Panasonic Toughbook CF-H1ADBBGJM Bedienungsanleitung

Reference Manual

Personal Computer

Model No. CF-H1 Series

We recommend that this Reference Manual be printed.

Introduction

This manual explains using the Windows 7 default setting.

Windows Aero

Do not turn Windows Aero on with this computer.

Windows Update

You can update to the latest patches and service packs for Windows with the following menus.

(Start) - [All Programs] - [Windows Update]

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required, contact your

technical support office.

Terms and illustrations in this manual

Î: Page in this Manual.

: Conditions that may result in minor or moderate injury.

: Useful and helpful information.

Click : Touch the screen with the digitizer pen or finger.

Right-click

Touch and hold with the digitizer pen.

You can also perform “Right-click” by pressing and holding the button of the digitizer pen, and then tapping the

object.

(Start) - [All Programs] :

Click (Start), and then click [All Programs].

: Press [ ] (Enter) key.

Ctrl

: Press and hold

Ctrl

key, and then press

key.

zThe display of the key may be different from this manual according to the keyboard used. (e.g. “Delete” instead of

“Del”)

Read the term “hard disk” as “flash memory” whenever it appears in this manual.

Regarding Windows 7

Introduction

Windows Live mail

As in Windows mail for Windows Vista or Outlook Express 6 for Windows XP, Windows 7 contains mail software called

Windows Live mail.

zDepending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the sound

at startup.

ARight-click the desktop and click [Personalize] - [Sounds].

BRemove the check mark from [Play Windows Startup sound], and click [OK].

If high-frequency sound occurs while using the computer

A standard user needs to enter an administrator password and click [OK].

• Set [USB selective suspend setting] to [Enabled].

AClick (Start)- [Control Panel] - [System and Security] - [Power Options].

BClick [Change plan settings] of the current power plan.

CIn [Change settings for the plan], click [Change advanced power settings].

DIn [Advanced settings], double-click [USB settings].

EDouble-click the displayed [USB selective suspend setting].

FChange settings of [On battery] and [Plugged in] to [Enabled].

GClick [OK] and exit the [Advanced settings] screen.

Sound and Video

Touch Screen Operation

You can use Windows by touching the screen in the same way as you use a mouse.

The screen of this computer has following two pointing device functions.

zDigitizer: can be operated with the digitizer pen (included)

zTouchscreen: can be operated with your finger etc.

You can use the touchscreen function to perform the same operation as a mouse. Touch the screen surface with the digitizer

pen.

For further information, click

(

Start) - [Control Panel] - [Hardware and Sound] - [Pen and Touch] - [Flicks] - [Practice using

flicks].

zTo right-click

You can perform “Right-click” with either of operation below.

zTouch and hold with the digitizer pen.

zPress and hold the button (A) of the digitizer pen, and then touch the object.

You can perform “Right-click” with either of operation below.

zTouch and hold with the digitizer pen.

NOTE

zThe operation by touching the screen does not work in the Setup Utility.

zWhen inputting on the [Command Prompt] screen, apply the keyboard input mode to [Tablet PC Input Panel]. You can-

not input correctly with the Writing Pad.

zTouch the screen with the digitizer pen (included) or your finger

When touching the screen, use only the digitizer pen (included) or your finger on the surface.

Touching the screen with an object other than the digitizer pen (included) or your fingertip (a fingernail or metal object, or

other hard or sharp objects that may leave a mark) may scar or stain the surface, causing the malfunction.

zDo not apply too much pressure when touching the screen

Only a light touch is required to touch the screen. Applying too much pressure may damage the surface.

Operation by touching the screen

Touch Screen Operation

zWhen the screen becomes dirty, wipe it with a soft cloth

The screen is specially treated to prevent dirt from adhering to the surface, so dirt can be removed easily using a dry

cloth. If the dirt does not come off easily, breathe on the surface and try again.

Do not apply water or solvents to the soft cloth.

zWash the soft cloth when it becomes dirty

When the soft cloth becomes dirty, wash it with mild detergent. Do not use bleach or fabric conditioner (softener), or try to

sterilize the cloth by boiling.

If the soft cloth is dirty, it may be ineffective in cleaning the screen, and in fact may cause dirt to adhere to the screen.

zCheck the following to prevent the surface of the screen from being scratched

zAre you using the digitizer pen or your finger to operate the screen?

zIs the surface clean?

zIs the soft cloth clean?

zIs the tip of the digitizer pen clean?

zIs your finger clean?

zDo not touch the screen outside of the LCD display area

The input area is defined by the LCD display screen. Touching the screen outside of the display area may result malfunc-

tions or damage to the screen.

zDo not apply excessive force to the screen

Do not lift the computer while holding the LCD screen, or allow the screen to be twisted. Do not place any objects on the

LCD screen. Any of the above may cause the screen glass to break, or may damage the LCD screen.

zOperation response may be slower in low temperature environments

The screen may respond to operations more slowly when using the computer in temperatures less than 5°C, but this is

not a malfunction. Response time will return to normal when the computer is returned to room temperature.

zIf the cursor jumps to a location other than where the screen was touched, or if the LCD reso-

lution changes, perform the calibration

Perform the procedure of “Calibration” (Îpage 6).

Maintaining the performance of the screen

Things to keep in mind when using the screen

Touch Screen Operation

To improve the outdoor visibility of the display, a low reflection coating has been added. In order to avoid scratches and peel-

ing of this coating, an approved soft cloth has been included to wipe the LCD surface of the computer. Before using the com-

puter, be sure to read the instructions provided below.

• Use the soft cloth when it is dry. Do not apply water or solvents to the soft cloth.

• First, lightly wipe foreign particles and dust adhering to the LCD display on one side of the soft cloth. Do not use force,

since the LCD surface may be damaged with the foreign particles or dust.

Next, wipe off fingerprint, etc., with the other side of the soft cloth.

After wiping off foreign particles and dust, wash the soft cloth (refer to the following) to remove the foreign particles and

dust from the soft cloth.

• When the soft cloth becomes dirty, wash it with neutral detergent. Do not use bleach or a fabric conditioner (softener), or

carry out sterilization by boiling.

• If the LCD gets wet, wipe the surface lightly with the soft cloth.

• While wiping the LCD display, the computer must be turned off.

Digitizer Calibration

To calibrate the digitizer, use the digitizer pen and follow the steps below.

1Run [Tablet PC Settings].

Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

2Click [Calibrate].

3Select [Pen input].

4Touch each of the 4 “+” target marks one by one.

5Click [Yes].

Suggestions About Cleaning the LCD Surface

zBe sure to wipe the LCD display to remove fingerprints, etc., with the soft cloth.

zDo not wipe areas other than the LCD display with the soft cloth.

Calibration

Touch Screen Operation

Touchscreen Calibration

zTo calibrate the touchscreen, do not use the digitizer pen (included). Use your finger or other objects.

zPerform the calibration for the orientation to be used.

1Run [Tablet PC Settings].

Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

2Click [Calibrate].

3Select [Touch input].

4Using your finger or other object, touch of the 4 “+” target one by one.

5Click [Yes].

Hardware Buttons

*1 Only for model with the Barcode Reader

*2 Only for model without the Barcode Reader

Button Function

Camera Button

Take still pictures. (Îpage 42)

RFID Reader Button

Read the data from RFID tags. (Îpage 51)

Barcode Reader Button

Read the barcode. (Îpage 53)

Application Buttons

Start the registered function or application. (Îpage 17)

Security Button

Works as

Ctrl

Alt

Del

RFID

Application

Buttons

RFID

Camera

Security

Barcode RFID

Application

Buttons

Barcode

RFID

Camera

Security

Hardware Buttons

NOTE

zThe Hardware buttons work when the Windows screen is displayed.

zThe Hardware buttons may not work immediately after Windows is started up or the Windows logon screen (or the

Welcome screen) is displayed.

zThe Hardware buttons may not work after time zone is changed. In this case, restart the computer.

To assign different functions to the Security Button

The Security button functions as

Ctrl

Alt

Del

at the time of purchase.

Also, at the time of purchase, the Security button functions as

while you start up the computer (while [Panasonic] boot

screen is displayed).

You can configure the button to function as buttons

F12

while you start up the computer.

1Start up the Setup Utility (Îpage 82).

2Select [Main].

3Select [SAS Button] and press (Enter).

4Press ÏÐto select the desired button (

F12

) and press (Enter).

5Press

F10

, and then select [Yes] and press (Enter).

NOTE

zWhen the computer has started up, the Security button functions as

Ctrl

Alt

Del

, regardless of the [SAS Button]

setting.

Software Keyboard

You can use the Software Keyboard instead of the on-screen keyboard of Tablet PC Input Panel. By using the Software Key-

board, you can change the size of the Software Keyboard, and can use the numeric keypad.

NOTE

zYou cannot uninstall Tablet PC Input Panel. When you enter text, select either the Software Keyboard or Tablet PC

Input Panel.

1Log on to Windows as an administrator.

2Click (Start) and input [c:\util\pnotif\setup.exe] in [Search programs and files], and

press (Enter).

Follow the on-screen instructions.

3Click (Start) and input [c:\util\meiskb\setup.exe] in [Search programs and files], and

press (Enter).

Follow the on-screen instructions.

4Add a check mark for [Yes, I want to restart my computer now.], and click [Finish].

The computer restarts.

Installing the Software keyboard

Inhaltsverzeichnis

Andere Panasonic Tablette Handbücher

Panasonic

Panasonic FZ-N1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-G1A Series Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook FZ-G1 Bedienungsanleitung

Panasonic

Panasonic FZ-M1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-A2 series Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-X1 Verdrahtungsschema

Panasonic

Panasonic Toughbook FZ-A1 Bedienungsanleitung

Panasonic

Panasonic Toughbook FZ-A1 Bedienungsanleitung

Panasonic

Panasonic FZ-B2 series Bedienungsanleitung

Panasonic

Panasonic FZ-B2 series Bedienungsanleitung

Panasonic

Panasonic JT-B1 series Bedienungsanleitung

Panasonic

Panasonic FZ-A1series Bedienungsanleitung

Panasonic

Panasonic FZ-N1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-M1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-N1 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-H1CEKRZ6M Bedienungsanleitung

Panasonic

Panasonic FZ-L1 Series Bedienungsanleitung

Panasonic

Panasonic CF-08TX1BX1M Bedienungsanleitung

Panasonic

Panasonic Toughbook FZ-G1 Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic TOUGHPAD JT-B1 Series Gebrauchs- und Pflegehandbuch

Panasonic

Panasonic FZ-L1 Series Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Lenovo

Lenovo IdeaTab S6000L Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

ADLINK Technology

ADLINK Technology IMT-BT Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

Getac

Getac E100 Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung