Panasonic WVCF324 - COLOR CAMERA Bedienungsanleitung

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

No model number suffix is shown in this manual.

Color CCTV Camera

Operating Instructions

Model No. WV-CF324

FRANÇAIS ENGLISH

The lightning flash with arrow-

head symbol, within an equilater-

al triangle, is intended to alert the

user to the presence of uninsu-

lated "dangerous voltage" within

the product's enclosure that may

be of sufficient magnitude to con-

stitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and mainte-

nance (servicing) instructions in

the literature accompanying the

appliance.

The serial number of this product may be found

on the surface of the unit.

You should note the model number and serial

number of this unit in the space provided and

retain this book as a permanent record of your

purchase to aid identification in the event of

theft.

Model No.

Serial No.

NOTE: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed

and used in accordance with the instruction manu-

al, may cause harmful interference to radio com-

munications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case

the user will be required to correct the interference

at his own expense.

FCC Caution: To assure continued compliance,

(example - use only shielded interface cables

when connecting to computer or peripheral

devices). Any changes or modifications not

expressly approved by the party responsible for

compliance could void the user’s authority to oper-

ate this equipment.

For U.S.A

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

This Class A digital apparatus complies with

Canadian ICES-003.

For Canada

ENGLISH VERSION

WARNING:

• This apparatus must be earthed.

• To prevent fire or electric shock hazard, do not

expose this apparatus to rain or moisture.

• The apparatus should not be exposed to drip-

ping or splashing and that no objects filled with

liquids, such as vases, should be placed on the

apparatus.

• All work related to the installation of this prod-

uct should be made by qualified service per-

sonnel or system installers.

• The connections should comply with local elec-

trical code.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

S3125A

ENGLISH

Limitation of Liability

THIS PUBLICATION IS PROVIDED "AS IS"

WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO, THE IMPLIED WAR-

RANTIES OF MERCHANTABILITY, FITNESS

FOR ANY PARTICULAR PURPOSE, OR

NON-INFRINGEMENT OF THE THIRD

PARTY'S RIGHT.

Disclaimer of Warranty

IN NO EVENT SHALL MATSUSHITA ELEC-

TRIC INDUSTRIAL CO., LTD. BE LIABLE TO

ANY PARTY OR ANY PERSON, EXCEPT FOR

REPLACEMENT OR REASONABLE MAINTE-

NANCE OF THE PRODUCT, FOR THE

CASES, INCLUDING BUT NOT LIMITED TO

BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING

WITHOUT LIMITATION, DIRECT OR

INDIRECT, SPECIAL, CONSEQUENTIAL

OR EXEMPLARY, ARISING OUT OF OR

RELATING TO THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE

CAUSED BY INAPPROPRIATE USE OR

NEGLIGENT OPERATION OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE,

REPAIR OR MODIFICATION OF THE

PRODUCT BY THE USER;

(4) INCONVENIENCE OR ANY LOSS ARIS-

ING WHEN IMAGES ARE NOT DIS-

PLAYED, DUE TO ANY REASON OR

CAUSE INCLUDING ANY FAILURE OR

PROBLEM OF THE PRODUCT;

(5) ANY PROBLEM, CONSEQUENTIAL

INCONVENIENCE, OR LOSS OR DAM-

AGE, ARISING OUT OF THE SYSTEM

COMBINED BY THE DEVICES OF THIRD

PARTY;

(6) ANY CLAIM OR ACTION FOR DAM-

AGES, BROUGHT BY ANY PERSON OR

ORGANIZATION BEING A PHOTO-

GENIC SUBJECT, DUE TO VIOLATION

OF PRIVACY WITH THE RESULT OF

THAT SURVEILLANCE-CAMERA'S PIC-

TURE, INCLUDING SAVED DATA, FOR

SOME REASON, BECOMES PUBLIC OR

IS USED FOR THE PURPOSE OTHER

THAN SURVEILLANCE.

THIS PUBLICATION COULD INCLUDE

TECHNICAL INACCURACIES OR TYPO-

GRAPHICAL ERRORS. CHANGES ARE

ADDED TO THE INFORMATION HEREIN, AT

ANY TIME, FOR THE IMPROVEMENTS OF

THIS PUBLICATION AND/OR THE CORRE-

SPONDING PRODUCT (S).

Preface

The WV-CF324 is surveillance color CCTV camera equipped with a 1/4-inch type {1/4"} CCD

solid-state image sensor with 768 of horizontal pixels.

These cameras can be mounted on a ceiling or a wall without any difficulty.

Features

WV-CF324 is provided with the adaptive black stretch function, high resolution of 540 TV lines

(horizontal), and minimum illuminance of 1.8 lx (F1.3) thanks to the adoption of the newly-devel-

oped digital signal processor.

WV-CF324 has the ABF function. (ONE PUSH AF)*

* The ABF function does not cover the full focus range. Manual coarse adjustments for the

angle of view and focus are required. After that, the ABF function provides precise focus

adjustment automatically.

CONTENTS

Important Safety Instructions ..................................................................................................... 3

Limitation of Liability ................................................................................................................... 4

Disclaimer of Warranty ............................................................................................................... 4

Preface ....................................................................................................................................... 5

Features ..................................................................................................................................... 5

Precautions ................................................................................................................................ 7

Major Operating Controls and Their Functions .......................................................................... 9

Installations and Connections .................................................................................................... 11

■Preparations ........................................................................................................................ 11

■Disassembling the Camera ................................................................................................. 12

■Connections ........................................................................................................................ 12

■Image Adjustment ...............................................................................................................13

■Assembling the Camera ...................................................................................................... 15

Specifications ............................................................................................................................. 16

Standard Accessories ................................................................................................................ 17

Optional Accessories ................................................................................................................. 17

Precautions

This product has no power switch.

Power is supplied from an external 12 V

DC/24 V AC power-supply device. Refer to

service personnel for how to turn on/off the

power.

To keep on using with stable performance

• Parts of this product may deteriorate and

it may shorten lifetime of this product

when using in locations subject to high

temperatures and high humidity. Do not

expose the product to direct heat such

from a heater.

• Use this product at temperature within

–10 °C - +50 °C {14 °F - 122 °F} and

humidity below 90 %. (When using the

product without turning the power off)

Do not rub your hands with the metallic

edges.

This could cause injury.

Do not attempt to disassemble the cam-

era.

To prevent electric shock, do not remove

screws or covers.

There are no user-serviceable parts inside.

Ask qualified service personnel for servicing.

Handle the camera with care.

Do not abuse the camera. Avoid striking,

shaking, etc. The camera could be damaged

by improper handling or storage.

Do not touch the dome cover with your

bare hands.

A dirty dome cover causes deterioration of

picture quality.

Cleaning the camera body

Turn the power off when cleaning of the cam-

era. Use a dry cloth to clean the camera.

Do not use strong abrasive detergent when

cleaning the camera body. When the dirt is

hard to remove, use a mild detergent and

wipe gently. Then, wipe off the remaining

detergent with a dry cloth.

Otherwise, it may cause discoloration. When

using a chemical cloth for cleaning, read the

caution provided with the chemical cloth

product.

Discoloration on the CCD color filter

When continuously shooting a bright light

source such as a spotlight, the color filter of

the CCD may have deteriorated and it may

cause discoloration. Even when changing the

fixed shooting direction after continuously

shooting a spotlight for a certain period, the

discoloration may remain.

Do not aim the camera at strong light

sources.

A light source such as a spot light causes a

blooming (light bleeding) or a smear (vertical

lines).

Smear Bright subject

Blooming

Use this product for indoor use only.

Do not expose this product to direct sunlight

for hours and do not install the product near

a heater or an air conditioner. Otherwise, it

may cause deformation, discoloration and

malfunction. Keep this product away from

water.

Avoid installing in the following locations.

• Locations where it may get wet from rain

or water splash

• Locations where a chemical agent is

used such as a swimming pool (not only

outdoor)

• Locations subject to steam and oil smoke

such as a kitchen

• Locations near flammable gas or vapor

• Locations where radiation or x-ray emis-

sions are produced

• Locations subject to strong magnetic

field or radio waves

• Locations where corrosive gas is pro-

duced

• Locations where it may be damaged by

briny air such as seashores

• Locations where the temperature is not

within –10 °C - +50 °C {14 °F - 122 °F}.

• Locations subject to vibrations (This

product is not designed for on-vehicle

use.)

Installing place

Contact your dealer for assistance if you are

unsure of an appropriate place in your partic-

ular environment.

Make sure that the installation area is strong

enough to hold the camera, such as a con-

crete ceiling.

Do not install the camera in a humid or

dust-laden environment.

Otherwise, lifetime of the internal parts may

be shortened.

Be sure to remove this product if it is not

in use.

Radio interference

When the camera is used near TV/radio

antenna, strong electric field or magnetic

field (near a motor or a transformer), images

may be distorted and noise sound may be

produced.

Mounting screws

It is necessary to procure screws or bolts to

mount the camera. Prepare them according

to the material and strength of the area

where the camera is to be installed. The

screws and bolts must be tightened with an

appropriate tightening torque according to

the material and strength of the installation

area.

Major Operating Controls and Their Functions

TOP LOCK

B.S BLC

ALC

ELC

D/N

OFF

MONITOR

q!3

qVideo output connector

Composite video signals are transmitted.

If this unit is connected to the multiplex

unit, the multiplexed VD2 that is priori-

tized over INT is automatically selected.

wAF switch [ONE PUSH AF]

Refer to the page 14.

eMonitor output jack (RCA jack)

[MONITOR]

Connects the LCD monitor and such

devices for checking images.

rDip switch

Selects ON/OFF of light control mode,

backlight compensation, Adaptive Black

Stretch or Simple day/night mode.

• Simple day/night mode selector [D/N]

ON: The camera selects black-and-

white mode if the picture is dark, or

color mode if the picture is bright

enough.

OFF: Color picture is displayed normal-

ly.

Default setting: OFF

Note: The simple day/night function is

established by utilizing the SENSE

UP function for B/W images. The IR

filter is secured.

BLC

ALC

ELC

B.S.

D/N

OFF

• Adaptive Black Stretch selector [B.S.]

ON: The dark area of the object is auto-

matically corrected to lighten it.

OFF: Does not compensate.

Default setting: ON

Important: In the case of "ON" setting,

noise may be increased in the dark

area of the object.

In addition, darkness and brightness

may be emphasized in the vicinity of

the boundary between the dark and

bright areas.

•

Backlight compensation selector [BLC]

ON: Compensates the background auto-

matically if it is brighter than the

object.

OFF: This mode is used when the front

of the object is extremely bright.

Default setting: OFF

Note: Under conditions such as

extremely strong backlight, the

desired compensation effect may

not be achieved even with this mode

set to ON to detect the backlight

level.

• Light control mode selector

[ALC/ELC]

ALC: Adjusts the lens iris automatically.

ELC: This mode is used for manual

focus adjustment.

Default setting: ALC

tLED for AF

yShipping lock screw (blue screw)

Remove this screw before setting the

camera.

uAzimuth adjuster

Adjusts the azimuth angle of the cam-

era.

iTilting table

Adjusts the tilting position of the camera.

oFocus lever

!0 Zoom lock lever

!1 Panning table

Adjusts the panning position of the cam-

era.

!2 Panning table lock screw [LOCK]

Fixes the panning table.

!3 Power cable

Supplies 24 V AC or 12 V DC from an

external power source.

Andere Handbücher für WVCF324 - COLOR CAMERA

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Sicherheitskamera Handbücher

Panasonic

Panasonic WV-SW550 Series Bedienungsanleitung

Panasonic

Panasonic Super Dynamic III WV-CW384 Bedienungsanleitung

Panasonic

Panasonic VIDEOLARM PCF3 Merkblatt

Panasonic

Panasonic Super Dynamic III WV-CW484F Bedienungsanleitung

Panasonic

Panasonic PI-DUA5MWA Bedienungsanleitung

Panasonic

Panasonic GP-US522CUE Bedienungsanleitung

Panasonic

Panasonic WV-CW504S Bedienungsanleitung

Panasonic

Panasonic I-PRO EXTREME Series Bedienungsanleitung

Panasonic

Panasonic WV-CW244 Series Bedienungsanleitung

Panasonic

Panasonic BB-HCM381 Bedienungsanleitung

Panasonic

Panasonic WVCPR650 - CCTV CAMERA Bedienungsanleitung

Panasonic

Panasonic WV-SFV531 Bedienungsanleitung

Panasonic

Panasonic OneHome KX-HCM110A Bedienungsanleitung

Panasonic

Panasonic AWHE50HN - HD INTEGRATED CAMERA Betriebsanleitung

Panasonic

Panasonic WVBP120 - CCTV CAMERA Bedienungsanleitung

Panasonic

Panasonic KX-HNC600E Bedienungsanleitung

Panasonic

Panasonic WVCW474S - COLOR CCTV CAMERA Bedienungsanleitung

Panasonic

Panasonic AKHC900 - COLOR CAMERA Bedienungsanleitung

Panasonic

Panasonic BL-C230A Bedienungsanleitung

Panasonic

Panasonic WV-CF224EX Bedienungsanleitung

Panasonic

Panasonic WV-CF344 Series Bedienungsanleitung

Panasonic

Panasonic WV-SW355PJ Bedienungsanleitung

Panasonic

Panasonic KX-HNB700 Bedienungsanleitung

Panasonic

Panasonic WV-CP410 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung