Panasonic CZ-RTC5A Bedienungsanleitung

Installation Instructions

High-spec Wired Remote Controller

Model No. CZ-RTC5A

English

Read through the Installation Instructions before you proceed

with the installation.

In particular, you will need to read under the “Safety

Precautions” on page 3.

Panasonic Corporation

1006 Kadoma, Kadoma City, Osaka, Japan

CV6233312187

Panasonic Corporation

http://www.panasonic.com

Contents

Part Names ....................................... 2

Supplied accessories ...................... 2

Safety Precautions........................... 3

Speciﬁcations................................... 4

Installation Precautions................... 5

Mounting........................................... 7

Exposed type................................ 7

Embedded type ............................ 8

Setting............................................... 9

Language ..................................... 9

Clock ............................................ 9

Controller name............................ 9

Service contact........................... 10

RC. setting mode.........................11

Detailed settings..........................11

Auto address .............................. 12

Set elec. consumption ................ 12

Conﬁrming Information ................. 13

Test Operation ................................ 14

AMP Air Conditioning

www.ampair.co.uk | [email protected]

2 (EN)

Part Names

5) Cursor buttons

Selects an item.

Down

1) LCD screen

2) Return button

Returns to the

previous screen.

6) Menu button

Displays the menu

screen.

7) Operation

indicator

lluminates during

operation.

Blinks during alarm.

8) Start/Stop button

Starts/Stops operation.

3) Enter button

Fixes the selected

content.

4) Energy saving

button

Switches Energy saving/

Normal operation.

RightLeft

Note

Press centre No penNo glove

Supplied accessories

Screw

M3.8 x 16

(2)

Instructions

(1)

Quick

Reference

(1)

Clamper

(1)

*Remote control wiring is not supplied. (ﬁeld supplied item)

AMP Air Conditioning

www.ampair.co.uk | [email protected]

(EN)

Read before installation

Read the Installation Instructions

carefully to install the remote controller

correctly and safely.

Be sure to read the Safety Precautions

in particular before installation.

After the installation is complete,

perform test operation to conﬁrm that

no abnormality is present.

We assume no responsibility for

accidents or damages resulting from

methods other than those described in

the installation instructions or methods

without using speciﬁed parts.

Malfunctions that occurred due to the

unauthorised installation methods are

not covered by the product warranty.

Read the installation instructions

supplied with indoor units as well.

WARNING

This symbol refers to a hazard or unsafe

practice which can result in severe

personal injury or death.

CAUTION

This symbol refers to a hazard or unsafe

practice which can result in personal

injury or product or property damage.

WARNING

• Turn off the circuit breaker

of the units before

installation.

• Ask your dealer or

professionals for installation

and electric work.

• This controller shall be

installed in accordance with

National Wiring Regulations.

•

Connect and ﬁx the speciﬁed

cables for wiring securely.

• Do not allow the connection

to be exposed to the

external force of the cables.

•

Choose an installation location

that sufﬁciently supports the

weight of the remote controller.

CAUTION

Do not use the remote

controller at the following

locations.

• Location where

condensation occurs

• Location where ﬂammable

gases, etc. may leak

• Location where corrosive

gases, etc. may leak

•

Location with lots of water or oil

droplets (including machine oil)

• Location where voltage

ﬂuctuation frequently occurs

• Location where there

is a machine producing

electromagnetic radiation

• Location where droplets of

organic solvents spread

• Location where acidic or

alkaline solutions or special

sprays are frequently used



Do not operate with wet hands.

Do not wash with water.

The English text is the original instructions. Other languages are translation of

the original instructions.

NOTICE

Safety Precautions

AMP Air Conditioning

www.ampair.co.uk | [email protected]

4(EN)

Rotation operation

Equalizes the operation time by stopping the operation in order. This prevents

the operation time from being uneven depending on the refrigerant system.

The rotation operation can be set only when controlling the single (combination

of 1 outdoor unit and 1 indoor unit) 2 refrigerant systems of PACi by one remote

controller.

The backup operation is a support operation performed by a refrigerant system in

standby mode when the room temperature does not reach the set temperature due

to poor performance or occurrence of an alarm.

Remote controller wiring

R1 R2 R1 R2

Refrigerant system 1

Outdoor unit

Indoor unit Indoor unit

For more information, refer to the Operating Instructions in CD (supplied).

Refrigerant system 2

Outdoor unit

Model No. CZ-RTC5A

Dimensions (H) 120 mm x (W) 120 mm x (D) 16 mm

Weight 180 g

Temperature/

Humidity range

0 ˚C to 40 ˚C / 20 % to 80 % (no condensation)

*Indoor use only.

Power Source DC16 V

(supplied with indoor unit)

Clock

Precision

± 30 seconds/month (at normal temperature 25 ˚C)

*Adjust periodically.

Holding time 72 hours (when fully charged)

*Approx. 8 hours are required for full charge.

Number of connectable

indoor units Up to 8 units

Speciﬁcations

AMP Air Conditioning

www.ampair.co.uk | [email protected]

(EN)

Installation Precautions

Installation location

5 mm or more

50 mm or

1 to 1.5 m

Floor

Install at the height of 1 to 1.5 m from

the ﬂoor (Location where average

room temperature can be detected).

Install vertically against the ﬂoor.

When installing more than 1 remote

controller next to each other, keep

distance of 5 mm on the right and left

and 50 mm on top and bottom.

Avoid the following locations for

installation.

• By the window, etc. exposed to

direct sunlight or direct air

• In the shadow or backside of objects

deviated from the room airﬂow.

• Location where condensation

occurs (The remote controller is not

moisture proof or drip proof.)

• Location near heat source

• Uneven surface

Keep distance of 1 m or more from

the TV, radio and PC. (Cause of fuzzy

images or noise)

Remote control wiring

Wiring diagram

Indoor unit

Terminals for RC wiring

RC wiring (ﬁeld supply)

• No polarity

Type of wiring

Use cables of 0.5 to 1.25 mm2.

Total wire length: 500 m or less

(The wire length between indoor units

should be 200 m or less.)

Number of connectable units

Remote controller: Max. 2

Indoor unit: Max. 8

Attention



Use the ﬁeld supplied RC wiring

with at least 1 mm in thickness of

insulation part including the sheath.

Regulations on wire diameters

differ from locally to locally. For

ﬁeld wiring rules, please refer to

your LOCAL ELECTRICAL CODES

before beginning. You must ensure

that installation complies with

relevant rules and regulations.

Be careful not to connect cables

to other terminals of indoor

units (e.g. power source wiring

terminal). Malfunction may occur.

Do not bundle together with the

power source wiring or store in

the same metal tube. Operation

error may occur.

If noise is induced to the unit

power supply, attach a noise ﬁlter.

AMP Air Conditioning

www.ampair.co.uk | [email protected]

6(EN)

*Wiring as shown below is prohibited.

R1 R2 R1 R2 12 R1 R2

12 12

Indoor unit Indoor unit Indoor unit

RC wiring

When setting both the main and sub remote controllers

After installation, set one remote controller to [Main] and the other to [Sub] for [Main/

sub] for “Setting” (P.11).

When using the remote controllers* in combination, set this unit to [Main].

*CZ-RTC2, CZ-RTC4, CZ-RE2C2, CZ-RELC2

Using 1 indoor unit

12 12

R1 R2

RC wiring

(ﬁeld supply)

• No polarity Terminals for RC wiring

RC (main) RC (sub)

Indoor unit

Using more than 1 indoor unit or heat exchange ventilation unit

R1 R2 R1 R2 R1 R2 R1 R2

RC (main) RC (sub)

RC wiring (ﬁeld supply)

• No polarity

Terminals for

RC wiring

Indoor unit Indoor unit Indoor unit Indoor unit

Note

Remote controllers can be connected to any indoor unit for operation.

AMP Air Conditioning

www.ampair.co.uk | [email protected]

(EN)

1Remove the bottom case. Attention

Mounting the bottom case

Tighten the screws securely until

the screw heads touch the bottom

case.

(Otherwise, loose screw heads may

hit the PCB and cause malfunction

when mounting the top case.)

Do not over-tighten the screws.

(The bottom case may be deformed,

resulting in fall of the unit.)

Connecting the remote control wiring

Arrange the wires as shown in the illustration for in

step 2, avoiding unnecessary wires being stored in the

remote controller case.

(Caught wires may destroy the PCB.)

Avoid wires touching parts on the PCB.

(Caught wires may destroy the PCB.)

2Mount to the wall.

Flat-blade

screwdriver

Insert the

driver and

slightly turn.

Bottom

case

Mounting

Exposed type

Mount the top case.

Align the claws of the top

case and then align the

claws of the bottom case.

Preparation: Make 2 holes for screws using a driver.

Mount the bottom case to the wall.

Cut here with a

nipper and remove

the burr with a ﬁle.

Claw (2 places)

Screw

(Supplied)

Hole for screw

Claw (2 places)

Wall to which

the remote

controller is

ﬁxed

Connect the remote control

wiring

Arrange the wires along the groove

of the case.

Clamper

(supplied)

Pass through

the hole

Remote controller terminal board

Remove the coating. Approx. 6 mm

Remove the sheath. Approx. 160 mm

Make sure the wiring connection

is in the correct direction.

Bottom case

(Back side)

Top case

(Back side)

AMP Air Conditioning

www.ampair.co.uk | [email protected]

8(EN)

(mm)

2323

83.5

5-5x9

120

Embedded type

Preparation: Make 2 holes for screws using a driver.

2Connect the remote control

wiring

Mount the top case.

Align the claws of the

top case and then

align the claws of the

bottom case.

Avoid the

wire being

caught.

Claw (2 places)

Screw

(Supplied)

Hole for screw

Claw (2 places)

Mount the bottom case to the wall.

Pass the wire through the hole in the centre

of the bottom case.

Remote controller terminal board

Remove the coating. Approx. 6 mm

Make sure the wiring connection is

in the correct direction.

Bottom case

(Back side)

Top case

(Back side)

Dimensions

AMP Air Conditioning

www.ampair.co.uk | [email protected]

(EN)

Setting Language Clock Controller name

1Press .

2Select [Initial settings].

▲▼→

Default setting : English

3Select the item to set.

▲▼→

Language

4Set.

▲▼◄►→

Clock

4Set.

▲▼→►→

(Repeat)

Controller name

4Set.

▲▼→◄►→

(Repeat the same procedure for all

characters.)

• Up to 16 characters

(Space is included in the number of

characters.)

To change the character type

Select the character type with

▲▼◄►and press .

To enter space

Select [Space] with ▲▼◄►and

press .

To delete 1 character

Select [BS] with ▲▼◄►and

press .

5Select [Conf].

▲▼◄►→

Controller name

AMP Air Conditioning

www.ampair.co.uk | [email protected]

10 (EN)

Setting Service contact

1Press and hold the 3 buttons for

4 seconds or more simultaneously.

, , ►

2Select the item to set.

▲▼→

Service contact

3Select. (Name)

▲▼→Name

Contact number

4▲▼→◄►→

(Repeat the same procedure for all

characters.)

• Up to 16 characters

(Space is included in the number of

characters.)

To change the character type

Select the character type with

▲▼◄►and press .

To enter space

Select [Space] with ▲▼◄►and

press .

To delete 1 character

Select [BS] with ▲▼◄►and

press .

5Select [Conf].

▲▼◄►→

• Up to 16 characters

(Space is included in the number of

characters.)

6Select on the screen for step 3.

(Contact number)

▲▼→

7▲▼◄►→

(Repeat the same procedure for all

characters.)

8Select [Conf].

▲▼◄►→

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Andere Handbücher für CZ-RTC5A

Inhaltsverzeichnis

Andere Panasonic Fernbedienung Handbücher

Panasonic

Panasonic AK-HRP1015G Bedienungsanleitung

Panasonic

Panasonic AWCB400N - REMOTE OPERATION PANEL Bedienungsanleitung

Panasonic

Panasonic TX LXD6 Series Bedienungsanleitung

Panasonic

Panasonic WV-CB550 Bedienungsanleitung

Panasonic

Panasonic EUR511511 guide Bedienungsanleitung

Panasonic

Panasonic EUR511170B Bedienungsanleitung

Panasonic

Panasonic OneRemote RMB4 Bedienungsanleitung

Panasonic

Panasonic EUR643809 Betriebsanleitung

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Panasonic

Panasonic CZ-RWSD2U Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6 Bedienungsanleitung

Panasonic

Panasonic CZ-RWSU2 Bedienungsanleitung

Panasonic

Panasonic EUR511502 Bedienungsanleitung

Panasonic

Panasonic WV-CU20E Bedienungsanleitung

Panasonic

Panasonic Palmcorder PV-DRC9 Bedienungsanleitung

Panasonic

Panasonic CZ-RWS3 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-ES35V Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6W Bedienungsanleitung

Panasonic

Panasonic AK-HRP200G Bedienungsanleitung

Panasonic

Panasonic AW-RM50AG Bedienungsanleitung

Panasonic

Panasonic AK-HRP1000G Bedienungsanleitung

Panasonic

Panasonic CZ-01ESM11P Bedienungsanleitung

Panasonic

Panasonic CZ-RTC4A Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6BL Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung