Panasonic PT-52LCX15K Bedienungsanleitung

LSQT1132 A

Multimedia Projection HDTV

Operating Instructions

PT-52LCX15KModel No.

Before connecting, operating or adjusting this product, please read the instructions completely.

Please keep this manual for future reference.

* The presence of the DTV certification mark indicates that this product will successfully

receive digital television transmissions that conform to any and all of the video formats

described in the ATSC Digital Television Standard.

ATSC CERTIFIED *

DIGITAL TELEVISION

1) Read these instructions before using, connecting or adjusting this product.

2) Keep these instructions for future reference.

3) Heed all warnings on the product and in this Operating Instructions manual.

4) Follow all instructions carefully.

5) Do not use this apparatus near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in

a wet basement or near a swimming pool, and the like. Do not place objects filled with water, such as a vase or

the like, on top of this unit.

6) Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Openings in the cabinet are provided for ventilation to ensure reliable operation and to protect it from

overheating. Never block openings by placing the product on a bed, sofa or similar surfaces.

8) Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produces heat. Do not install in a built-in installation such as a bookcase or rack,

unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15) Because the temperature of the lamp unit is elevated immediately after its use, a direct touch to it may cause

burns. Replace the lamp unit only after it has cooled.

Note to CATV System Installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as practical.

WARNING: To reduce the risk of electric shock, do not remove cover or back. No

user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol warns the

user that uninsulated

voltage within the unit may

have sufficient magnitude

to cause electric shock.

Therefore, it is dangerous

to make any kind of

contact with any inside part

of this unit.

This symbol alerts the

user that important

literature concerning

the operation and

maintenance of this unit

has been included.

Therefore, it should be

read carefully in order to

avoid any problems.

The pictorial

representation of a hot

surface within a triangle

is intended to tell the

user that parts inside the

product are a risk of burns

to persons.

WARNING

To reduce the risk of electric shock, fire, injury to persons or damage to this product:

IMPORTANT SAFETY INSTRUCTIONS

Getting Started

The Lamp is a consumable item and has a limited life.

The lamp should be changed as soon as possible once the lamp warning message appears. (See page 66.)

If the lamp is damaged, please contact your nearest dealer.

Due to the characteristics and use conditions of individual lamps, the lamp may cease to light before the

stated lamp life.

Influences of frequent lighting, continuous light use for over 24 hours, the number of times lit, the length of

time between lightings, etc. may shorten lamp life.

(Because of this, we recommend having a replacement lamp on hand.)

Trademarks

• VGA and XGA are trademarks of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Computer, USA.

• SVGA is trademark of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

• Equipped with -TV Noise Reduction for true MTS reproduction. -TV Noise Reduction is required for good stereo

separation and audio fidelity. is a registered trademark, and is licensed by Technology Licensing.

WARNING

AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW

CHILDREN TO HANDLE THE SD CARD.

CAUTION

HDMI, the HDMI logo and

High Definition Multimedia

Interface are trademarks or

registered trademarks of HDMI

Licensing LLC.

SD Logo is a trademark.

(1) This Projection Display is intended to be used with the following TV stand: model TY-52LC65C for the PT-52LCX15K.

Use with other stands may result in the Projection Display becoming unstable, possibly causing injury.

(2) This Projection Display should not be exposed to direct sunlight, extreme temperatures or moisture, as this can

result in serious irreparable damage.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP5510752

and 5736897. BBE and BBE symbol are registered

trademarks of BBE Sound, Inc.

U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 6,381,747; and 6,516,132.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended

for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering

or disassembly is prohibited.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

License description: To view the license information for software used in this product, press the Menu button and

select “Setup”→“About”→“License”. (See page 57).

Note:

• Do not allow a still picture to be displayed for an extended period, as this can cause a permanent afterimage to remain on this

unit. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE. DO NOT PLACE OBJECTS FILLED WITH WATER, SUCH AS A VASE OR THE LIKE, ON TOP OF

THIS APPARATUS.

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new

Projection Display.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain

them for future reference.

Retain your purchase receipt also, and record the serial number of your set in the space provided on the rear cover

of these instructions.

The ClassⅡinsulation symbol (square within a square) indicates that this product has been evaluated

and tested to comply with ClassⅡinsulation requirements.

Dear Panasonic Customer

Getting Started

Start !

Use

Now !

Enjoy

More !

Other

Information !

IMPORTANT SAFETY INSTRUCTIONS ...............................................2

Before Using ..............................................................................................6

Location of Controls .................................................................................9

Installation................................................................................................12

Power ON / OFF .......................................................................................24

Basic Menu Navigation ...........................................................................26

Tuning channels......................................................................................28

Projection Display operation..................................................................32

ASPECT Controls ....................................................................................36

Split screen ..............................................................................................37

Picture Adjustments................................................................................39

Audio Adjustments..................................................................................42

Sleep Timer Feature ................................................................................44

Lock Feature ............................................................................................45

Photo Viewer............................................................................................49

Setup Features ........................................................................................54

Remote Control Quick Reference Guide (Operating peripheral equipment)

......58

Warning Indicators..................................................................................65

Replacing the lamp unit..........................................................................66

Troubleshooting ......................................................................................68

Specifications ..........................................................................................69

Cleaning / Panasonic Friendly Recommendations to Customer .........70

Limited Warranty .....................................................................................71

Other Information ....................................................................................72

Index .........................................................................................................79

Table of Contents

Getting Started Basic Operation InformationAdvanced Operation

Accessories

1. Remote Control (EUR7627Z70)

2. Batteries 2 “AA”

Viewing position

To optimize your viewing comfort, please follow the

viewing guidelines shown in the diagrams below.

If viewing for an extended period of time, sit as far back

from the screen as possible.

70º

At least 1.8 m

70º

30º

Receiver Location

Locate for comfortable viewing. Avoid placing where

sunlight or other bright light (including reflections) will fall

on the screen.

Use of some types of fluorescent lighting can reduce

Remote Control transmitter range.

Adequate ventilation is essential to prevent internal

component failure. Keep away from areas of excessive

heat or moisture.

Optional External Equipment

The Video / Audio connection between components can

be made with shielded video and audio cables. For best

performance, video cables should utilize 75 Ωcoaxial

shielded cables. Cables are available from your dealer

or electronic supply house.

Before you purchase any cables, be sure you know

what type of output and input connectors your various

components require. Also determine the length of cable

you’ll need.

Safety Precaution

Please take safety precautions to prevent the unit from

falling over.

WARNING

The unit may tip or fall if not situated on a stable

surface, if pushed or during an earthquake. Use

a strong rope or chain (not included) to fasten the

Projection Display firmly to a strong wall support.

Before Using

At least 1.8 m

Getting Started

Requires two AA batteries (supplied).

2. Install the batteries as shown in the battery

compartment.

(Polarity + or - must match the markings in the

compartment).

Two AA size

Remote Control Battery Installation

CAUTION

1. While pressing in on the catch, open cover in

direction of arrow.

3. Press cover in direction of arrow until it snaps

shut.

Incorrect battery installation can cause the batteries to

leak, leading to personal injury and/or damage to the

remote control.

Observe the following precautions:

1. Batteries should always be replaced as a pair.

Always use new batteries when replacing the old

set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon”

with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble,

heat or burn used batteries.

5. Battery replacement is necessary when the remote

control acts sporadically or stops operating the

Projection Display set.

Helpful Hints:

(1) For frequent remote control users, replace old

batteries with Alkaline batteries for longer battery

life.

(2) Whenever you remove the batteries, you may

need to reset the remote control infrared

codes. We recommend that you record the code

on pages 58-59, prior to setting up the remote.

Reset All Memory Functions

Use when moving unit to a new location, or First Time

Setup needs to be redone.

Press the VOL- button on the unit

and OK button on the Remote

control at the same time for more

than 3 seconds. When reset is done,

power shuts off automatically.

VOL VOL

CC (Closed Captioning)

OSD (On-Screen Display)

MSO (Multiple system owner/operator)

Dolby Digital

This is a method of coding digital signals developed by

Dolby Laboratories. Apart from stereo (2-channel) audio,

these signals can also be multichannel audio. A large

amount of audio information can be recorded on one

disc using this method.

PCM (pulse code modulation)

These are uncompressed digital signals, similar to those

found on CDs.

DTV (Digital Television)

Name of the process whereby television picture and

sound signals are changed to digital code for receiving

and transmitting.

HDTV (High Definition Television)

Television with improved picture quality by increasing

vertical and horizontal resolution.

Glossary and Acronyms

ATSC (Advanced Television Systems Committee)

Standardization body that developed the Digital

Television Terrestrial formats.

HDMI (High Definition Multimedia Interface)

Interface that supports every uncompressed digital

format as well as all existing multi-channel audio format

on a single cable.

JPEG (Joint Photographic Experts Group)

A system used for compressing/decoding color still

pictures.

MPAA (Motion Picture Association of America)

Guild governing rating assignments to movies.

NTSC (National Television Systems Committee)

Standardization body that developed the Analog

Television Terrestrial formats.

Password

A four (4) digit code a user must provide in order to

perform a function.

Before Using (continued)

Getting Started

Note:

• This section describes TV mode only. For other modes, see

pages 58-64.

Illuminated Remote Control

POWER

SAP

LIGHT

123

456

RETURN

VOL VOL

R-TUNE

REW

TV/VCR

SPLIT SWAP

DVD/VCR CH

OPEN/CLOSE

PLAY

PAUSE STOP REC

PROG

TV/VIDEO

SLEEP EXIT

TV VCR DVD

DTV RCVR

DBS/CBL

AUX

Location of Controls

1POWER Press to turn ON and OFF.

TV Sets the remote to communicate

with television or digital television.

VCR, DVD,

DTV, RCVR,

DBS/CBL, AUX

Sets the remote to communicate

with other devices.

3TV/VIDEO Changes Input source.

4SD Accesses the Photo Viewer

feature.

5ASPECT Changes display aspect ratio.

6MUTE Press to mute sound.

7VOL -+ / ◄► Press to adjust TV sound and

navigate in menus.

8OK Press to select menu and sub-

menu items.

9MENU Press to display Main Menu.

10 Number

Press numeric keypad to select

any channel or press to enter

alphanumeric input in menus.

11 R-TUNE Press to switch to previously

viewed channel or input modes.

12 REW While remote is in VCR or DVD

mode, press to rewind.

13 PLAY While remote is in VCR or DVD

mode, press to play.

14 PAUSE While remote is in VCR or DVD

mode, press to pause.

15 TV/VCR Press to switch to TV or VCR.

16 SAP

In analog mode, press to access

audio modes (Stereo, SAP or

Mono). In digital mode, press to

access next audio track.

17 LIGHT

Lights all buttons. The selected

mode button (TV, VCR, etc.)

flashes.

18 EXIT Press to exit menus.

19 SLEEP

Press to set unit to shut itself off

after a preselected amount of

time.

20 FAVORITE Press to operate the Favorite

channel list function.

21 RECALL Press to display or delete Channel

banner.

22 RETURN Press to return one step

backward in menus

23 CH

/ ▲▼ Press to change channels and

navigate in menus.

24 PROG

Press after entering major channel

numbers to enter minor (-)

channel numbers.

25 FF While remote is in VCR or DVD

mode, press to fast forward.

26 REC While remote is in VCR mode,

press to record.

27 STOP While remote is in VCR or DVD

mode, press to stop.

28 OPEN/CLOSE While remote is in DVD mode,

press to open or close DVD tray.

SWAP Press to swap Main screen with

Split screen.

DVD/VCR CH

While remote is in VCR or DVD

mode, press to change channels

for DVD or VCR.

SPLIT Press to display or delete Split

screen.

DVD/VCR CH

While remote is in VCR or DVD

mode, press to change channels

for DVD or VCR.

Controls and Terminals on the Projection Display

Front View

1MENU Press to display Main

Menu.

2OK Press to select menu and

sub-menu items.

3TV/VIDEO Changes Input source.

4VOL -+ / ◄► Press to adjust TV sound

and navigate in menus.

5CH

/ ▲▼ Press to change channels

and navigate in menus.

12 3 4 5

1TEMP indicator

Lights up when

temperature inside unit is

abnormal. (P. 65)

2Remote Control

Sensor

Receives infrared signal

from Remote Control.

3LAMP indicator

Lights up when the lamp

unit is malfunctioning. (P.

65)

4S-Video Input

Connector 3

Connect from other

component. (Video 3)

5Video Input

Connector 3

Connect from other

component. (Video 3)

Audio Input

Connector (Shared

with both Video 3

and PC)

Connect from other

component. (Video 3)

Connect from PC. (PC)

7PC (RGB) Input

Connector Connect from PC. (PC)

8SD CARD Slot Insert SD Card.

12 3 45 68

POWER button /

POWER indicator

Location of Controls (continued)

Remote Control

Sensor

Note:

• Buttons listed above operate the same as remote

control buttons of the same name.

Open

Using your finger,

slide Cover in

direction of arrow to

open.

Cover

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Projektionsfernsehen Handbücher

Panasonic

Panasonic TX-43P250 Bedienungsanleitung

Panasonic

Panasonic TX-51P100 series Bedienungsanleitung

Panasonic

Panasonic TX-47P950A Bedienungsanleitung

Panasonic

Panasonic TX-51P100 series Bedienungsanleitung

Panasonic

Panasonic TX-47P600X Bedienungsanleitung

Panasonic

Panasonic TC-43P250H Bedienungsanleitung

Panasonic

Panasonic TX-47WG25 Series Bedienungsanleitung

Panasonic

Panasonic PT50DL54 - 50" DLP TV Bedienungsanleitung

Panasonic

Panasonic PT-51G46C Bedienungsanleitung

Panasonic

Panasonic PT52DL10 - 52" DLP REAR PJ HDTV Bedienungsanleitung

Panasonic

Panasonic PT56WXF90 - DIGITAL PTV MONITOR Bedienungsanleitung

Panasonic

Panasonic TX-51P100X Bedienungsanleitung

Panasonic

Panasonic PT-61DLX75 Bedienungsanleitung

Panasonic

Panasonic PT-56TWD63 Bedienungsanleitung

Panasonic

Panasonic TC-51P15 Series Bedienungsanleitung

Panasonic

Panasonic PT52DL10 - 52" DLP REAR PJ HDTV Bedienungsanleitung

Panasonic

Panasonic PT52LCX66 - MULTI MEDIA DISPLAY Bedienungsanleitung

Panasonic

Panasonic PT53TW53G - 53" PROJECTION TV HD Bedienungsanleitung

Panasonic

Panasonic TX-51P800X Bedienungsanleitung

Panasonic

Panasonic PT-61HX41 Bedienungsanleitung

Panasonic

Panasonic PT-51DX80V Bedienungsanleitung

Panasonic

Panasonic TX-43P800H Bedienungsanleitung

Panasonic

Panasonic PT 56DLX76 Bedienungsanleitung

Panasonic

Panasonic TX-47P600H Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Sony

Sony KP-57WS500 - 57" Hi-scan 1080i™ 16:9 Projection... Benutzerhandbuch

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Sony

Sony KP-51DS1U Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Sony

Sony GRAND WEGA KDF-55XS955 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung