Paradox MG-RCV3 Bedienungsanleitung
Wireless Expansion Module V1.0
Reference & Installation Manual
MG-RCV3
Stand-Alone System
MGRCV3ES_EI01.fm Page -3 Wednesday, May 4, 2005 3:27 PM
MGRCV3ES_EI01.fm Page -2 Wednesday, May 4, 2005 3:27 PM
Table of Contents
Introduction ...............................................................................................1
Technical Specifications .................................................................................... 1
System Features ............................................................................................... 2
Installation .................................................................................................2
Location ............................................................................................................. 2
Noise Level Test ................................................................................................ 3
Connections and Mounting ................................................................................ 3
About Programming .................................................................................8
Programming Methods ...................................................................................... 9
Decimal Select Programming............................................................................... 9
Feature Select Programming................................................................................ 9
How To Program ............................................................................................. 10
Programming ..........................................................................................10
Set Code Length ............................................................................................. 10
Set Installer Code ............................................................................................ 10
User Parameters ............................................................................................. 11
Assign a User to the MG-RCV3 (Esprit mode only) ........................................... 12
Assign a Remote Control.................................................................................... 12
Program the Remote Control Buttons ................................................................ 13
Remote Control Button PGM Options ............................................................. 15
Delete an Assigned User (Esprit mode only) .................................................. 16
Delete an Assigned Remote Control ............................................................... 16
Programmable Outputs (PGMs) ............................................................16
PGM Connection ............................................................................................. 17
PGM Output Timer .......................................................................................... 17
Panic Alarm Programming ....................................................................18
Panic Output Programming (Esprit mode only) ............................................... 18
Panic Lockout Timer (Esprit mode only) ......................................................... 18
Panic Alarm PGM Option (Esprit mode only) .................................................. 19
MGRCV3ES_EI01.fm Page -1 Wednesday, May 4, 2005 3:27 PM
System Reset ......................................................................................... 20
List of Programming Sections .............................................................. 20
List of Tables
Stand-Alone Programming Sections.................................................................. 9
User Parameter Sections................................................................................. 11
Remote Control Button Options....................................................................... 14
RC Button PGM Options.................................................................................. 15
PGM Output Timer........................................................................................... 17
Panic Outputs .................................................................................................. 18
Panic Lockout Timer........................................................................................ 19
List of Figures
Mounting............................................................................................................ 5
Connection with an Esprit Control Panel ........................................................... 6
Stand-Alone Connection.................................................................................... 7
PGM Connections.............................................................................................. 8
Remote Control Button Identification............................................................... 13
MGRCV3ES_EI01.fm Page 0 Wednesday, May 4, 2005 3:27 PM
Magellan Wireless Expansion Module 1
1.0 Introduction
This manual details how to connect, program and operate the Magellan wireless
expansion module (MG-RCV3) when used in conjunction with an Esprit security
system or as a stand-alone system.
When connected to an Esprit security system, the MG-RCV3 functions as an arm/
disarm module, whereby up to eight Magellan remote controls (MG-REM1) can
perform actions such as remote arming and disarming, communicating panic alarms
and activating programmable outputs (PGMs). In stand-alone mode, the remote
controls will only activate the four on-board PGMs.
1.1 Technical Specifications
• Di-pole antenna
• Error Correction Algorithm
• Compatibility Any Magellan wireless transmitter
• Frequency: 433MHz or 868MHz
• Range (line of sight): Remote controls = 100m (300ft)
• Sensitivity: -120 dBm
• Current consumption: 50 mA
• Dimensions (no antenna): 15cm H x 16cm L x 3cm W
(6in H x 6.5in L x 1.1in W)
• Operating temperature: 0°C to 49°C (32°F to 120°F)
• PGM outputs: 4 on-board PGM outputs:
PGM1 and PGM2 - 150mA PGM
transistor outputs
PGM3 - form C relay output rated
at 5A/28Vdc, N.O./N.C. (PGM4
optional)
• Programming keypad: Esprit 636 or 646 LED keypad
MGRCV3ES_EI01.fm Page 1 Wednesday, May 4, 2005 3:27 PM
2 Reference & Installation Manual
Specifications may change without prior notice.
1.2 System Features
• Auto-Panel Recognition
• Supports up to 8 users
• Supports up to 8 Magellan remote controls (MG-REM1)
• 4 on-board programmable outputs (PGMs)
• On-board anti-tamper switch
• Stand-alone operation (trigger PGMs only) or in conjunction with an Esprit
control panel (arm/disarm, panic alarms, PGM activation)
• Programming keypad (636, 646) connects directly to the MG-RCV3
2.0 Installation
The following sections detail how to mount and connect the MG-RCV3.
2.1 Location
The location of the MG-RCV3 affects its performance. In order to ensure the
best possible signal reception, the following list of location criteria should be
respected whenever possible:
• Select an installation site that is free of obstacles that reflect and absorb
radio frequency (RF) signals, as well as interference that may distort signals.
Avoid installation near or in the path of strong RF fields (i.e. neon lights,
computers), on or near metal objects, circuit breaker boxes, air conditioners,
• Approvals: 433MHz
868MH
zCompliant to all EU and EFTA
countries except Greece according
to RTT&E directives.
868MHz version is not UL approved
MGRCV3ES_EI01.fm Page 2 Wednesday, May 4, 2005 3:27 PM
Magellan Wireless Expansion Module 3
and heater ducts since they may cause interference and reduce the module’s
sensitivity
• Select a site that is not susceptible to drastic temperature changes
• Mount the MG-RCV3 as high as possible
• Avoid mounting the MG-RCV3 in the basement as the range of the module is
reduced when mounted below ground level. However, if it is absolutely
necessary to mount the module in the basement, mount the module as high
and as close to the underside of the first floor as possible
• Mount the MG-RCV3 on a wall allowing at least 5cm (2in) around the module
to permit adequate ventilation and heat dissipation
For the maximum allowable distance between the control panel and
the MG-RCV3, refer to Figure 2.2 on page 6.
2.2 Noise Level Test
The MG-RCV3 performs a test on power-up that verifies the noise level in the
surrounding environment. If the environment is too noisy, the module’s RX LED
will illuminate (refer to Figure 2.2 on page 6) and will remain illuminated until
the module is powered up again. In such cases, power down the MG-RCV3,
change its location, and then power up. Repeat this procedure until the
module’s RX LED no longer illuminates. If all possible mounting locations have
been tested and the environment is still too noisy, be aware that the wireless
system may not function properly.
2.3 Connections and Mounting
1. Using a screwdriver, remove the screw on the MG-RCV3’s front cover and
then remove the front cover.
2. Firmly screw the antenna into the connector marked ANT on the MG-RCV3
(refer to Figure 2.1 on page 5).
3. Remove the printed circuit board (PCB) by applying outward pressure to
the mounting clips (refer to Figure 2.1 on page 5) and then lifting the PCB.
4. Using a drill or screwdriver, punch out the four mounting holes on the back
cover (refer to Figure 2.1 on page 5).
5. Align the six orientation holes (refer to Figure 2.1 on page 5) of the PCB
MGRCV3ES_EI01.fm Page 3 Wednesday, May 4, 2005 3:27 PM
4 Reference & Installation Manual
with the six pins on the back cover and snap the PCB into place. If placed
correctly, the antenna will lean directly over the groove in the back cover.
6. Temporarily mount the MG-RCV3 in its proposed location (refer to section
2.1 on page 2) with masking tape or any other temporary adhesive.
7. If connecting the MG-RCV3 to an Esprit control panel, connect the module
to the control panel in a star or daisy chain configuration (refer to Figure 2.2
on page 6). When used as a stand-alone module, connect the module
using an external 12Vdc power supply that is equipped with a backup
battery connector (refer to Figure 2.3 on page 7).
8. Verify the environment noise surrounding the MG-RCV3 (refer to section
2.2 on page 3).
9. Assign the users and/or remote controls, and then program the remote
control buttons (refer to section 4.3 on page 11).
10. Test the location of the MG-RCV3 by performing an action using an
assigned remote control from a typical distance and location.
11. Permanently mount the MG-RCV3.
Do not cut, bend, or alter the antenna. Ensure that the electrical wires
do not cross over the antenna when connected.
MGRCV3ES_EI01.fm Page 4 Wednesday, May 4, 2005 3:27 PM
Magellan Wireless Expansion Module 5
Figure 2.1: Mounting
MGRCV3ES_EI01.fm Page 5 Wednesday, May 4, 2005 3:27 PM
6 Reference & Installation Manual
Figure 2.2: Connection with an Esprit Control Panel
Refer to Figure 2.4 on
page 8 for PGM
connections.
MGRCV3ES_EI01.fm Page 6 Wednesday, May 4, 2005 3:27 PM
Andere Handbücher für MG-RCV3
1
Inhaltsverzeichnis
Andere Paradox Steuereinheit Handbücher
Paradox
Paradox Digiplex Liberator DGP-319 Montageanleitung
Paradox
Paradox ZX82 Bedienungsanleitung
Paradox
Paradox IP150+ Betriebsanleitung
Paradox
Paradox Spectra Digiplex NE APR3-HUB2 Bedienungsanleitung
Paradox
Paradox PGM82 Bedienungsanleitung
Paradox
Paradox MAGELLAN RTX3 V1.5 Bedienungsanleitung
Paradox
Paradox PCS250G Installationsanleitung
Paradox
Paradox TM40 Bedienungsanleitung
Paradox
Paradox IP150 Betriebsanleitung
Paradox
Paradox PCS265 Installationsanleitung
Paradox
Paradox IP150+ Bedienungsanleitung
Paradox
Paradox ZX8 Bedienungsanleitung
Paradox
Paradox RTX3 Bedienungsanleitung
Paradox
Paradox APR3-ZX4 Betriebsanleitung
Paradox
Paradox ZX82 Bedienungsanleitung
Paradox
Paradox PCS300 Bedienungsanleitung
Paradox
Paradox DGP2-ZX4 Bedienungsanleitung
Paradox
Paradox IP100 Bedienungsanleitung
Paradox
Paradox Digiplex EVO ZX8D Bedienungsanleitung
Paradox
Paradox Digiplex EVO PRT3 Installationshandbuch
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
