Panasonic WJHD100 - DIGITAL DISC RECORDE Bedienungsanleitung

ENGLISH

FRANÇAIS

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Model No. WJ-HD100

Digital Disk Recorder

Operating Instructions

Digital Disk Recorder WJ-HD

OPERATE

TIMER HDD

ALARM

SUSPEND

DAYLIGHT

SAVINGS

FULL

LOCK

MEMORY CARD DISPLAY SELECT STOP

LCD CONTRAST

PLAY

SETUP/ESC

REC

PUSH

PAUSE

SET

ALARM SEARCH

STEP REW/FF

MODE SELECT

The serial number of this product may be found on the bot-

tom of the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of your

purchase to aid identification in the event of theft.

Model No. WJ-HD100

Serial No.

Caution:

Before attempting to connect or operate this product,

please read the label on the bottom. NOTE: This equipment has been tested and found to com-

ply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference

when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example -

use only shielded interface cables when connecting to com-

puter or peripheral devices). Any changes or modifications

not expressly approved by the party responsible for compli-

ance could void the user’s authority to operate this equip-

ment.

For U.S.A

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and mainte-

nance (servicing) instructions in the litera-

ture accompanying the appliance.

CAUTION: TOREDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

ENGLISH VERSION

CONTENTS

PREFACE .................................................................................................................. 4

FEATURES ................................................................................................................ 4

PRECAUTIONS ......................................................................................................... 5

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS .................................. 6

■ Front View ......................................................................................................... 6

■ Rear View .......................................................................................................... 7

INSTALLATION ......................................................................................................... 9

■ Mounting in the Rack ........................................................................................ 9

CONNECTION .......................................................................................................... 10

■ Basic Connection ............................................................................................. 10

■ Connections with PS•Data Equipment ............................................................. 11

■ Series Connection ............................................................................................ 12

■ Alarm Terminal Connection .............................................................................. 13

■ RS-232C Connection ........................................................................................ 13

■ PS•Data Connection ......................................................................................... 13

■ Mode Switch Setting ......................................................................................... 14

SETUP PROCEDURES ............................................................................................. 15

■ Prior to Setup .................................................................................................... 15

■ Initializing .......................................................................................................... 18

■ WJ-HD100 SETUP MENU ................................................................................. 19

■ SYSTEM SETUP ................................................................................................ 21

■ REC SETUP ...................................................................................................... 24

■ ALARM SETUP ................................................................................................. 27

■ INTERNAL TIMER REC ..................................................................................... 29

■ COMMUNICATION SETUP ............................................................................... 30

■ SYSTEM INFORMATION .................................................................................. 31

OPERATING PROCEDURES .................................................................................... 32

■ Sequence of LCD Displays (in operation) ........................................................ 32

■ Recording ......................................................................................................... 34

■ Playback ........................................................................................................... 35

■ Alarm Operation ................................................................................................ 38

■ Copy to CompactFlash Card ............................................................................ 39

■ Lock/Unlock Buttons ......................................................................................... 41

TROUBLESHOOTING .............................................................................................. 42

SPECIFICATIONS ..................................................................................................... 43

APPENDIX ................................................................................................................ 44

■ Remote Control From System Controller .......................................................... 44

■ SERIES RECORDING ....................................................................................... 45

■ Communication Protocol .................................................................................. 47

ENGLISH

TRADEMARKS

SanDisk and CompactFlash are trademarks of SanDisk Corporation.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

PREFACE

The Digital Disk Recorder WJ-HD100 records information

on a large capacity hard disk and is designed for use within

a surveillance system. It records up to 960 hours of surveil-

lance images (in long-time mode) on a field basis. There

are 10 selectable picture quality levels and the field rate

can be selected as well. Besides recording and playback,

the WJ-HD100 features versatile interfaces with alarm sen-

sors, a CompactFlash card, RS-232C devices and PS•Data

equipment. Interactive menus are provided for system

setup, recording setup, alarm setup and so forth.

FEATURES

• High quality still picture

Still pictures are recorded on the disk after compres-

sion in the JPEG image file format.

• No need to replace a video tape

Thanks to the large disk capacity, there is no more

need to replace the recording medium. The recording

time can be extended to 16 times that of a single unit

by operating multiple units in series.

• Easy access to the desired record

Time & Date search and alarm event search make

retrieval easy.

• CompactFlash card slot

Pictures stored on the disk can be copied to a

CompactFlash card in the card slot to browse through

them on a personal computer.

• Various alarm modes

A different picture quality can be selected for alarm

recording and for ordinary recording.

A buzzer can be set up to beep when an alarm input is

received.

Besides the physically connected sensors, a built-in

motion detector can be set up to generate alarm.

• Remote control

An RS-232C port enables the recorder to communicate

with a personal computer or other RS-232C devices.

A modular terminal is equipped for communication with

PS•Data devices in the RS-485 chain.

PRECAUTIONS

• Refer all work related to the installation of this product

to qualified service personnel or system installers.

• Avoid condensation on the surface of the hard disk.

Wait until the dew evaporates if any of the following

case takes place.

The recorder is moved to a place significantly differ-

ent in temperature or humidity.

The recorder is moved out of an air-conditioned

room.

The recorder is placed in an extremely humid

place.

The recorder is placed in a room where a heater

has just been turned on.

• Consumable parts

Contact your dealer for replacement of the following

parts when the time comes:

Built-in hard disk needs replacement after around

30 000 hours of operation.

Cooling fan also needs replacement after around

30 000 hours of operation.

Backup battery has a lifetime of around five (5)

years in an ordinary environment.

• Do not block the ventilation opening or slots on the

cover.

To prevent the appliance from overheating, place it at

least 5 cm (2 inches) away from the wall.

• Do not drop metallic parts through slots.

This could permanently damage the appliance. Turn

the power off immediately and contact qualified service

personnel for service.

• Handle the appliance with care.

Do not strike or shake, as this may damage the appli-

ance.

• Fully charge up the backup battery.

Keep the appliance turned on for at least 48 hours to

recharge the backup battery. This procedure is neces-

sary when using the appliance for the first time or after

it has been unplugged for a long time from the AC out-

let. Insufficient charging of the battery may cause era-

sure of settings if the AC power supply should fail.

• We recommend that you note down your settings and

retain them. Power or battery failure may erase settings

you entered.

• Do not expose the appliance to water or moisture, nor

try to operate it in wet areas.

• Do not use strong or abrasive detergents when clean-

ing the appliance body.

Use a dry cloth to clean the appliance when it is dirty.

When the dirt is hard to remove, use a mild detergent

and wipe gently.

• Do not operate the appliance beyond its specified tem-

perature, humidity or power source ratings.

Do not use the appliance in an extreme environment

where high temperature or high humidity exists. Use the

appliance at temperatures within +5°C to +45°C (41°F

to 113°F) and a humidity below 90 %.

The input power source for this appliance is 120 V AC

60 Hz.

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

■Front View

OPERATE

TIMER HDD

ALARM

SUSPEND

DAYLIGHT

SAVINGS

FULL

LOCK

MEMORY CARD DISPLAY SELECT STOP PLAY REC

PUSH– PAUSE SET

ALARM SEARCH STEP REW/FF

PLAY MODE SELECT

SETUP/ESC

qw e

tyuio!0 !1 !2 !3 !4

!5 !6 !7 !8

LCD CONTRAST

Digital Disk Recorder WJ-HD

qOperate Indicator [OPERATE]

Lights while the power switch on the rear is turned on.

wTimer Record Reservation Indicator [TIMER]

Lights when a reservation is made for internal timer

recording.

eAlarm Suspension Indicator [ALARM SUSPEND]

Lights when an alarm is activated while alarm suspen-

sion is selected. The alarm will be logged in the event

history, but recording is suspended and the buzzer will

not sound.

rDaylight Saving Button [DAYLIGHT SAVINGS]

Press the recessed button with a pin to advance the

internal clock by one hour to daylight saving time, or to

set it back to normal time. While the clock is on day-

light saving time, an asterisk * appears in the time and

date display on the LCD and on the video monitor.

tHDD Access Indicator [HDD]

Lights while the disk is being accessed.

yFull Indicator [FULL]

Blinks when the remaining disk capacity reaches the

preset value, and lights when the disk is full.

uLock Indicator [LOCK]

Lights when buttons and JogDial on the front panel are

disabled.

iMemory Card Slot [MEMORY CARD]

Open the lid to insert the CompactFlash card into the

slot or to remove it from the slot. The card is used to

store still pictures for browsing through them on a per-

sonal computer.

oLCD

Displays setup parameters while working with menus,

or the operating status while recording or playing back.

!0 LCD Button [DISPLAY SELECT]

There are five positions to press; up, down, left, right

and center. Press the appropriate positions to select a

parameter on the LCD.

!1 LCD Contrast Control [LCD CONTRAST]

Adjust the LCD contrast by rotating the control knob

with a small screw driver.

!2 Stop and Setup/ Escape Button

[■STOP] [SETUP/ESC]

Pressing this button in any mode other than menu setup

stops recording or playback.

Holding down this button for 2 seconds calls up setup

menus or escapes from the setup.

Press this button to go back one step to the previous

selection in the setup menu.

!3 Play Button [5PLAY]

Press this button to start playback. The LED lights while

playing back, and blinks while pausing or searching.

!4 Recording Button [●REC]

Press this button to start recording. The LED lights while

recording, and blinks while alarm recording.

!5 to !7 are PLAY MODE SELECT buttons that also specify

the JogDial performance in the selected play mode. See

pages 35, 36 and 37 for further details.

!5 Alarm Search Button [ALARM SEARCH]

Press this button to search for a desired record in the

alarm log. The LED lights in the alarm search mode.

!6 Step and Down Button [STEP A

❚❚

B] [C]

Press this button to start playing back still pictures field

by field. The LED lights in the step playback mode.

Press this button to move the cursor downward in a

setup menu on the monitor.

!7 REW/FF and Up Button [REW/FF 1/2] [D]

Press this button to rewind or fast-forward the recorded

field. The LED lights in the REW/FF mode.

Press this button to move the cursor upward in a setup

menu on the monitor.

!8 JogDial [PUSH –

❚❚

PAUSE] [SET]

Press the JogDial to pause or restart playback.

Rotate the JogDial to access the desired field while

rewinding, fast-forward and playing back.

Rotate the JogDial to search the oldest picture record-

ed on the disk for playing back in chronological order.

Rotate the JogDial to select a parameter in a setup

menu.

Press the JogDial to enter the selected parameter and

move the cursor to the next position on a setup menu.

Hold down the JogDial to copy still pictures to the

CompactFlash card.

■Rear View

SIGNAL GND

ALARM

SERIES

RECORD

TIME

ADJUST

REMOTEMODEDATARS-232CVIDEO

OUT

AUDIO MONITOR OUT

(PLAY)

CAMERA

SW OUT

POWER

OFF

JOG-CLICK

JOG-LEFT

JOG-RIGHT

ALARM SEARCH

STEP

REW/FF

STOP/SETUP

PLAY

REC

OUT

PLAY OUT

REC OUT

AUTO OFF OUT

DISK END OUT

OUT

RECALL

(EXT REC)

OUT

RECOVER OUT

RESET IN

@1 @3 @4

@5 #0 #1 #2 #3 #4

@6 @7 @8 @9 #5 #6 #7

@1 Audio Input [AUDIO IN]

RCA standard jack accepts an unbalanced –10 dB and

10 kΩline input audio signal supplied from an external

device.

@2 Audio Output [AUDIO OUT]

RCA standard jack supplies an unbalanced –10 dB and

600 Ωline output audio signal to an external device.

@3 Camera Switching Output [CAMERA SW OUT]

This jack is for connecting an external device such as a

video multiplexer receiving multiple camera inputs. The

switching signal supplied makes the connected device

switch from one camera to the other. Use this terminal

only when the recording field rate is lower than 10 fps.

@4 Video Input [VIDEO IN]

This BNC accepts a video signal supplied from a cam-

era or video multiplexer. A 75 Ωtermination is made

unless the video output terminal is connected.

@5 Video Output Connector [VIDEO OUT]

This BNC supplies a video signal looped through the

video input terminal. Connect with a video monitor to

check the input picture, or the next WJ-HD100 in a

SERIES connection.

@6 Monitor Output [MONITOR OUT (PLAY)]

This BNC supplies playback pictures stored on the

hard disk, or setup windows. Connect with a video

monitor.

@7 RS-232C Port [RS-232C]

Through this 9-pin D-Sub connector the digital disk

recorder communicates with the personal computer.

Use a reverse type cable for connection with the per-

sonal computer. Protocol and commands are described

in APPENDIX.

@8 Data Port [DATA]

Connect with equipment in the PS•Data chain or a sys-

tem controller.

@9 Mode Switch [MODE]

Use this switch for setting unit addresses and initializing

all disk contents and setup data.

Terminal Board

#00 Remote In Terminal

These are connected with switches for external control

of major operations on the front panel such as JOG-

CLICK, JOG-LEFT, JOG-RIGHT, ALARM SEARCH,

STEP, REW/FF, STOP/SETUP, PLAY and REC.

#11 Time Adjust Terminal

IN and OUT terminals for synchronizing the internal

clock with connected external devices.

#22 Status Out Terminal

These terminals supply the following status information:

PLAY OUT, REC OUT, AUTO OFF OUT, DISK END

OUT.

AUTO OFF OUT: AUTO OFF OUT signal turns active

(active when low), and playback or recording stops

when a temperature error is detected inside the unit.

Turn the power off and wait for a while until you turn it

on again to reset the error.

#33 Series Record Terminal

Connect these terminals when using multiple units in

series or loop connection.

#44 Alarm Terminal

These terminals supply and receive the following alarm

related information: ALARM RECALL, ALARM OUT,

ALARM RECOVER OUT, ALARM RESET IN, ALARM IN.

#55 Cooling Fan

Do not block the air flow of this cooling fan through the

openings on both sides of the top cover to prevent the

appliance from overheating.

#66 Power Switch [POWER ON OFF]

Turns the power on and off. The OPERATE indicator on

the front panel lights while the power switch is turned

on.

#77 Signal Ground [SIGNAL GND]

Connect with the terminals of other devices as neces-

sary to avoid grounding loop and noise.

#88 Power Cord

INSTALLATION

■Mounting in the Rack

1. Remove the four rubber feet by removing the four

screws on the bottom of the unit.

2. Place the rack mounting brackets on both sides of the

unit and tighten with the six supplied screws (M3 x10).

3. Install the unit with the rack mounting brackets in the

rack by using four screws (not included).

Remove 4 rubber feet.

Six screws (Supplied)

Fix the rack mounting brackets.

Rack

●Warning

This installation should be made by qualified service personnel or system installers.

●Caution Notes Regarding Installation

Places to avoid

• Direct exposure to sunlight or near a source of heat such as a radiator.

• Very dirty and dusty places. Places subject to strong vibrations.

• Near a transformer, dimmer, video player, radio or monitor. These may cause humming noise, etc.

Caution notes regarding mounting

• Do not block the ventilation openings or slots in the cover to prevent the appliance from overheating.

• Always keep the temperature in the rack within +45°C (113°F).

• Secure the rear of the appliance to the rack with additional mounting brackets (procured locally), if the rack is subject to

vibration.

CONNECTION

■Basic Connection

To select the recording mode from an external device connected to the EXT REC mode switch, the JOG/EXT REC parameter in

the REC SETUP menu must be set to EXT REC.

SIGNAL GND

ALARM

SERIES

RECORD

TIME

ADJUST

REMOTE

MODEDATARS-232CVIDEO

OUT

AUDIO MONITOR OUT

(PLAY)

CAMERA

SW OUT

JOG-CLICK

(EXT REC)

JOG-LEFT

JOG-RIGHT

ALARM SEARCH

STEP

REW/FF

STOP/SETUP

PLAY

REC

OUT

PLAY OUT

REC OUT

AUTO OFF OUT

DISK END OUT

OUT

RECALL

OUT

RECOVER OUT

RESET IN

POWER

OFF

Jog Click (EXT REC)

EXT REC Mode Switch

To Speaker

Monitor Out

Video Monitor

Digital Disk Recorder WJ-HD100

Camera

Microphone

Sensor

Alarm In

Video

Audio In

OFF

POWER

Video Input

Andere Handbücher für WJHD100 - DIGITAL DISC RECORDE

Inhaltsverzeichnis

Andere Panasonic Aufnahmegeräte Handbücher

Panasonic

Panasonic PN28080i-ID Bedienungsanleitung

Panasonic

Panasonic AJ-HPM100P Bedienungsanleitung

Panasonic

Panasonic AG-YA500G Bedienungsanleitung

Panasonic

Panasonic WJHD100 - DIGITAL DISC RECORDE Bedienungsanleitung

Panasonic

Panasonic MII AU-W35R Bedienungsanleitung

Panasonic

Panasonic DMR-BCT855 Bedienungsanleitung

Panasonic

Panasonic SZ-CB8 Bedienungsanleitung

Panasonic

Panasonic RR-XS410 Bedienungsanleitung

Panasonic

Panasonic NV-HD90B Bedienungsanleitung

Panasonic

Panasonic AK-MSU935AP Bedienungsanleitung

Panasonic

Panasonic NV-F615EG Bedienungsanleitung

Panasonic

Panasonic WJ-NV300K Bedienungsanleitung

Panasonic

Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Bedienungsanleitung

Panasonic

Panasonic AV-HLC100E Bedienungsanleitung

Panasonic

Panasonic WJHD220 - DIGITAL DISK RECORDER Bedienungsanleitung

Panasonic

Panasonic WJHD309A - DIGITAL DISK RECORDER Einrichtungshandbuch

Panasonic

Panasonic WJ-HD716 Bedienungsanleitung

Panasonic

Panasonic WJ-NV300K Bedienungsanleitung

Panasonic

Panasonic SH-EH60X Bedienungsanleitung

Panasonic

Panasonic WJHD100 - DIGITAL DISC RECORDE Bedienungsanleitung

Panasonic

Panasonic NV-HD610EG Bedienungsanleitung

Panasonic

Panasonic WJHD200 - Digital Disk Recorder Bedienungsanleitung

Panasonic

Panasonic RR-XS600 Bedienungsanleitung

Panasonic

Panasonic SJ-MR230DGH Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch