Paradyne 7610 SNMP DSU Installationshandbuch

AREA CODE CHANGE

Please note that the area code for

Paradyne Corporation in Largo, Florida

has changed from 813 to 727.

For any Paradyne telephone number that

appears in this manual with an 813 area

code, dial 727 instead.

7610-A2-GN10-20 November 1997

Model 7610 SNMP DSU

Startup Instructions

Document Number 7610-A2-GN10-20

November 1997

Package Checklist

Verify that your package contains the following:

A Model 7610 Single Port SNMP DSU



Startup Instructions

and the

Model 7610 SNMP DSU User’s Guide

Document No. 7610-A2-GB20. The user’s guide is on diskette, and requires

a PC with Microsoft Windows to view or print it.

Power cord with power transformer

Warranty card

RJ48S modular cable for U.S. network access (14)

No DTE cables are provided. Additional cables may need to be ordered.

Using the Adobe Acrobat Reader

The User’s Guide is provided on diskette in Portable Document Format (PDF). It

can be browsed or printed using the Adobe Acrobat Reader. The Reader is

available at no charge at Adobe’s World Wide Web site, http://www.adobe.com.

For best viewing, follow these instructions:

1. Maximize the Adobe Acrobat window so that it occupies the full screen.

2. Use the bookmarks along the left side to move around in the guide, and the

Index to find specific topics.

3. Once you find the topic you wish to read about, use the View menu to select

Page Only and Fit Visible.

4. Use your operating system’s file manager to copy the PDF file to your hard

disk, then use the Acrobat Reader on the file on hard disk. This makes

browsing through the document smoother and faster.

2 7610-A2-GN10-20

November 1997

Cables and Equipment You May Need to Order

If connecting . . . Order a . . .

A VT100-compatible terminal

to the Terminal port Standard straight-through EIA-232 cable with DB25

plug connectors on both ends.

An ASCII terminal or printer or

UNIX Workstation to the

Management port

Standard straight-through EIA-232 cable with DB25

plug connectors on both ends.

A PC to either the:

HManagement port

HTerminal port

Standard straight-through EIA-232 cable with a DB25

plug connector on one end and a DB9 socket

connector on the other end.

An External Modem to either

the:

HManagement port

HTerminal port

Standard crossover EIA-232 cable with DB25 plug

connectors on both ends.

A Router’s AUX port to the

Management port Standard straight-through EIA-232 cable with a DB25

plug connector on one end and a DB25 socket

connector on the other end.

A DTE with a V.35 connector

to the DTE port V.35 cable with an MS34 plug connector on one end

and an MS34 socket connector on the other end.

A LAN to the Management

port via a LAN Adapter Custom converter with a DB25 plug connector on one

end and an 8-pin modular jack on the other end with a

custom 8-conductor cable and LAN adapter.

Contact your sales or service representative to order these cables. For details,

refer to

Cables and Pin Assignments,

Appendix E, in the User’s Guide.

7610-A2-GN10-20 November 1997

Site Preparation

Make sure you have:

A dedicated, grounded ac outlet that is protected by a circuit breaker within

6 feet of the access unit.

A clean, well-lit, and ventilated site that is free from environmental extremes.

One to two feet of clearance for cable connections.

An operable network connection.

An asynchronous terminal or PC with terminal emulation software.

Installing Your DSU

496-15091

RJ48S

Jack

NETWORK

TERMINAL MANAGEMENT

POWER

DTE

Management

Connection

Terminal

Connection

Power

Connection

Network

Connection

DTE

Connection

4 7610-A2-GN10-20

November 1997

Installing the Power Cord

CAUTION:

Use no power supply except the one provided with the DSU. Using the

wrong power supply can destroy the DSU.

"Procedure

1. Insert the power plug into the POWER jack.

2. Plug the power transformer into an ac outlet.

TERMINAL MANAGEMENT NETWORK

POWER

496-15107

Power

Jack

Connecting the Terminal Port to an Async Terminal

"Procedure

1. Insert the 25-pin end of the EIA-232 cable into the TERMINAL port.

2. Insert the other end of the cable into the VT100-compatible terminal.

3. Press Return on the keyboard to display the Main Menu.

TERMINAL MANAGEMENT NETWORK

POWER

496-15109

To Connect to a PC

or Async Terminal

Terminal

Port

7610-A2-GN10-20 November 1997

NOTE:

Factory defaults for communications parameters on the Terminal port are

9.6 kbps, 8 bits per character, one stop bit, and no parity.

Connecting to the Management Port

"Procedure

1. Insert the 25-pin end of the EIA-232 cable into the MANAGEMENT port.

2. Insert the other end of the cable into the management interface connector.

This may be on:

— A LAN adapter

— A UNIX workstation

— An external modem

— A router or server

TERMINAL MANAGEMENT NETWORK

POWER

496-1510

or or

Async Terminal,

SNMP NMS, or PC

LAN

Adapter

External

Modem PSTN

Network

Router or

Terminal

Server

LAN

AUX

Port

UNIX

Workstation

Management

Port

NOTE:

Verifying the connection to a LAN, router, or external modem requires setup

and configuration; see

Startup

, Chapter 3, in the User’s Guide.

6 7610-A2-GN10-20

November 1997

Connecting to a DTE

"Procedure

1. Insert one end of the 34-pin V.35 cable into the DTE port.

2. Insert the other end of the V.35 cable into the DTE connector.

TERMINAL MANAGEMENT NETWORK

POWER

496-15111

DTE

DTE Port

Connecting to the Network

"Procedure

1. Insert the 8-pin connector on the RJ48S network cable into the NETWORK

jack.

2. Insert the other end of the cable into the RJ48S modular jack.

TERMINAL MANAGEMENT NETWORK

POWER

496-15110

RJ48S

Jack

Network

Interface

7610-A2-GN10-20 November 1997

Hardware Verification

Did the OK LED light? If not, refer to

Troubleshooting

in Chapter 8 in the

User’s Guide.

— The ALARM LED will remain lit if the network connection has not been

made. To connect to the network, refer to

Connecting to the Network

. If

the network is connected, refer to

Troubleshooting

in Chapter 8 in the

User’s Guide.

496-15073

NetworkSystem Port

56/64K

CTS (106)

ALARM

TEST

OOS

OOF

TXD (103)

RXD (104)

RTS (105)

DTR (108)

7610 SNMP DSU

Did the Main Menu appear on the asynchronous terminal screen? If not, see

Messages and Troubleshooting

, Chapter 8,

in the User’s Guide.

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

main Access Level: 1

Device Name: Model: 7610

MAIN MENU

Status

Test

Configuration

Control

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions Exit

8 7610-A2-GN10-20

November 1997

Technical Specifications

Table 1. Model 7610 DSU Technical Specifications (1 of 2)

Item Specifications

Housing

Height (including feet)

Height (without feet)

Width

Depth (case)

Depth (case and connectors)

2.13 inches (54.1 mm)

1.99 inches (50.6 mm)

9.10 inches (231.2 mm)

6.20 inches (157.5 mm)

6.51 inches (165.3 mm)

Weight 1.44 pounds (0.65 kg)

Power

Normal service voltage

range Input: 120 Vac +12 Vac, 60 Hz +3 Hz

4.9 watts (max.) at 120 Vac

Approvals

FCC Part 15

FCC Part 68

Safety Certifications

Industry Canada CS-03

Class A digital device

Refer to the equipment’s label for Registration Number.

Refer to the equipment’s label for approvals on product.

Refer to the equipment’s label for Certification Number.

Interface and Connectors

25-pin D-subminiature

connector

34-pin MS34 connector

EIA-232/ ITU V.24 (ISO 2110) for Terminal and

Management Ports

ITU V.35 (ISO 2593) for DTE Port

Physical Environment

Operating Temperature

Storage Temperature

Relative Humidity

Shock and Vibration

32°to 122°F (0°to 50°C)

–4°to 158°F (–20°to 70°C)

5%—95% (noncondensing)

Withstands normal shipping and handling

Heat Dissipation 11.6 Btu/hr. (max.) at 120 Vac

Network Interface

Data rates

LADS data rates

Services supported

56 kbps and 64 kbps clear channel (CC)

56 kbps and 64 kbps

4-wire service

Terminal Port Data Rates 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, and 38.4 kbps

Defaults: 9.6 kbps with 8 bits per character, 1 stop bit,

and no parity

Management Port Data

Rates 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, and 38.4 kbps

7610-A2-GN10-20 November 1997

Table 1. Model 7610 DSU Technical Specifications (2 of 2)

Item Specifications

Network Compatibility

ANSI T1.410–1992 and

AT&T Technical Reference

62310–1993

56 and 64 kbps meeting desired loop loss

IP Connectivity Up to 20 routes

NMS Compatibility SNMP Network Manager

MIB II Object Groups

Supported HICMP group

HInterfaces group:

– DDS network

– DTE Data port

– Terminal port

– Management port

HIP group

HSNMP group

HSystem group

HTCP group

HTransmission group:

– DDS network – DDS Enterprise MIB

– DTE Data port – RS-232-Like MIB

– Terminal port – RS-232-Like MIB

– Management port – RS-232-Like MIB

HUDP group

Table 2. Model 7610 DTE Port Clock Rate

In-Band Management

Line Operating Rate

In-Band Management

Channel (IMC) Rate 56 Kbps 64 Kbps (CC or LADS)

0 (IMC disabled) 56,000 bps 64,000 bps

1,600 bps 54,400 bps 62,400 bps

4,000 bps 52,000 bps 60,000 bps

8,000 bps 48,000 bps 56,000 bps

Andere Handbücher für 7610 SNMP DSU

Inhaltsverzeichnis

Andere Paradyne Touch-Terminal Handbücher

Paradyne

Paradyne FrameSaver SLV 9820-C Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung