Panasonic WVCF254 - COLOR CAMERA Bedienungsanleitung



Color CCTV Camera

WV-CF254

Before attempting to connect or operate this product, please read these instructions completely

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated "dangerous

voltage" within the product's enclo-

sure that may be of sufficient magni-

tude to constitute a risk of electric

shock to persons.

The exclamation point within an equi-

lateral triangle is intended to alert the

user to the presence of important

operating and maintenance (servic-

ing) instructions in the literature

accompanying the appliance.

The serial number of this product may be found on the

top of the unit.

You should note the serial number of this unit in the

space provided and retain this book as a permanent

record of your purchase to aid identification in the event

of theft.

Model No.

Serial No.

Warning:

This equipment generates and uses radio frequency

energy and if not installed and used properly, i.e., in

strict accordance with the instruction manual, may

cause harmful interference to radio communications.

It has been tested and found to comply with the limits

for a Class A computing device pursuant to Subpart J

of Part 15 of FCC Rules, which are designed to pro-

vide reasonable protection against such interference

when operated in a commercial environment.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER SER-

VICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PER-

SONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

For U.S.A

-1-

CONTENTS

PREFACE ............................................................................................................................................................ 2

FEATURES .......................................................................................................................................................... 2

PRECAUTIONS ................................................................................................................................................... 2

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ............................................................................. 3

CONNECTIONS .................................................................................................................................................. 5

INSTALLATION ..................................................................................................................................................... 6

ADJUSTMENT ....................................................................................................................................................... 9

SYSTEM CONNECTION ...................................................................................................................................... 11

SETUP ................................................................................................................................................................. 12

1. CAMERA SETUP MENU ............................................................................................................................... 12

2. SETUP OPERATION ..................................................................................................................................... 12

SETTING PROCEDURES .................................................................................................................................... 15

PREVENTION OF BLOOMING AND SMEAR ...................................................................................................... 20

SPECIFICATIONS ................................................................................................................................................ 21

STANDARD ACCESSORIES ............................................................................................................................... 21

-2-

1. The following functions are built in.

(1) Auto Light Control (ALC)/Electronic Light

Control (ELC)

(2) The SUPER-D function eliminates interfer-

ence by strong background lighting which

makes the camera picture dark, such as a

spotlight.

Dynamic range of 40 dB.

(3) Auto/Manual White Balance Function

(4) Electronic Shutter Function

2. Signal-to-noise ratio of 50 dB

3. Minimum illumination of 5 lux (0.5 footcandle).

4. 480 lines of horizontal resolution

5. High quality picture:

(a) 2H type vertical enhancer for greater pic-

ture sharpness

(b) Chroma averaging circuit for better color

signal to noise ratio

(d) Expanded dynamic range by use of knee

circuit

(e) Highlight aperture correction for greater

picture detail of bright object

PREFACE

Panasonic's WV-CF254 color digital camera intro-

duces a new level of high picture quality and high

resolution through the use of a 1/3-inch interline

transfer CCD image sensor having 771 horizontal

pixels (picture elements), and digital signal pro-

cessing LSIs. This model offers cutting-edge tech-

nology for advanced video surveillance.

FEATURES

1. Do not attempt to disassemble the camera.

To prevent electric shock, do not remove

screws or covers.

There are no user serviceable parts inside. Ask

a qualified service person for servicing.

2. Handle the camera with care.

Do not abuse the camera. Avoid striking,

shaking, etc. The camera could be damaged

by improper handling or storage.

3. Do not expose the camera to rain or

moisture, or try to operate it in wet areas.

Turn the power off immediately and ask a qual-

ified service person for servicing. Moisture can

damage the camera and also create the dan-

ger of electric shock.

4. Do not use strong or abrasive detergents

when cleaning the camera body.

Use a dry cloth to clean the camera when

dirty.

In case the dirt is hard to remove, use a mild

detergent and wipe gently.

5. Never face the camera towards the sun.

Do not aim the camera at bright objects.

Whether the camera is in use or not, never aim

it at the sun or other extremely bright objects.

Otherwise, blooming or smear may be caused.

6. Do not operate the camera beyond the

specified temperature, humidity or power

source ratings.

Use the camera under conditions where tem-

perature is between −10°C - +50°C (14°F -

122°F), and humidity is below 90%. The input

power source is AC 24 V.

Caution:

To prevent fire or electric shock hazard, a

UL listed wire (VW-1, style 1007) should be

used for AC 24 V Input Terminals.

PRECAUTIONS

-3-

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

OPEN

LOCK

OPENLOCK

LEFT RIGHT

SET

DOWN

-4-

o(S) (Set Button)

This button activates a selected item in the

CAM SETUP menu.

!0 Lens Holders

These holders bring the picture in an upright

position on the monitor screen.

!1 Dome Cover

This protects the camera head.

!2 Video Output Cable with BNC Connector

This connector is used to connect with the

VIDEO IN connector of the monitor.

!3 Power Cable with MOLEX Connector

This cable is for connecting the 24 V AC power

supply cable.

!4 Camera Fixing Bracket

This bracket holds the camera on the ceiling or

the wall.

Cautions:

1. Connect to 24 V AC (19.5 V-28 V) class 2

power supply only. Make sure to connect

the grounding lead to the GND terminal

when the power is supplied from a 24 V AC

power source.

2. To prevent fire or electric shock hazard, use

a UL listed wire VW-1, style 1007 cable for

the Input Terminal.

qPanning Table

This adjusts the panning angle of the camera.

wCamera Head

This adjusts the tilting angle of the camera.

eFocus Ring

This adjusts the focus.

rZoom Ring

This adjusts the angle of view.

t(D) (Down Button)

This button moves the cursor downward. It

also selects items in the CAM SETUP menu.

y(R) (Right Button)

This button moves the cursor to the right. It

also selects the mode and adjusts some lev-

els.

u(L) (Left Button)

This button moves the cursor to the left. It also

selects the mode and adjusts some levels.

i(U) (Up Button)

This button moves the cursor upward. It also

selects items in the CAM SETUP menu.

-5-

CONNECTION

Precaution:

The following connections should be made by qualified service personnel or system installers in accor-

dance with NEC 725-51.

OPEN

LOCK

To Video IN

(CAMERA IN)

Video Output Cable

24V AC

BNC Plug

BNC

Plug

Coaxial Cable

How to assemble the cable with the accessory

connector

Strip back the cable jacket approx. 3 mm (1/8 inch)

and separate the individual conductors.

Recommended wire gauge sizes for 24 V AC line.

#24

(0.22mm2)

Copper wire size

(AWG)

Length

of Cable

(Approx.)

(m)

(ft)

#22

(0.33mm2)#20

(0.52mm2)#18

(0.83mm2)

20 30 45 75

65 100 160 260

Accessory Connector Information

Pin No. Power Source

1 :

2 :

3 :

4 :

24 V AC LIVE

24 V AC NEUTRAL

Ground

Not used

Prepare the individual conductors for clamping.

Use MOLEX band tool part number 57027-5000

(for UL-Style Cable UL1015) or 57026-5000 (for UL-

Style UL-1007) for clamping the contacts.

After clamping the contacts, push them into the

proper holes in the accessory connector of this

camera until they snap in place.

1. Shrinking the cable-entry seal is a one-time

procedure. Do not shrink the cable-entry

seal until it has been ascertained that the

unit is functioning.

CONNECT THIS TO 24V AC CLASS 2

POWER SUPPLY ONLY.

2. To prevent fire or electric shock hazard, the

UL listed wire VW-1 style 1007 should be

used for the cable for 24V AC Input

Terminals.

Insert

Up Wire

Contact

Wire

Approx.

3 mm (1/8 inch)

Insert the wire until A position

and clamp the contacts.

• Power supply connection

CAUTIONS

-6-

INSTALLATION

Important Notices:

• The following installation should be made by

qualified service personnel or system installers

and should confirm to all local codes.

• Be sure to use a ceiling board having enough

strength to support this camera.

1. Mounting the camera fixing bracket

1-1. Make a hole (diameter 75mm) in the ceiling

board in the desired location.

1-2. Fix the camera fixing bracket onto the ceiling

board by using four camera fixing bracket

mounting screws (not provided).

Note:

Before fixing the bracket with screws, confirm

the direction of the camera by checking the

position of signs “FRONT gUPPER” and

“REAR gLOWER” on the camera fixing brack-

et.

“FRONT gUPPER” sign indicates the direc-

tion of the camera head.

“REAR gLOWER” sign indicates the direction

opposite to the camera head.

2. Mounting the camera onto the camera

fixing bracket

2-1. Make sure the video output cable and power

cable are fixed by the coaxial cable clamps.

2. Pass the video output cable and power cable

through the hole in the camera fixing bracket,

and connect as described in the previous sec-

tion “CONNECTION.”

REAR LOWER

FRONT UPPER

OPENLOCK

ø75 mm (ø2-15/16”)

Mounting hole

Ceiling board

Coaxial cable clamps

Power cable

Video output cable

Mounting screws (not provided)

Ceiling board

Camera

fixing angle

-7-

Notes:

• If the camera body is not installed correctly in

the camera fixing bracket, the fall prevention

cap cannot be inserted.

• The camera body cannot be moved after the

fall prevention cap is installed.

• When you need to remove the camera body,

first remove the fall prevention cap.

OPEN

LOCK

OPEN LOCK

2-3. Remove the dome cover from the camera by

turning it counterclockwise.

2-4. Match the slit in the camera fixing bracket with

the lock line on the camera, and mount the

camera onto the camera fixing bracket.

2-5. Turn the camera in the LOCK direction until the

lock tab of the camera fixing bracket meets the

lock line of the camera.

OPEN

LOCK

OPEN

LOCK

2-6. Attach the fall prevention cap on the lock tab

of the camera fixing bracket as shown below to

prevent the camera from falling down.

OPEN

LOCK

Slit

Lock

line

Lock tab Lock line

-8-

2-7. Match the four grooves on the camera with the

four projections on the dome cover.

2-8. Attach the dome cover to the camera by turn-

ing this cover clockwise so that the window in

the dome cover matches the camera head.

OPEN

LOCK

OPEN

LOCK

Grooves

Projections

Andere Handbücher für WVCF254 - COLOR CAMERA

Inhaltsverzeichnis

Andere Panasonic Sicherheitskamera Handbücher

Panasonic

Panasonic HC-V210 Montage- und Serviceanleitung

Panasonic

Panasonic BL-C160 Bedienungsanleitung

Panasonic

Panasonic WV-CP450 Bedienungsanleitung

Panasonic

Panasonic WV-S2531LN Betriebsanleitung

Panasonic

Panasonic BB-HCA10CE Bedienungsanleitung

Panasonic

Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Bedienungsanleitung

Panasonic

Panasonic Super Dynamic III WV-CW384 Bedienungsanleitung

Panasonic

Panasonic WV-CF314LE Series Bedienungsanleitung

Panasonic

Panasonic GPMF622 - MACHINE VISION CAMER Bedienungsanleitung

Panasonic

Panasonic BL-C20A - Network Camera Bedienungsanleitung

Panasonic

Panasonic BB-HCM403A Bedienungsanleitung

Panasonic

Panasonic WVCP120 - COLOR CCTV CAMERA Bedienungsanleitung

Panasonic

Panasonic A-88-V Bedienungsanleitung

Panasonic

Panasonic AK-HC1800G Bedienungsanleitung

Panasonic

Panasonic KX-HCM110 Bedienungsanleitung

Panasonic

Panasonic Super Dynamic III WV-CW960 Bedienungsanleitung

Panasonic

Panasonic WV-CP630G Bedienungsanleitung

Panasonic

Panasonic AKHC910 - 1080I CAMERA Bedienungsanleitung

Panasonic

Panasonic WV-S1570L Betriebsanleitung

Panasonic

Panasonic WV-NS950/G Bedienungsanleitung

Panasonic

Panasonic WV-CP290 series Bedienungsanleitung

Panasonic

Panasonic WVBP330 - B/W CCTV CAMERA Bedienungsanleitung

Panasonic

Panasonic BB-HNP15 Betriebsanleitung

Panasonic

Panasonic WV-X4172 Montage- und Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung