Paradox K32LCD+ Bedienungsanleitung

Printed in Canada | 02/2019 PARADOX.COM

Technical Specifications

Warranty

Warranty: For complete warranty information on this product, please refer to the Limited Warranty

Statement found on paradox.com. Your use of the Paradox product signifies your acceptance of all

warranty terms and conditions.

© 2019 Paradox Ltd. All rights reserved. Specifications may change without prior notice.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

K32LCD+ Keypad

Quick Install Guide

The K32LCD+ keypad allows you to configure your Paradox system through its

interface.

Installation

1. Using a flathead screwdriver, pry the front housing assembly from the

backplate.

Figure 1: Opening the K32LCD+

Operating Voltage 9 to 16Vdc

Operating Temp. -10 to 55°C (14 to 131°F)

Power Consumption Maximum current - 150mA

Dimensions 15 x 12.6 x 2.7 cm (6 x 4.9 x 1.06 in.)

Weight 230g (8.1 oz)

Humidity 5-93%

Compatibility Compatible with MG5000, MG5050, and Spectra SP series

V2.31 or higher and SP4000, SP65 V4.90 or higher.

Compliance EN50131-3 Grade 2; Environmental Class II

K32LCD+-EI01

2. If using surface mounted cabling, you will need to knock out the plastic tab (#1)

at the top or bottom of the K32LCD+ backplate in order to for the cable to pass

through, refer to Figure 3.

3. Insert needle nose pliers into the appropriate plastic tab and carefully break off.

Figure 2: Surface-mount cabling plastic tab removal

4. Mount the backplate to the wall by securing a M3.5 #6 screw in each of the

dedicated mounting holes and tamper hole while ensuring that the top is up, as

shown in Figure 3. For EN installations, use the designated mounting holes (#3).

Figure 3: K32LCD+ Backplate

5. Connect the 4-wire combus wires to the connector bus, as shown.

Figure 4: Wiring

6. Assemble both items by joining the hooks on the backplate to their respected

slots on the front housing assembly.

7. Secure the front housing to the backplate by snapping it into place.

The installation process is now complete.

Compatibility

The K32LCD+ is compatible with Magellan and Spectra Series control panels only.

Please refer to the Technical Specifications section for more details.

1

2 2

3

1

2

33

3

Cable pass-through

2

EN Wall Tamper

Plastic tab

EN mounting holes

Mounting holes

3

Andere Handbücher für K32LCD+

3

Andere Paradox Sicherheitssystem Handbücher

Paradox

Paradox Digiplex DGP-848 Betriebsanleitung

Paradox

Paradox MG5050 Betriebsanleitung

Paradox

Paradox DGP2-641 Benutzerhandbuch

Paradox

Paradox Paradox Bedienungsanleitung

Paradox

Paradox Spectra SP Series Gebrauchsanweisung

Paradox

Paradox Esprit 748 Express Betriebsanleitung

Paradox

Paradox Digiplex EVO DGP2-640 Bedienungsanleitung

Paradox

Paradox MG5000 Bedienungsanleitung

Paradox

Paradox IP150 Bedienungsanleitung

Paradox

Paradox DGP2-641 Bedienungsanleitung

Paradox

Paradox Esprit 727 Bedienungsanleitung

Paradox

Paradox DGP2-641 Bedienungsanleitung

Paradox

Paradox PGM4 Bedienungsanleitung

Paradox

Paradox Magellan Systems Bedienungsanleitung

Paradox

Paradox Spectra Bedienungsanleitung

Paradox

Paradox SP5500+ Betriebsanleitung

Paradox

Paradox 950 Bedienungsanleitung

Paradox

Paradox Imperial Digiplex Evo Bedienungsanleitung

Paradox

Paradox Esprit 727 Service-Handbuch

Paradox

Paradox ESPRIT 728 ULT Bedienungsanleitung

Paradox

Paradox Magellan MG5050E Bedienungsanleitung

Paradox

Paradox MG5000 Bedienungsanleitung

Paradox

Paradox K07C Bedienungsanleitung

Paradox

Paradox EVOHD+ Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung