Panasonic CZ-RTC2 Bedienungsanleitung

Steps for programming CZ-RTC2Remote Controller

These are the locations of the keys used in this procedure.

Cancel

Key

Set Key

Wrench

Key

Delete

Key

Program

Key Up or Down

Timer keys

Up or Down

Day Keys

Steps for programming CZ-RTC2Remote Controller

Note: There can be up to 6 timed functions entered per day. Functions

must be entered in the order they occur 1-6.

1. Setting day of the week and current time of day: Push and hold the

“SET” KEY and the hours will start blinking. While hours or

minutes are blinking, you can also now set the day of the week. Press

the “UP” or “DOWN” DAY KEY until desired day is highlighted.

Set the correct hour of the day using the “UP” or “DOWN”

ARROW KEY followed by the “SET” KEY. The minutes will now

start blinking. Set the correct minutes using the TIMER “UP” or

“DOWN” ARROW KEY followed by the “SET” KEY.

The time Note: on the remote is set in “military time”, this range

will be from 0:00 a.m. (representing midnight) - 23:59 hours p.m.

2. Setting a timed function: Press the “PROGRAM” KEY “CH 1”

will then appear in LCD display. Set the day of the week you want to

schedule an On/Off timed function, by pressing the “UP” or

“DOWN” DAY KEY, until the arrow emblem appears above the day

to be programmed. .

There can be up to 6 timed functions per day. Press the

“UP” or “DOWN” TIMER KEY and set the function from

1 to 6. Example: If only one timed function is needed for a

particular day you would select timer No. 1 then you would

see the following display. For this

example we are showing timer No. 2. Next press the “SET”

KEY then will appear on the LCD

display.

“P1” is for setting the hour the unit will be turned on. Press

the “UP” or “DOWN” TIMER KEY and set the hour.

Once desired hour is shown then press the “SET” KEY and

will appear on the LCD display.

“P2” is for setting the desired minutes. Using the “UP” or

“DOWN “TIMER KEY, set the desired minutes, then

press the “SET” key.

Now “P3” will be displayed and is for setting on and off

times and the desired temperature set-point.

.

Using the UP KEY ONLY of the “UP” or “DOWN”

ARROW KEYS will toggle between on or off and the

temperature set-point.

This icon represents the “OFF” position.

This icon represents the “ON” position.

By default the “ON” icon will be flashing.

Press the “UP” arrow once and the “OFF” icon will appear.

Press the “UP” arrow again and the “ON” icon will appear

and you can now set the temperature set-point with the

“UP” or ”DOWN DAY KEY.

Press the “UP” arrow again and you can set the temperature

set-point only with the “UP” or “DOWN ARROW KEY.

Press the “SET” KEY to complete.

Press the “CANCEL” KEY to exit the programming.

Note: Each day of the week that has a set timed on or off function will

be represented by a black line under its particular day of the week.

Example:

3. Copying program from one day to the next: First press the

“PROGRAM” KEY. Make sure the desired day of the week to

be copied is highlighted by using the “UP” or “DOWN” DAY

ARROWS.Now press the

“PROGRAM” KEY one more time and the following will be

displayed. Press the “SET” KEY. Now use

the “UP” or “DOWN” DAY KEY to select the day you wish to

copy to. Press the “SET” KEY. Press the “CANCEL” KEY to

return to normal operation. Repeat the above steps to copy to each

day of the week you wish to copy to.

4. Turning off the timer without deleting the timer program:

To keep the system from following the programmed On/OFF time schedule,

press the “CANCEL” KEY for 3-4 seconds and the following will appear

in the LCD window. To re-enable the programmed time schedule

press the “CANCEL” KEY for 3-4 seconds until the emblem

disappears from the LCD window.

5. Deleting the Program Timer:

Press the “PROGRAM” KEY once.

Press the “UP” or “DOWN” DAY KEYS to select the day you want

to delete.

Press the “UP” or “DOWN TIMER KEYS to select a timer number.

(From 1-6).

Press the “SET” KEY to display the P1 programming mode.

Press the “DELETE” KEY to delete the program.

Press the “CANCEL” KEY to exit.

Andere Handbücher für CZ-RTC2

Inhaltsverzeichnis

Andere Panasonic Fernbedienung Handbücher

Panasonic

Panasonic CZ-RTC2 Stücklistenhandbuch

Panasonic

Panasonic WV-RC700A Bedienungsanleitung

Panasonic

Panasonic CZ-RD52CP Bedienungsanleitung

Panasonic

Panasonic CZ-RTC3 Bedienungsanleitung

Panasonic

Panasonic EUR511110 Bedienungsanleitung

Panasonic

Panasonic CZ-RWSU3 Service-Handbuch

Panasonic

Panasonic CZ-RL511D Installations- und Betriebshandbuch

Panasonic

Panasonic CZ-RWSU2 Bedienungsanleitung

Panasonic

Panasonic PVCC50 - COLOR CORRECTOR Bedienungsanleitung

Panasonic

Panasonic 060-2331 Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6BLW Bedienungsanleitung

Panasonic

Panasonic WV-CU50E Bedienungsanleitung

Panasonic

Panasonic AK-HRP1015G Bedienungsanleitung

Panasonic

Panasonic EUR7603Z10 Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-RSL1 Bedienungsanleitung

Panasonic

Panasonic CZ-RTC2 Bedienungsanleitung

Panasonic

Panasonic CZ-RTC5B Bedienungsanleitung

Panasonic

Panasonic AK-HRP1005G Bedienungsanleitung

Panasonic

Panasonic CZ-RTC4 Bedienungsanleitung

Panasonic

Panasonic AW-RP50E Bedienungsanleitung

Panasonic

Panasonic EUR7603Z20 Bedienungsanleitung

Panasonic

Panasonic WV-CU20E Bedienungsanleitung

Panasonic

Panasonic CZ-RWSK2 Bedienungsanleitung

Panasonic

Panasonic CZ-RD516C Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung