Panasonic AVHSB300G - HD ANALOG BOARD Bedienungsanleitung

FRANÇAIS DEUTSCH ENGLISHITALIANOESPAÑOL

РУССКИЙ

日本語

Before operating this product, please read the instructions carefully and save this manual for

future use.

Operating Instructions

HD Analog Board

Model No. AV-HSB300G

1 (E)

indicates safety information.

This class A digital apparatus complies

with Canadian ICES-003.

Cet appareil numérique de la classe A

est conforme à la norme NMB-003 du

Canada.

For CANADA

Safety precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (service) instructions in the

literature accompanying the appliance.

WARNING:

• TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

• THE APPARATUS SHALL NOT BE EXPOSED

TO DRIPPING OR SPLASHING AND THAT

NO OBJECTS FILLED WITH LIQUIDS, SUCH

AS VASES, SHALL BE PLACED ON THE

APPARATUS.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD AND ANNOYING INTERFERENCE,

USE THE RECOMMENDED ACCESSORIES

ONLY.

FCC Note:

This equipment has been tested and found

to comply with the limits for a class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when

the equipment is operated in a commercial

environment. This equipment generates, uses,

and can radiate radio frequency energy, and

if not installed and used in accordance with

the instruction manual, may cause harmful

interference to radio communications. Operation

of this equipment in a residential area is likely to

cause harmful interference in which case the user

will be required to correct the interference at his

own expense.

Warning:

To assure continued FCC emission limit

compliance, the user must use only shielded

interface cables when connecting to external units.

Also, any unauthorized changes or modifications

to this equipment could void the user’s authority to

operate it.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK

HAZARD, REFER CHANGES OF SWITCH

SETTINGS INSIDE THE UNIT TO QUALIFIED

SERVICE PERSONNEL.

ENGLISH VERSION

2 (E)

ENGLISH

indicates safety information.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install

in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources

such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord form being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination to

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms

or when unused for long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Read these operating instructions carefully before using the unit. Follow the safety instructions on the

unit and the applicable safety instructions listed below. Keep these operating instructions handy for future

reference.

IMPORTANT SAFETY INSTRUCTIONS

Safety precautions

3 (E)

Contents

Safety precautions ....................................... 1

Introduction ................................................... 3

Accessory ..................................................... 3

Name of each part ........................................ 4

Mounting ....................................................... 4

Connections .................................................. 7

Appearance ................................................... 8

Specifications ............................................... 8

Introduction

Installing this HD analog board in a multi-format live switcher AV-HS300G makes it possible to support five HD

analog component inputs. The signal formats support HD formats (1080/59.94i, 1080/50i, 720/59.94p, 720/50p).

Accessory

Operating instructions .................. 1

Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households)

This symbol on the products and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling, please take these products to designated

collection points, where they will be accepted on a free of charge basis. Alternatively, in some

countries you may be able to return your products to your local retailer upon the purchase of an

equivalent new product.

Disposing of this product correctly will help to save valuable resources and prevent any potential negative

effects on human health and the environment which could otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct

method of disposal.

Safety precautions

4 (E)

ENGLISH

Name of each part

!.!,/').0543



9 0B 0R



9 0B 0R



9 0B 0R



9 0B 0R



9 0B 0R



1to 5: Analog HD component input connectors [ANALOG INPUTS 1 to 5]

Mounting

Install this board in the multi-format live switcher AV-HS300G.

<NOTES>

Be sure to ask the store or dealer where you purchased the product for assistance with mounting and

removal.

Set to OFF and unplug the power connector before mounting and removal.

Before handling the HD analog board, touch a metal part of the AV-HS300G to discharge the static

electricity from the human body.

An anti-static wrist strap is recommended for safety. Failures may be caused if you touch the HD analog

board while you are still charged with static electricity.

Keep the metal parts of the HD analog board free of contact with other metal parts.

Be sure to mount the blank panel installed with the AV-HS300G, after removing the HD analog board.

1Turn off the power of the AV-HS300G, and unplug the power connector.

2Remove the 6 screws (A).

Screws (A)

AV-HS300G

5 (E)

Mounting

3Remove the upper panel cover.

Upper panel cover

4Remove the 2 screws (B), and remove the blank panel.

Blank panel

Screws (B)

5Remove the 3 screws (C) and 1 cable clamp.

Cable clamp

Screws (C)

6Insert the HD analog board from the inside of the rear panel, and insert it along the guide rail for the connector.

(Insert it securely and completely.)

HD analog board

Connector

6 (E)

ENGLISH

Mounting

7Install the board securely using the 2 screws (B)

and 3 screws (C).

(At this stage, install the cable clamp as well.)

Screws (B)

Screws (C)

Cable clamp

8Tighten the 6 screws (A) for the upper panel

cover securely.

Screws (A)

9After attaching the required cables, insert the power connector and turn the power on.

For details on the setting and operating procedures, refer to the operating instructions of the AV-HS300G.

If the HD analog board has been connected properly, “ANLG” will appear at the OPT item on the

AV-HS300G ’s SETUP/STATS menu (15/15).

STATS

15/15

ALM

OPT

ANLG

VER

1.00

In order for the analog HD component signals to take effect, select “ANLG” (analog HD component) in the

MODE item setting for each of the input channels (IN1 to IN5) from the AV-HS300G ’s SETUP/IN1-5 menu

(1/15). Analog HD component signals and SDI signals cannot be used at the same time in the same input

channel.

Additionally, the gain of the input signals is set using the GAIN item.(The gain can be set within the

30-step range, and the setting will result in changes of 2 dB. The amount by which the gain changes per

step is not the same for each step.)

SDIIN2

IN3

IN4

IN5

IN1-5

1/15

SIG

IN1

MODE

ANLG

GAIN

-30—30

Removal procedure

Remove the HD analog board by following the procedures for mounting it in reverse.

7 (E)

Connections

Make the connection with the HD analog board while the power is off.

For details on connecting individual devices, refer to the respective operating instructions.

For details on operating individual devices, refer to the respective operating instructions.

Connections when gen-lock is not implemented (frame synchronizer ON)

HD camera

VTR

AC adapter

AW-PS505A

DVI or VGA

SDI (HD)

HD Component

HD component

monitor

HD SDI monitor

Multi-format

live switcher

AV-HS300G

DVD player

HD Component

HD component

monitor

HD analog board

AV-HSB300G

HD Component

Printed in Japan

Gedruckt in Japan

Imprimé au Japon

Stampato in Giappone

Impreso en Japón

Напечатано в Японии

VQTB0155-1 F1206S2037 D

Matsushita Electric Industrial Co., Ltd.

Web Site: http://panasonic.net

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY

UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA

Headquarters:

3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-5300

EASTERN ZONE:

3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196

WESTERN ZONE:

3330 Cahuenga Blvd. West, Los Angeles, CA 90068 (323) 438-3608

Government office:

(201) 348-7587

Broadcast PARTS INFORMATION & ORDERING:

9:00 a.m. – 5:00 p.m. (PST) (800) 334-4881/24 Hr. Fax (800) 334-4880

Emergency after hour parts orders (800) 334-4881

TECHNICAL SUPPORT:

Emergency 24 Hour Service (800) 222-0741

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010

Panasonic de Mexico S.A. de C.V.

Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127

Panasonic Puerto Rico Inc.

San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300

松下電器産業株式会社　ブロードメディア本部

〒223-8639　横浜市港北区綱島東4丁目3番1号　　フリーダイヤル　0120

－

878

－

410

Inhaltsverzeichnis

Andere Panasonic Schalten Handbücher

Panasonic

Panasonic AV-HS450N Bedienungsanleitung

Panasonic

Panasonic ABJ Bedienungsanleitung

Panasonic

Panasonic KX-HNB600 Bedienungsanleitung

Panasonic

Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Bedienungsanleitung

Panasonic

Panasonic AV-HS400A Bedienungsanleitung

Panasonic

Panasonic Light Touch Switches EVQP4 Bedienungsanleitung

Panasonic

Panasonic AWSW350P - SWITCHER Bedienungsanleitung

Panasonic

Panasonic EVQPU Bedienungsanleitung

Panasonic

Panasonic PN261693-NZ Bedienungsanleitung

Panasonic

Panasonic AW-HS50 Series Bedienungsanleitung

Panasonic

Panasonic AWHB505 - MULTIPORT HUB Bedienungsanleitung

Panasonic

Panasonic ABV Bedienungsanleitung

Panasonic

Panasonic KX-HNB600FX Bedienungsanleitung

Panasonic

Panasonic AG-HMX100 Bedienungsanleitung

Panasonic

Panasonic GA-ML8THPoE+ Bedienungsanleitung

Panasonic

Panasonic AVM3P (PS) Bedienungsanleitung

Panasonic

Panasonic PN28160A Bedienungsanleitung

Panasonic

Panasonic Micro SD KX-HN6032AZW Bedienungsanleitung

Panasonic

Panasonic WJ-SQ208 Bedienungsanleitung

Panasonic

Panasonic AJ9 (J9) Bedienungsanleitung

Panasonic

Panasonic AV-HS04M1 Bedienungsanleitung

Panasonic

Panasonic WJ-SW208E Bedienungsanleitung

Panasonic

Panasonic AWHB505 - MULTIPORT HUB Bedienungsanleitung

Panasonic

Panasonic ZEQUO 6600RE Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung