Panasonic EASA-PHONE KX-T123211D Fehlerbehebungshandbuch

Panasonic

Communication Systems Division

Technical Advisory

Updated: Nov. 16, 00

Subject: KX-T123211D Voicemail Integration Program Guide

Document Number: KXTA1232002

Step 1

Check the software version of the KX-T123211D by using PITS programming code 98, which

shows the software version number: Y201Z940430(TM3)

The underlined digits represent the software production date code (format YYMMDD). In this

example, the date code is April 30, 1994 (year, month, day). For this software version, the

software production date of the VPS must be April 30, 1994, or later. If the software production

date of the PBX is earlier than the 4/30/94, call Panasonic Parts Center (MSC) for an

upgrade: 1-800-833-9626.

Step 2

Enable PITS programming code 80 for each extension connected to the VPS.

This parameter is used to tell the KX-T123211D which extensions are connected to the VPS.

Ports with this parameter enabled can receive Follow-on ID and DTMF call status signaling

(busy, answered, disconnect, etc.) if the Voice Mail integration and DTMF integration features

are also enabled.

Step 3

Enable PITS programming code 81 to turn on DTMF Integration.

On extensions with the Voice Mail port parameter enabled, the KX-T123211D can send codes

(DTMF tones) to indicate call states; this increases VPS efficiency. Codes apply to all

transferred calls; CO line calls only indicate disconnect (provided the T123211D is programmed

for CPC detection and the CO sends the CPC signal). Refer to the table on page 4.6.

Step 4

Put all extensions connected to the VPS into one extension group using PITS program 60.

Reserve this extension group for these extensions!

Do not mix other extensions into this group.

Step 5

Enable hunting for the VPS extension group using PITS program 08.

Step 6

Set the hunting type for the VPS extension group to circular; use PITS program 09.

Step 7

At every VPS extension, temporarily connect an SLT or butt set, go off-hook and dial 7301# to

turn on Data Line Security.

This prevents the KX-T123211D from sending Executive Override or Call Waiting tones to

these extensions. We recommend that all Voice Mail port extensions have this feature enabled to

avoid interruption of recording.

Step 8

At every user’s extension, go off-hook and dial 7192#.

This sets the proper Follow-on ID sequence so that forwarded calls go directly to the extension’s

mailbox. The KX-T123211D automatically sends the extension’s digits to the Voice Mail port

before connecting the caller.

For Follow-on ID to work:

• Ports connected to the TVS100 must be assigned as Voice Mail ports.

• Extensions must be forwarded to the first port of the Voice Mail (using the

Busy/No-Answer mode or the All Calls mode).

• The mailbox number should be the same as the extension number.

Interaction with other features:

•Call Forwarding—If the extension is forwarded to an extension that is also forwarded,

the forwarding will not work.

•Call Hunting—Hunting does not interfere with Follow-on ID.

•Call Transfer—Calls transferred to an extension with Follow-on ID enabled

and call forwarding set will be forwarded directly to the mailbox.

•Data Line Security—We recommend that all Voice Mail port extensions have this feature

enabled to avoid interruption of recording by Executive

Override tone or Call Waiting tone.

Step 9

Select the appropriate CO Line feature settings depending on how your customer plans to use the

VPS: A) to answer all incoming calls, B) as an operator backup, or C) to only answer calls not

answered by user extensions.

Recommended CO Line feature settings:

A. If the KX-TVS100 is answering all incoming calls:

CO Mode—Use PITS programs 51 and 52 to set this parameter. Program all lines DIL to

the first extension of the Voice Mail hunt group. The KX-T123211D will allow incoming

CO calls to hunt only if the CO lines are DIL to the first port of the hunt group. Lines

programmed as Normal do not hunt.

B. If the KX-TVS100 is only answering calls not answered by

the operator (Operator Backup):

Flexible Ringing Assignment—For each CO line, use PITS programs 47 (Day Mode) and

48 (Night Mode) to enable ringing at the operator’s extension (jack). Assign CO lines to

ring at VPS prots as suggested below.

2 Ports, 4 Lines 4 Ports, 8 Lines

Ports Lines Ports Lines

1 1, 3 1 1, 5

2 2, 4 2 2, 6

33,7

44,8

Delayed Ringing Assignment—To give the operator time to answer the call before the VPS

picks up, we recommend setting the delay to three or four rings for each extension

connected to the KX-TVS100. Use PITS programs 49 (Day Mode) and 50 (Night Mode).

CO Mode—Set the mode for each CO to Normal. Use PITS programs 51 and 52 to set this

parameter.

C. If the KX-TVS100 is only answering calls not answered by user extensions:

Flexible Ringing Assignment—For each CO line, use PITS programs 47 (Day Mode) and

48 (Night Mode) to enable ringing on every extension (jack) that you want to have ring.

Refer to chart above (9B) for suggested CO line assignments.

Delayed Ringing Assignment—To give users time to answer the call before the VPS picks

up, we recommend setting the delay to three or four rings for each extension connected to

the KX-TVS100. Use PITS programs 49 (Day Mode) and 50 (Night Mode).

CO Mode—Set the mode for each CO to Normal. Use PITS programs 51 and 52 to set this

parameter.

Andere Handbücher für EASA-PHONE KX-T123211D

Inhaltsverzeichnis

Andere Panasonic Telefon Handbücher

Panasonic

Panasonic KX-TH102M Bedienungsanleitung

Panasonic

Panasonic KX-TD500 Bedienungsanleitung

Panasonic

Panasonic KX-UTG200 Bedienungsanleitung

Panasonic

Panasonic KX-TDE600 Bedienungsanleitung

Panasonic

Panasonic KX-TCD715EM Bedienungsanleitung

Panasonic

Panasonic PRL Series Bedienungsanleitung

Panasonic

Panasonic HYBRID IP-PBX KX-TDA100 Bedienungsanleitung

Panasonic

Panasonic KX-T7735 - 3 Line Backlit Display... Bedienungsanleitung

Panasonic

Panasonic KX-TD7895 - Digital Spread Spedtrum... Bedienungsanleitung

Panasonic

Panasonic NS700 Installationshandbuch

Panasonic

Panasonic KX-T7565NE Bedienungsanleitung

Panasonic

Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008... Betriebsanleitung

Panasonic

Panasonic KX-NCP500 Bedienungsanleitung

Panasonic

Panasonic KX-T30810-1 Bedienungsanleitung

Panasonic

Panasonic KX-TDA30 Bedienungsanleitung

Panasonic

Panasonic KX-TA824 Bedienungsanleitung

Panasonic

Panasonic KX-T2378 Bedienungsanleitung

Panasonic

Panasonic KX-NT553 Bedienungsanleitung

Panasonic

Panasonic KX-TG9472C Bedienungsanleitung

Panasonic

Panasonic KX TPA 60 Bedienungsanleitung

Panasonic

Panasonic KX-T7684 Bedienungsanleitung

Panasonic

Panasonic KX-TC1201BXB Bedienungsanleitung

Panasonic

Panasonic KX-TDA30 Bedienungsanleitung

Panasonic

Panasonic KX-TGP500 B04 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung