Panasonic 3333 Bedienungsanleitung

Panasonic Electric Works Fire & Security Technology Europe AB

Jungmansgatan 12, SE-211 19 Malmö, Sweden

Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99

[email protected] • www.panasonic-fire-security.com

Fire alarm systems

Addressable manual

call point

3333

•Attractive design compliant with EN54-11

•Test key for routine testing without breaking the glass element

•Protection against accidental operation

General

The call point has an attractive design

compliant with EN54-11, and is either

surface mounted in the supplied red backbox

or recess mounted in a standard UK single

gang box or a Swedish 65 mm circular

backbox. It has a clip retained front cover

that makes it easy to replace the glass

element and adds security since the clips are

concealed. The frangible element is a glass

element with a protective plastic film. To

operate the call point, the glass element is

pressed until it is broken. This will activate

the built-in microswitch, which will generate

a fire alarm in the c.i.e.

Test key

Routine testing is made with a supplied test

key, without breaking the glass element.

Inserting the test key simulates the breaking

of the glass element. The call point is

automatically reset when the test key is

removed. The test key is also used to

release the security clips for the front cover.

Protective cover

To protect the call point against accidental

operation, a transparent polycarbonate cover

has to be lifted to get access to the glass

element.

Encapsulated circuit

All electronics are encapsulated. Only the

terminal block is accessible from the rear.

LED indicator

An LED on the front cover indicates fire

alarm generated by the call point.

Flashing LED: The LED will flash each

time the c.i.e. communicates with the call

point, until the call point is operated and the

LED is switched on.

Non-flashing LED: The LED is switched

off, until the call point is operated and the

LED is switched on.

Connections / Settings

The COM loop is connected directly to the

call point via a 4-way terminal block. For

COM loop address setting is the address

setting tool 3314 is used. 3314 is also used

to set the call point type and the LED mode:

•NORMAL mode (EBL512 SW version

>2.0 / EBL128): M.c.p. type 3333.

(Flashing or non-flashing LED is set via

Win512 / Win128.)

•2330 mode: M.c.p. type 2333, flashing

LED.

•2312 mode: M.c.p. type 2333, non-

flashing LED.

Two flying leads (wires) are connected to

the terminal block, for connection of the

3314 address setting tool's connection cable.

The wires are to be disconnected before the

COM loop wires are connected.

Product applications

Used in the systems EBL512 / 128 / 1000 /

2000 and is intended for indoor use and in

dry premises.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet Date of issue Revision / Date of revision

MEW00097 2001-10-19 5 / 2008-09-24

Type numbers

3333 Addressable manual call point

2347 Replacement glass (10 pcs.)

2348 Replacement polycarbonate cover (10 pcs.)

Technical data

Voltage (V DC)

allowed

nominal

12-30

Current consumption at nom. volt.

from COM loop (mA)

quiescent / active

2 / 5

Ambient temperature (°C)

operating / storage

-10 to +55 / -40 to +85

Ambient humidity (% RH) max. 90, non condensing

Ingress Protection rating IP42

Weight (g) 290

Construction / Colour ABS / Red (ISO 3864)

Approvals CE, EN54-11

Inhaltsverzeichnis

Andere Panasonic Rauchmelder Handbücher

Panasonic

Panasonic 3378 Bedienungsanleitung

Panasonic

Panasonic EBL128 Technisches Handbuch

Panasonic

Panasonic Units for Hazardous Betriebsanleitung

Panasonic

Panasonic EBL512 Bedienungsanleitung

Panasonic

Panasonic 3312F Bedienungsanleitung

Panasonic

Panasonic 3339 Bedienungsanleitung

Panasonic

Panasonic 6295 Bedienungsanleitung

Panasonic

Panasonic 6367 Bedienungsanleitung

Panasonic

Panasonic 4318 Bedienungsanleitung

Panasonic

Panasonic 2217 Bedienungsanleitung

Panasonic

Panasonic 3309 Bedienungsanleitung

Panasonic

Panasonic 3377 Bedienungsanleitung

Panasonic

Panasonic 6362 Bedienungsanleitung

Panasonic

Panasonic 1828 Bedienungsanleitung

Panasonic

Panasonic 6363 Bedienungsanleitung

Panasonic

Panasonic 4301 Bedienungsanleitung

Panasonic

Panasonic EBL128 Bedienungsanleitung

Panasonic

Panasonic 2318 Bedienungsanleitung

Panasonic

Panasonic 1826 Bedienungsanleitung

Panasonic

Panasonic EBL512 G3 5000 Bedienungsanleitung

Panasonic

Panasonic EBL128 Bedienungsanleitung

Panasonic

Panasonic MEW01 351 Technisches Handbuch

Panasonic

Panasonic 4313 Bedienungsanleitung

Panasonic

Panasonic MEW00098 Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung