………………………………………… 59

3-3-3 Shutter open/close: SHT …………………………………………………… 60

3-3-4 Marking trigger: MRK ……………………………………………………… 61

3-3-5 Marking trigger (at regular intervals): MRK ……………………………… 62

3-3-6 Trigger mode: TMS ………………………………………………………… 63

3-3-7 Trigger delay: DLY …………………………………………………………… 65

3-3-8 Guide laser: GID …………………………………………………………… 66

3-3-9 Status checking: STS ……………………………………………………… 68

3-3-10 Marking end verication: MST …………………………………………… 69

3-4 File Setting Commands ………………………………………………………71

3-4-1 File selection by number: FNO …………………………………………… 71

3-4-2 File selection by name: FNN ……………………………………………… 72

3-4-3 Overwrite le: FOR ………………………………………………………… 73

3-4-4 Save le to different No.: FRG……………………………………………… 73

3-4-5 File name: FNM ……………………………………………………………… 74

3-5 Character Setting Commands …………………………………………………75

3-5-1 Character entry: STR ……………………………………………………… 75

3-5-2 Character entry per trigger: SIN …………………………………………… 77

3-5-3 Character object settings: STC …………………………………………… 80

3-5-4 Reference character: SST ………………………………………………… 83

3-5-5 Applying reference character: LNO ……………………………………… 84

3-6 Functional Character Commands ……………………………………………85

3-6-1 Counter settings: CNT ……………………………………………………… 85

3-6-2 Counter reset: CTR ………………………………………………………… 86

3-6-3 Counter reset timing: CRC ………………………………………………… 87

3-6-4 Expiry date/time settings: LMT …………………………………………… 88

3-6-5 Lot settings: LTC …………………………………………………………… 89

3-6-6 Lot period/character: LTS…………………………………………………… 90

3-6-7 Registered character settings: RKC ……………………………………… 92

3-6-8 Registered character strings: RKS ………………………………………… 93

3-7 Bar Code/2D Code Settings Commands ……………………………………94

3-7-1 Bar code/2D code object settings: BRF …………………………………… 94

3-7-2 Human readable text settings: BRV ……………………………………… 104

3-7-3 Module lling of 2D codes: BRT …………………………………………… 106

3-7-4 Laser settings per 2D code pattern: BRP ………………………………… 109

3-7-5 Quiet zone lling of 2D codes: BRQ ……………………………………… 111

3-8 Command for graphic data settings ……………………………………… 113

ME-LPGS-SR-5

3-8-1 Graphic le (VEC format le) : CDF ……………………………………… 113

3-8-2 Graphic object settings (VEC format le) : CDC ………………………… 114

3-9 Point Radiation Commands ………………………………………………… 116

3-9-1 Point radiation parameters: PRD…………………………………………… 116

3-10 Object Management Commands ………………………………………… 120

3-10-1 Object creation: CRE ……………………………………………………… 120

3-10-2 Object deletion: DEL ……………………………………………………… 121

3-10-3 Object marking specication: ENA ……………………………………… 122

3-11 Layout/Position Adjustment Commands ………………………………… 123

3-11-1 Object coordinates: POS…………………………………………………… 123

3-11-2 Object movement: POR …………………………………………………… 124

3-11-3 Object group settings: GRP ……………………………………………… 125

3-11-4 File settings: ALC …………………………………………………………… 127

3-11-5 Marking position and laser power adjustment per trigger: SEO ……… 128

3-11-6 External offset settings: OFC ……………………………………………… 131

3-11-7 External offset values: OFS ……………………………………………… 132

3-11-8 Step & repeat settings: SRC ……………………………………………… 134

3-11-9 Step & repeat ne-adjustment: SRA……………………………………… 136

3-12 On-the-y Marking Commands …………………………………………… 142

3-12-1 Motion settings for all les: FLY …………………………………………… 142

3-12-2 Motion settings for current le: FLF ……………………………………… 143

3-13 Laser Setting Commands ………………………………………………… 145

3-13-1 Laser settings: LSC ………………………………………………………… 145

3-13-2 Laser correction by object: MOD ………………………………………… 147

3-13-3 Pulse cycle correction by object: PCC …………………………………… 149

3-14 Maintenance Commands ………………………………………………… 151

3-14-1 Laser radiation for measurement: SPT…………………………………… 151

3-14-2 Error code: ENO …………………………………………………………… 153

3-14-3 Alarm reset: ARS …………………………………………………………… 153

3-15 System Settings Command ……………………………………………… 154

3-15-1 System clock: YMD ………………………………………………………… 154

3-15-2 Command mode: RSM …………………………………………………… 155

Troubleshooting……………………………………………………… 156

Troubleshooting …………………………………………………………………… 157

Error Indication …………………………………………………………………… 169

Alarm: E001 - E599 ………………………………………………………………… 169

Warning: E600 - E799 ……………………………………………………………… 173

Character Code Table ……………………………………………… 181

ASCII Code………………………………………………………………………… 182

Shift JIS Code …………………………………………………………………… 183

ME-LPGS-SR-5

Andere Handbücher für LP-GS Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Drucker Handbücher

Panasonic

Panasonic KX-P7100 Bedienungsanleitung

Panasonic

Panasonic SP22P Bedienungsanleitung

Panasonic

Panasonic KX-P8415 Service-Handbuch

Panasonic

Panasonic KX-P1131 - KX-P 1131 B/W Dot-matrix Printer Bedienungsanleitung

Panasonic

Panasonic KX-P1150 - KX-P 1150 B/W Dot-matrix Printer Bedienungsanleitung

Panasonic

Panasonic KX-P3626 Bedienungsanleitung

Panasonic

Panasonic WORKIO CL500 Anleitung zur Verwendung

Panasonic

Panasonic KX-P7100 Bedienungsanleitung

Panasonic

Panasonic DP-C406 Bedienungsanleitung

Panasonic

Panasonic FP-D355 Bedienungsanleitung

Panasonic

Panasonic JT-H200PR Series Bedienungsanleitung

Panasonic

Panasonic KX-P3196 - KX-P 3196 B/W Dot-matrix Printer Bedienungsanleitung

Panasonic

Panasonic KX-P7500 Bedienungsanleitung

Panasonic

Panasonic WORKIO DP-CL21 Bedienungsanleitung

Panasonic

Panasonic KX-MC6020 Bedienungsanleitung

Panasonic

Panasonic Workio DP-CL18 Kurzanleitung

Panasonic

Panasonic JT-H200PR Series Bedienungsanleitung

Panasonic

Panasonic KX-P1524 Bedienungsanleitung

Panasonic

Panasonic Network Printing DP2000/2500 Bedienungsanleitung

Panasonic

Panasonic KX-P7110 Leitfaden

Panasonic

Panasonic JT-H340PR Series Bedienungsanleitung

Panasonic

Panasonic KX-P7110 Bedienungsanleitung

Panasonic

Panasonic SP28P Betriebsanleitung

Panasonic

Panasonic KX-P 8410 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung