Panasonic GP-MF130E Bedienungsanleitung
Machine Vision B/W CCD Camera
GP-MF130E
Before attempting to connect or operate this product,
please read these instructions completely.
DEUTSCHFRANÇAIS ENGLISH
ENGLISH VERSION
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to
alert the user to the presence
of uninsulated "dangerous volt-
age" within the product's enclo-
sure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in
the literature accompanying the
appliance.
Remove dust on the faceplate of filter glass
before mounting the lens on the camera.
The serial number of this product may be found on
the top of the unit.
You should note the serial number of this unit in the
space provided and retain this book as a permanent
record of your purchase to aid identification in the
event of theft.
Model No.
Serial No.
CONTENTS
PREFACE ....................................................... 2
FEATURES ..................................................... 2
PRECAUTIONS .............................................. 3
MAJOR OPERATING CONTROLS AND
THEIR FUNCTIONS ........................................ 5
PREPARATIONS ............................................. 8
SYSTEM CONNECTIONS ............................... 9
EXTERNAL SYNCHRONIZATION .................. 10
PREVENTION OF BLOOMING AND SMEAR .. 10
SPECIFICATIONS ........................................... 11
OPTIONAL ACCESSORIES ............................. 12
- 1 -
We declare under our sole responsibility that the product to
which this declaration relates is in conformity with the stan-
dards or other normative documents following the provi-
sions of Directive EEC/89/336.
Nosotros declaramos bajo nuestra única responsabilidad
que el producto a que hace referencia esta declaración està
conforme con las normas u otros documentos normativos
siguiendo las estipulaciones de la directiva CEE/89/336.
Noi dichiariamo sotto nostra esclusiva responsabilità che il
prodotto a cui si riferisce la presente dichiarazione risulta
conforme ai seguenti standard o altri documenti normativi
conformi alle disposizioni della direttiva CEE/89/336.
Wij verklaren als enige aansprakelijke, dat het product
waarop deze verklaring betrekking heeft, voldoet aan de
volgende normen of andere normatiefve dokumenten,
overeenkomstig de bepalingen van Richtlijn 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse med
den følgende standarder eller andre normative dokumenter i
følge bestemmelserne i direktiv 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt till
vilken denna deklaration hänvisar är i överensstämmelse
med standarddokument, eller andra normativa dokument
som framstölls i Direktiv 89/336/EEC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota
tämä ilmoitus koskee, noudattaa seuraavia standardeja tai
muita ohjeellisia asiakirjoja, jotka noudattavat direktiivin
89/336/EEC. säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne
erklæringen gjelder for, er i overensstemmelse med
følgende normer eller andre normgivende dokumenter som
fælger bestemmelsene i direktiv 89/336/EEC.
ENGLISH
- 2 -
PREFACE
The Panasonic GP-MF130 Machine Vision B/W
CCD Camera has a 1/3” Interline Transfer CCD
image sensor which features 440 000 pixels, a
horizontal resolution of 560 lines, and minimum
smear.
FEATURES
1. Newly developed multi-function solid state
image sensor 1/3” Inter Line Transfer type
CCD image sensor with 752 (H) x 582 (V)
pixels.
2. Selectable scanning system :
1-line interlace and 2-line interlace are avail-
able for the highest quality possible within
video processing.
3. External synchronization :
External HD/VD input enables system setup
with external video processors, etc.
4. High speed shutters up to 1/96 000 second
enables to capture the moving objects.
- 3 -
4. Do not use the strong or abrasive
detergents when cleaning the camera
body.
Use a dry cloth to clean the camera when
dirty.
In case the dirt is hard to remove, use a
mild detergent and wipe gently.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abra-
sive detergents. Use lens tissue or a cotton
tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects.
Whether the camera is in use or not, never
aim at the sun or other extremely bright
objects. Otherwise, blooming or smear may
be caused.
PRECAUTIONS
1. Do not attempt to dissemble the camera.
To prevent electric shock, do not remove
screws or covers.
There are no serviceable parts inside. Ask a
qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking,
shaking, etc. The camera could be dam-
aged by improper handling or shortage.
3. Do not expose the camera to rain or
moisture, or try to operate it in wet areas.
This camera is designed for indoor use.
Turn the power off immediately and ask a
qualified service person for servicing.
Moisture can damage the camera and also
create the danger of electric shock.
- 4 -
7. Do not drop anything inside the camera.
Dropping metal for example inside the cam-
era could permanently damage the unit. If
anything is dropped inside the camera, turn
the power off immediately and ask a quali-
fied service person for servicing.
8. Do not operate the camera beyond the
specified temperature, humidity or power
source ratings.
Use the camera under conditions where
temperature is between −10°C - +50°C
(14°F - 122°F), and humidity is below 90 %.
The input power source is DC 12 V, 170 mA.
- 5 -
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
12P
VIDEO
130
ON
OFF
16
q
!2
!3
!4
ON
OFF
16
y
u
i
o
!0
!1
e
r
w
t
1. 1/3” Manual Iris Lens (Sold Separately)
2. Camera Connector (12-pin)
This is connected with the optional Camera
Cable GP-CA34 , GP-CA33, GP-CA59 or
GP-CA60.
Pin No. Description
1 Ground
2 +12V IN
3 Ground for Video Out
4 Video Out
5 Ground for HD
6 HD IN
7 VD IN
8 Ground
9 No connection
10 No connection
11 No connection
12 Ground for VD
3. Pedestal Control
This controls the pedestal level from 0 mV to
100 mV.
- 6 -
qo
w!0i
e!1 u!2
rty
CAUTION: CONNECT
THIS TO A DC 12V
CLASS 2 POWER
SUPPLY ONLY.
4. Manual Gain Control
This controls the gain level from 0 to 6 dB.
5. Video Output Connector
This connector is used to connect with the
VIDEO IN connector of the monitor.
6. Switch 1 No.1 (1/ON) 1ON
This switch selects the Field or Frame
Accumulation.
ON : Field Accumulation
OFF: Frame Accumulation
7. Switch 1 No.2 (2/ON) 2ON
8. Switch 1 No.3 (3/ON) 3ON
9. Switch 1 No.4 (4/ON) 4ON
10. Switch 1 No.5 (5/ON) 5ON
These switches (Switch 1 No. 2, 3, 4, and 5)
are used to set the shutter speed.
Switch 1
- 7 -
The shutter speed can be set as below: 11. Switch 1 No.6 (6/ON) 6ON
This switch is not available for this model.
12. Switch 2 No.1 (1/ON) 1ON
Switch 2 No.2 (2/ON) 2ON
Switch 2 No.3 (3/ON) 3ON
Switch 2 No.4 (4/ON) 4ON
These switches are not available for this
model. Keep these switches at OFF posi-
tion.
13. Switch 2 No.5 (5/ON) 5ON
This switch turns on or off the termination for
HD signal with 75 Ω.
14. Switch 2 No.6 (6/ON) 6ON
This switch turns on or off the termination for
VD signal with 75 Ω.
Not Specified
Shutter Speed
No. 2 No. 3 No. 4 No. 5
OFF OFF OFF OFF
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF
OFF OFF ON OFF
ON OFF ON OFF
OFF ON ON OFF
ON ON ON OFF
OFF OFF OFF ON
ON OFF OFF ON
OFF ON OFF ON
Other Combinations
Normal
1/120
1/500
1/1 000
1/2 000
1/4 000
1/8 000
1/16 000
1/32 000
1/64 000
1/96 000
And to control the pedestal level or gain
level, remove the cover fixing screw on the
rear panel as shown below.
- 8 -
1. Power Supply for Camera
Prepare a regulated DC power supply
which can supply DC 12 V ±10 % 170 mA
or more current and rated CLASS 2.
2. Lenses
Be sure to use the optional manual iris lens
having the following items.
Focus : Adjustable
Lens Weight : Less than 300 g(0.66 lbs.)
Note: If the lens is heavier than 300 g(0.66
lbs.), both the lens and the camera
should be secured by using the sup-
porter.
Mount : C-mount
The protrusion
at the rear of
the lens should
be as shown in
the illustration.
Less than 8 mm (Less than 5/6")
3. Switch Covers Removal
Caution: The following preparation should
be made by qualified service person-
nel or system installers.
For setting the Switch 1 No.1 to 6 and 2 No.
1 to 6, remove the switch cover fixing screw
on the side panel as shown below.
PREPARATIONS
Remove this screw
12P
VIDEO
Remove
this screw
Inhaltsverzeichnis
Andere Panasonic Sicherheitskamera Handbücher
Panasonic
Panasonic K-EF134L03E Bedienungsanleitung
Panasonic
Panasonic KX-HNC600E Bedienungsanleitung
Panasonic
Panasonic WV-SF135 Bedienungsanleitung
Panasonic
Panasonic WJND400 - NETWORK DISK RECORDER Service-Handbuch
Panasonic
Panasonic WVBP110 - MONITOR Bedienungsanleitung
Panasonic
Panasonic WV-S15700-V2L Series Bedienungsanleitung
Panasonic
Panasonic BB-HCM527 Betriebsanleitung
Panasonic
Panasonic WV-NP502 Bedienungsanleitung
Panasonic
Panasonic WV-NW502S Bedienungsanleitung
Panasonic
Panasonic Super Dynamic III WV-CS950 Bedienungsanleitung
Panasonic
Panasonic BL-C230 Series Bedienungsanleitung
Panasonic
Panasonic WV-TW310L Bedienungsanleitung
Panasonic
Panasonic WV-NP240 series Bedienungsanleitung
Panasonic
Panasonic BL-C1 Bedienungsanleitung
Panasonic
Panasonic WVBP130 - B/W CCTV CAMERA Bedienungsanleitung
Panasonic
Panasonic WV-SW175 Bedienungsanleitung
Panasonic
Panasonic VL-WD812EX Bedienungsanleitung
Panasonic
Panasonic WV-SPN311 Bedienungsanleitung
Panasonic
Panasonic BB-HCM527 Bedienungsanleitung
Panasonic
Panasonic WV-CP160E Bedienungsanleitung
