Panduit GP6 Plus Bedienungsanleitung

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 2 of 3

4. Install jumper troughs between bases with two #12 sheet

metal screws (supplied).

GP6 PLUS Standard Density Tower Kit

Part Number: GPKT724Y

1. Mount tower to wall using #12 wood screws (not provided) or

equivalent. Some applications will require different mounting

hardware. Ensure that the bottom of the tower is at least 8" from

the floor to provide space for horizontal cable manager trough.

2. Route cable bundle into tower and fan out individual cables

into their appropriate positions through the cutouts provided

along the tower leaving 12" to 18" of slack. Each cutout

accommodates up to 6, 4 pair cables. Use cable ties to secure

bundle to raised tabs on back of tower.

3. Position base over slots in tower and secure with two #12

sheet metal screws (supplied). Place conductors into index

strip and install connecting blocks as per instruction sheet

PN153* (provided).

SCREW HERE

CABLE REQUIREMENT: Terminates most 22-26 AWG solid or stranded

IWC wire with a 0.050" (1.27mm) max. o.d., either PVC or Plenum rated.

* Denotes instruction sheet revision letter.

E-mail:

[email protected]m

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

www.panduit.com

Page 3 of 3

5. To help contain cross-connections, install vertical cable managers (P110VCM300) adjacent to towers using #12 wood screws

(not provided) or equivalent.

Attach horizontal cable manager trough to towers and vertical cable managers using #12 sheet metal screws and #12 external tooth

lock washers (provided). Fasten securely to assure grounding. Attach ground lug (P/N:LAM2A2/0-14-6) with 1/4" x 3/4" machine screw,

nut, and 1/4" external tooth lock washer (provided), to the bottom of the horizontal cable manager trough.

Component Quantity per Tower System

Base Trough Connecting Blocks Label Holders Labels

Part Number

GPKT724Y 3

GPB24

P110JT

GPCB4

P110LH

DSLGP

CABLE REQUIREMENT: Terminates most 22-26 AWG solid or stranded

IWC wire with a 0.050" (1.27mm) max. o.d., either PVC or Plenum rated.

INSTALLATION TIPS:

1. GP6 PLUS product terminates most 22-26 AWG solid or stranded IWC wire with a 0.050” (1.27mm) max. o.d., either PVC or Plenum rated.

2. Never install wire into a slot previously used for a larger gauge.

3. Be careful to strip back cable jacket only as required for termination.

4. Use care to maintain pair twists up to the termination strip.

5. When stripping cable jacket, be careful not to cut the insulation on the individual wires.

6. Avoid sharp bends when routing cable.

As with all Wiring Accessories, the following statements apply:

1. Never install communications wiring during a lightning storm.

2. Never install communications wiring in wet locations unless the product is specifically designed for use in wet locations.

3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.

4. Use caution when installing or modifying communication wiring.

Inhaltsverzeichnis

Andere Panduit Netzwerk-Hardware Handbücher

Panduit

Panduit SmartZone PViQ Gebrauchs- und Pflegehandbuch

Panduit

Panduit PANVIEW iQ PVQ-MIQPS96F Bedienungsanleitung

Panduit

Panduit PVQ-FMTMTP-9 Bedienungsanleitung

Panduit

Panduit smartzone G5 Bedienungsanleitung

Panduit

Panduit Atlona AT-HDR-EX-100CEA-RX Bedienungsanleitung

Panduit

Panduit SmartZone Gebrauchs- und Pflegehandbuch

Panduit

Panduit M1 Bedienungsanleitung

Panduit

Panduit PVMAPU24 Bedienungsanleitung

Panduit

Panduit SmartZone PVIQ Series Gebrauchs- und Pflegehandbuch

Panduit

Panduit CDPP8RG-S Bedienungsanleitung

Panduit

Panduit DPOE24U1XG Bedienungsanleitung

Panduit

Panduit Atlona AT-HDR-EX-70C-RX Bedienungsanleitung

Panduit

Panduit NetKey NK366M**Y Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung