Panasonic GP-KR222E Bedienungsanleitung
Industrial Colour CCD Camera
GP-KR222E
(Lens : option)
Before attempting to connect or operate this product,
please read these instructions completely.
FRANÇAIS DEUTSCH ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK), NO USER SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of
your purchase to aid identification in the event of theft.
Model No.
Serial No.
The exclamation point within an equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instruc-
tions in the literature accom-panying
the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ENGLISH VERSION
The lighthing flash with arrowhead sym-
bol, within an equilateral triangle, is
interned to alert the user to the pres-
ence of uninsulated "dangerous volt-
age" within the product's enclosure that
may be of sufficient magnitude to con-
stitute a risk of electric shock to per-
sons.
Dit modelis onderworpen aan de EEG-richtlijn (ter
voor-koming van radio-interferentie) 87/308/EGG.
Denne model opfylder EF direktiv 87/308/EF (for for-
ebyggelse af radiointerferens).
Este modelo cumple con la norma EC (para interfer-
encias de radio 87/308/EEC).
La Società PANASONIC ITALIA S.p.A., importatrice di
questo prodotto, dichiara che questo apprarecchio è
conforme alle disposizioni della direttiva C.E.E./
87/308 (D.M. 13 aprile 1989).
This model conforms of the EC directive (for radio
interference) 87/308/EEC.
This apparatus was produced to BS 800:1987.
CONTENTS
PREFACE ........................................................................................................................................................................ 2
FEATURES ...................................................................................................................................................................... 2
PRECAUTIONS ............................................................................................................................................................... 3
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ......................................................................................... 4
CONNECTION ................................................................................................................................................................ 8
MOUNTING THE LENS ................................................................................................................................................. 10
FLANGE-BACK FOCAL LENGTH ADJUSTMENT ......................................................................................................... 10
PREVENTION OF BLOOMING AND SMEAR ................................................................................................................ 11
SPECIFICATIONS ......................................................................................................................................................... 12
-1-
The model numbers listed in this Operating Instructions have no suffixed attached to it.
ENGLISH
-2-
PREFACE
Panasonic`s Colour Digital Camera GP-KR222 intro-
duce a new level of high picture quality and resolution
through the utilization of a 1/2-inch interline CCD image
sensor having 752 horizontal pixels (picture elements),
and through the use of digital signal processing LSI`s.
High sensitivity is ensured by the use of on-chip micro
lenses on each pixel. In addition, the use of aspherical
high speed lenses further improves sensitivity. High
performance-to-cost ratio is achieved through the
extensive use of newly developed digital LSI`s.
FEATURES
1. Automatic Light Control (ALC)/ Electronic Light
Control (ELC) are built in.
2. Back light Compensation is available.
3. Auto/Manual White Balance Control Function are
provided.
4. Selectable of Soft/Sharp Aperture
5. Signal-to-noise ratio of 50 dB
6. Minimum illumination of 3 lux with F1.4 lenses
7. Minimum illumination of 0.9 lux by using Panasonic
aspherical high speed (F0.75) lenses.
8. 480 lines of horizontal resolution
9. High quality picture :
(a) 2H type vertical enhancer for greater picture
sharpness
(b) Chroma averaging circuit for better colour sig-
nal to noise ratio
(c) Minimum of aliasing on fine objects
(d) Expanded dynamic range by use of knee cir-
cuit signal to noise ratio.
(e) Highlight aperture correction for greater pic-
ture detail of bright object
10. Ability to shoot indoor scenes with fixed iris lens by
use of Electronic Light Control(ELC) function.
11. Backlight compensation for use against unusual
lighting conditions.
PRECAUTIONS
1. Do not attempt to disassemble the camera
To prevent electric shock, do not remove screws
or cover. There are no user-service parts inside.
Refer servicing to qualified service personnel.
2. Handle the camera with care
Do not abuse the camera. Avoid striking or shak-
ing it. The camera could be damaged by improper
handing or storage.
3. Do not expose the camera to rain or moisture,
avoid operation in wet areas.
Do take immediate action if the camera should
become wet. Turn the power off and request ser-
vicing to qualified service personnel. Moisture can
damage the camera and also create the danger of
electric shock.
4. Never aim the camera at the sun
Whether the camera is in use or not, never aim it at
the sun or an extremely bright object laser beam
etc., as this could cause a damage of CCD image
sensor or smear on the picture.
5. Do not operate the camera beyond its
temperature, humidity or power source ratings.
(a) Designed for indoor use
(b) Ambient temperature must not range beyond
−10° C +50° C (14° F + 122° F).
(c) Avoid using the camera when humidity is
above 90%.
(d) The input power source is 12 V DC, 300mA.
-3-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
-4-
L
VIDEO OUT
OFF
ELC
SOFT
OFF
OFF
AGC ON
ALC
SHARP
BLC ON
ATW ON
H
DC 12V IN
GP-
KR222
VIDEO
LEVEL
POWER
S VIDEO OUT
R B
(AWC)
!1 !2 !3 !4
!0
q
we rt
u
i
o
y
1. Camera Mounting Screw Hole
This threaded hole (1/4” - 20) is used to mount the
camera onto a mounting bracket or tripod.
2. Flange-back Adjusting Ring
This is used to adjust the back focal length or pic-
ture focus by rotating this ring to clockwise for C-
mount lens or counterclockwise for special C-
mount (CS mount) lens.
CAUTIONS :
1. Always set this ring to fully clockwise before
mounting the lens to prevent damage of inner
glass or CCD image sensor.
2. Do not turn this ring too much to counterclock-
wise when the C-mount lens is mounted as
this could damage the inner glass or CCD
image sensor.
3. Lens (Option)
4. 12 V In Terminal (DC 12V IN)
This terminal accepts 12 V DC power source
(10.8V - 16V)
-5-
5. AGC ON/OFF Switch (AGC ON/OFF)
This switch is used to select the gain of the video
amplifier as follows :
ON: When the lens iris is fully opened at low light
shooting, a clear picture is obtained by auto-
matic increase of the gain.
OFF: A natural and low-noise picture is obtained
under a low light condition.
6. Automatic Light Control/Electronic Light
Control Selection Switch (ELC / ALC)
This switch is used to select the lens as follows.
ALC: Choose this position when using an auto iris
lens.
ELC: Choose this position when using a fixed or
manual iris lens.
7. Detail Level Selection Switch (SOFT/SHARP)
The detail/aperture level can be selected by this
switch. Set this switch to the desired position while
observing the picture on the monitor.
Note: The aperture is cut off at SOFT position.
-6-
8. Back Light Compensation On/Off Switch (BLC
ON/OFF)
When back light affects the picture, set this switch
to the ON position for a clear picture.
9. Automatic Tracing White Balance Control
On/Off Switch (ATW, ON/OFF(AWC))
The white balance setting can be selected as ;
ON: The white balance is automatically and con-
tinuously set by detecting the characteristic /
colour temperature of light source through the
lens and controlling the gain of red and blue
signal even if the characteristic / colour tem-
perature varies.
Note: The white balance setting is effected by the
setting level of the ATW Control (11). (The
bluish white is obtained when the ATW Control
has been set to the B side.
OFF: The white balance is automatically set and
fixed with the condition switched to the AWC
from ATW. When the characteristic/colour
temperature of light source changes, set this
switch to the ATW ON position then set it back
OFF.
Note: The white balance setting is effected by the
setting level of the ATW Control (11). (The
bluish white is obtained when the ATW Control
has been set to the B side.
10. Power Indicator (POWER)
11. ATW Control (ATW ON, R/B)
This control adjusts the level of red and blue
colour balance even if the ATW ON/OFF Switch (9)
is set to any position. It is preset at the centre posi-
tion which usually provides accurate colour repro-
duction.
12. Video Level Control (VIDEO LEVEL, L/H)
This control adjusts the level of auto iris control
when the ELC/ALC Selection switch (6) is set to
the ALC position, or the level of electric light con-
trol when the selection switch (6) is set to the ELC
position.
Note: This control does not work in the following
conditions
• AGC ON/OFF Switch (5) is set to OFF with the
manual or fixed lens.
• AGC gain reaches the maximum level when
setting the AGC ON/OFF Switch (5) to ON.
13. S-Video Output Connector (S-VIDEO OUT)
The luminance (Y) and chroma (C) signals for
monitor are provided at this connector.
14. Video Output Connector (VIDEO OUT)
A 1.0 Vp-p / 75 ohms composite video signal is
provided at this connector.
-7-
ELC (Electronic Light Control)/BLC (Back Light
Compensation) Description
1. ELC (Electronic Light Control)
In this mode a continuously variable electronic
shutter is employed to automatically control expo-
sure times in the CCD Image Sensor, according to
the incoming light level. When this mode is select-
ed, fixed or manual iris lens can be used instead
of an ALC type lens.
Caution :
1. Under bright conditions such as outdoors, use
an ALC type lens as the ELC control range is
not wide enough under these conditions.
2. Under certain unique lighting conditions, the
following may appear :
• strong smear and/or blooming on high light
objects such as spot lights or windows.
• noticeable flicker in the picture and/or the
colour rendition variations.
• periodic variance of white balance
Should these phenomena occur, use an ALC lens.
2. BLC (Back Light Compensation)
ON OFF
When strong, unwanted background lighting inter-
feres with the clarity of important scene objects,
turn the Back Light Compensation On/Off Switch
(8) to the “ON” position.
Caution :
Setting this switch to the “BLC OFF” position
is recommended in the use with the pan/tilt
head or in the object having the rapid change
illumination since the speed of lens iris
becomes slow in the “BLC ON” position.
CONNECTION
1. A power supply of 12V DC is required.
2. Connect the power cable to the 12V DC Power
Terminal on the rear panel of the camera.
Copper wire #24 #22 #20 #18
size (AWG) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2)
Resistance 0.257 0.165 0.099 0.059
ohms/ft
Resistance 0.078 0.050 0.030 0.018
ohms/m
Resistance of copper wire [at 20°C (68°F)]
12 VDC
(10.5 V - 16 V)
−+
• Calculation method of maximum cable length
between camera and power supply.
10.5V DC ≤VA−(R x 0.42 x L) ≤16V DC
L : Cable length (meter)
R : Resistance of copper wire (ohms/meter)
VA: DC output voltage of power supply unit
VA−12
L standard = (meter)
0.42 x R
VA−16
L minimum = (meter)
0.42 x R
VA−10.5
L maximum = (meter)
0.42 x R
-8-
Inhaltsverzeichnis
Sprachen:
Andere Panasonic Sicherheitskamera Handbücher
Panasonic
Panasonic BB-HCE481 Bedienungsanleitung
Panasonic
Panasonic WV-CS400 Bedienungsanleitung
Panasonic
Panasonic WVCS564 - COLOR CCTV CAMERA Bedienungsanleitung
Panasonic
Panasonic WV-S1531LTN Betriebsanleitung
Panasonic
Panasonic i-pro WV-NP1004 Bedienungsanleitung
Panasonic
Panasonic AWE300S - SEPERATE CAMERA Bedienungsanleitung
Panasonic
Panasonic OneHome BB-HCM311A Bedienungsanleitung
Panasonic
Panasonic WV-X2251L Installationsanleitung
Panasonic
Panasonic WV-SFV311A Bedienungsanleitung
Panasonic
Panasonic Machine Vision GP-MF130 Bedienungsanleitung
Panasonic
Panasonic WV-CP110 Bedienungsanleitung
Panasonic
Panasonic WV-CP500L Bedienungsanleitung
Panasonic
Panasonic KX-HCM280A Bedienungsanleitung
Panasonic
Panasonic BB-HCM403A Bedienungsanleitung
Panasonic
Panasonic GP-US522HB Bedienungsanleitung
Panasonic
Panasonic WV-SF549 Bedienungsanleitung
Panasonic
Panasonic WV-V6430L Bedienungsanleitung
Panasonic
Panasonic WVCP160 - COLOR CCTV CAMERA Bedienungsanleitung
Panasonic
Panasonic WV-SPN611 Bedienungsanleitung
Panasonic
Panasonic BB-HCM371A - Outdoor Wireless Network Camera Bedienungsanleitung
