Paramount Fitness FS-53 Bedienungsanleitung

FS-53

SSEMBLY

ANUAL

AM-FS53

112014

Thank you for purchasing products from the Paramount FS line. Because of the many unique

features included in these machines, this manual was created to provide you with information on

how to properly install and maintain your equipment. Proper maintenance will ensure that your

new equipment will last for years.

For your convenience, product questions can be answered by an Authorized Paramount Dealer or

by contacting a Paramount Customer Service Representative at:

1-800-721-2121 or 1-323-721-2121

Office hours are Monday-Friday, 7:30 am - 4:30 pm PST

Or email us at nasales@paramountfitness.com

Thank You for your patronage.

Paramount Fitness Corporation

6450 East Bandini Blvd.

Los Angeles, CA 90040

IMPORTANT

SERIOUS INJURIES TO USERS, BYSTANDERS OR INSTALLERS CAN OCCUR IF THE

INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL ARE NOT FOLLOWED. TO

MINIMIZE THIS RISK, READ THE MANUAL BEFORE BEGINNING THE INSTALLATION TO

FAMILIARIZE YOURSELF WITH ITS CONTENTS AND THEN BE CERTAIN TO FOLLOW EACH

OF THE STEPS AND PRACTICES DESCRIBED. IN ADDITION, REVIEW THE GENERAL

MAINTENANCE MANUAL, FACILITY SAFETY SIGN AND OTHER DOCUMENTS THAT MAY

ACCOMPANY EACH MACHINE, FOR IMPORTANT SAFETY AND MAINTENANCE TIPS. THE

MANUAL HAS BEEN INCLUDED WITH YOUR MACHINE ORDER AND CAN ALSO BE

DOWNLOADED FROM OUR WEBSITE AT: http://www.paramountfitness.com

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.

A MESSAGE TO OUR CUSTOMERS

AFETY

...................................................................................................................... 4

ENERAL

ARE

AND

AINTENANCE

........................................................................... 7

IMENSIONS

AND

EIGHT

........................................................................................... 8

REPARATION

............................................................................................................. 9

1 C

ARTON

ONTENTS

............................................................................................ 10

2 C

ARTON

ONTENTS

............................................................................................ 11

NSTALLATION

& A

SSEMBLY

TEP

1: A

SSEMBLE

THE

AIN

RAME

...................................................................... 12

TEP

2: A

SSEMBLE

EIGHT

TACK

& L

TUBE

...................................................... 14

TEP

3:A

SSEMBLE

RONT

HROUD

UBE

, F

OOT

RAME

.................................. 16

TEP

4: A

SSEMBLE

ABLE

& R

UBE

UPPORT

......................................... 19

TEP

5: I

NSTALL

& R

ANDLE

............................................................. 21

TEP

6: I

NSTALL

EAR

HROUD

& T

............................................................ 22

TEP

7 I

NSTALL

THE

EIGHT

TACK

ABEL

............................................................. 24

ACHINE

ABELS

........................................................................................................ 25

ERVICE

..................................................................................................................... 26

OLTING

THE

ACHINE

THE

LOOR

............................................................................ 27

ARRANTY

................................................................................................................. 28

TABLE OFCONTENTS

ACILITY

AND

SER

AFETY

RECAUTIONS

1. Review and understand all of the warning labels affixed to this machine and on the facility

safety sign.

2. Be certain that the machine operation is understood before it is used. Refer to the

instructional Procedure Label affixed to the machine.

3. Make sure all users are properly trained on how to use this equipment. If this machine is

being used in a commercial setting, end users may not have access to this Owners Manual. It

is the responsibility of the facility to instruct users as to the proper usage of the equipment as

well as making them aware of potential hazards. Maximum user weight is 300 lbs (136 kg).

4. Use each machine only for the intended exercise. Do not allow anyone to invent exercises not

included on the Instructional Procedure Label or the Intended Use Label.

5. Do not modify the machine.

6. This equipment meets industry safety standards for stability when used for the intended

exercise. Do not allow straps, resistance bands or other means to be attached to the

framework of this machine to perform stretching or body weight exercises. This can result in

machine instability and lead to serious crushing injuries.

7. Keep children away from this equipment. Adults should closely supervise use by teenagers.

8. It is recommended that users receive a thorough medical exam before commencing an

exercise program. All medical issues should be reviewed to ensure that weight training will

not aggravate pre-existing medical conditions.

9. If the machine appears damaged or inoperable, contact a facility staff member to place an

“OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use Paramount

supplied replacement components to service this machine.

10. Instruct users not to wear loose or dangling clothes or have headphone wires hanging when

using this equipment.

11. Do not attempt to free any jammed assemblies by yourself as this may cause injury.

12. On Plate Loaded and Free Weight machines:

12a. Use of spotter(s). Instruct users to seek the advice of the facility staff as to the

appropriate use of spotters when lifting. More then one spotter may be required

depending upon the amount of weight being lifted.

12b. Instruct users to load weight plates evenly and carefully (one side and then the other)

to avoid tipping equipment and crushing injuries.

12c. If the machine is equipped with safety stops or catches, inspect them and verify their

proper operation before use and make sure they are securely in place before using or

exiting the machine. Be certain members are instructed on how to operate and adjust

all safety mechanisms.

SAFETY

12d. This equipment is designed for standard olympic size weight plates with a 50mm bore

(1.9”).

12e. Do not exceed the maximum weight capacity of the machine. Maximum plate size is

45 lbs. (25 kg.).

13. On Selectorized and Cable equipped machines:

13a. Do not allow users to perform any exercise by holding the end of the cable and/or the

cable end fitting. Use only appropriate handles or attachments properly connected to

the cable end.

13b. Do not high-pin or double-pin the weight stack. Do not allow the machine to be used if

the top plate or weight stack is pinned in a raised position. Use an assistant and

carefully return the machine to the proper position with the cap plate resting on the top

weight. Inspect the entire length of the cable to ensure that it is properly seated in all

of the pulley grooves.

13c. Do not allow the use of weight plates or dumbbells to be used as a means to add

additional weight to the weight stacks. Use only the Paramount adder weight system

specifically designed for the machine.

NSTALLATION

AFETY

RECAUTIONS

1. Read this Installation Manual entirely before assembling this equipment.

2. Verify that there is adequate space surrounding this piece of equipment for safe access and

operation. Installation must meet ADA requirements for accessibility.

3. Install this piece of equipment on a solid level surface that does not deviate more then 1/8”

over a 10’ distance (or as defined and required by local building and architectural codes.

4. Paramount strongly recommends that all equipment be anchored to the floor to prevent

movement and increase stability.

• Due to the wide variation of flooring on which the unit can be installed, contact a

qualified contractor to determine an appropriate fastening system for your floor.

• Use 3/8” diameter hardware (10 mm) to anchor the machine. Anchors should have a

minimum pull out force of 220 lbs (110 kgs) for each position.

• When attaching the machine to the floor, if there is a gap between the machine foot

and the floor, do not use the anchor to remove the gap as this can cause the

machine frame to deform. Instead, place a shim between the bottom of the foot and

the floor, then tighten the anchor.

• Anchoring holes are provided on the feet of the frame. All anchoring locations must

be used when anchoring the equipment to the floor.

5. DO NOT install any fitness equipment near a pool, hot tub or other damp locations. Corrosion

caused by installation in these locations can lead to premature failure of components.

6. Be sure all hardware is tight before using this machine.

SAFETY

AINTENANCE

AFETY

RECAUTIONS

1. Refer to Maintenance Schedule label on the machine as well as this manual for when to

perform maintenance.

2. Check the function of your machine DAILY by verifying the following:

• Inspect cables and end fittings for any signs of wear. Replace if worn, frayed or

damaged with original Paramount replacement components.

• Verify that all adjustments are possible and carried out with ease. Make sure that

each adjustment pin inserts completely into each position without binding.

• Verify that safety catches and stops are in proper working order and engaged.

• Verify that the exercise is performed smoothly, free of noise and/or binding.

• If equipped with a weight stack, verify that the proper weight selector pin is in place.

3. Check the function of your machine WEEKLY by verifying the following:

• Nuts, Bolts, and Fasteners: Check tightness weekly. If any hardware has become

loose, retighten and/or use Loctite

™

Threadlocker 242.

•Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any

component at first signs of wear. Use only Paramount supplied components.

4. Replace any warning label at first sign of wear. Labels and the Facility Safety Sign may be

obtained from Paramount free of charge.

OLT

ENGTH

EASURING

UIDE

SAFETY

FLAT HEAD SCREW

BUTTON HEAD SCREW

HEX HEAD SCREW

SOCKET HEAD SCREW

12345

IMPORTANT

Preventative maintenance is crucial to maintaining the function and safety of this equipment. Your

facility must establish written guidelines for preventative maintenance and keep written or online

records of the maintenance performed on these products. As a minimum, the items presented in

the SAFETY section of this document and the items that follow here, should be included in your

maintenance program.

1. Cables: Inspect end fittings daily for wear. Inspect the entire length of the cable weekly.

Replace cables at the first sign of wear and on an annual basis. If the cable tension has

been adjusted, be certain that the cable nut is tight.

2. Nuts, Bolts, and Fasteners: Check tightness weekly. If any hardware has become loose,

retighten and/or use Loctite

brand Threadlocker 242. Be sure all hardware is tight

before using the machine.

3. Safety Catches: Inspect catches, stop rods and their associated fasteners weekly. Tighten

any loose hardware and replace any components at first signs of wear.

4. Frames: Sweat, disinfecting sprays and spills can lead to corrosion which may lead to

premature failure of components. Wipe all machines down with a damp cloth and dry

completely each day. This includes painted parts, chrome parts and upholstered pads.

5. Painted and chrome plated parts: Use Simple Green or similar cleaner for light dirt and

grime. Use Turtle Wax Polishing Compound or a good car polish to remove heavier dirt

and grease as well as for polishing. DO NOT use solvents, lacquer thinner, acetone or

finger nail polish remover. For scuffs and marks that are not removed by the above

methods use a soft scrub cleanser. Make sure all parts are dry upon completion.

6. Weight stack enclosures (shrouds): Wipe down with a damp cloth as needed.

7. Exercise instruction labels: Clean with soap and water as needed.

8. Guide rods: Wipe all dirt and dust from the guide rods before applying a light application

of Tri-Flow

or other teflon spray lubricant. Spray the Tri-Flow

on a rag and then wipe

the guide rods with the rag. DO NOT use oil lubricants such as WD-40. Caution: Tri-Flow

will stain carpet and clothing.

9. Bronze bushings: Check monthly for signs of wear and replace as needed.

10. Linear Bearing Shafts: Wipe any accumulation of dust or other contaminants from the

shafts on a weekly basis. Apply a thin layer of a Teflon

(PTFE) grease on a weekly basis.

Paramount recommends Magnalube

brand.

11. When replacing any component, use only Paramount supplied parts.

12. Please refer to the General Maintenance Manual (part number: AM-GMM) for other

important safety and maintenance information.

13. Be sure all hardware is tight before using the machine.

Retain these instructions for future reference.

If you have any questions, do not hesitate to contact your Paramount dealer or Paramount Fitness

Corp. at (800)721-2121 or nasales@paramountfitness.com.

GENERAL CARE AND MAINTENANCE

DIMENSIONS AND WEIGHT

[1199]

47-1/4”

[1936]

76-1/4”

[2126]

83-3/4”

EIGHT

TACK

ONFIGURATION

ACHINE

WEIGHT

PPROXIMATE

LOOR

OADING

170 lbs. 454 LBS [206 KG] 53 LBS/FT

[257 KG/M

]

250 lbs. 534 LBS [242 KG] 62 LBS/FT

[303 KG/M

]

ACHINE

EIGHT

AND

LOOR

OADING

“I

” M

ACHINE

IMENSIONS

AXIMUM

SER

EIGHT

300LBS (136KG)

PREPARATION

EQUIRED

OOLS

Ratchet Wrench and Socket:

9/16”

Wrenches: 9/16”

(or an adjustable crescent wrench).

Rubber mallet.

Allen wrenches:

(included with the machine)

Measurement Guide:

SHCS - SOCKET HEAD CAP SCREW

FHCS - FLAT HEAD CAP SCREW

HHCS - HEX HEAD CAP SCREW

BHCS - BUTTON HEAD CAP SCREW

MEASURE BOLT

FROM HERE

12345

Use this table to measure bolts and set collar spacing.

Weight Plate Cartons

Depending upon your order, this machine can be assembled with either a 170 lb. or 250

lb. weight stack. For a 170 lb. weight stack, (4) cartons of 10 lb. plates are required. For a

250 lb. weight stack, (4) cartons of 15 lb. plates are required.

See below for weight stack options/requirements:

10 LB. Weight Plate Box

Part Number: B1602

Comprised of

(4) x 10 lb. Weight Plates

15 LB. Weight Plate Box

Part Number: B1603

Comprised of

(4) x 15lb. Weight Plates

BOX 1 CARTON CONTENTS

ITEM

ART

UMBER

ESCRIPTION

1 FS-CAP-000X TOP CAP 1

2 FS53-SHD-300X FRONT SHROUD 1

3 FS-SHD-350X REAR SHROUD 1

4 FS53-UPR-000X UPRIGHT 1

5 FS53-GRD-300X GUIDE ROD 2

6 FS53-PAD-100X SEAT PAD 1

7 FS-BKT-000 GUIDE ROD BRACKET 2

8 FS-PAD-400X ROLLER PAD, SHORT 2

9 FS-BKT-001 TOP CAP BRACKET 2

10 FS-WSB-000 WEIGHT STACK BASE 2

Andere Handbücher für FS-53

Inhaltsverzeichnis

Andere Paramount Fitness Heim-Fitnessstudio Handbücher

Paramount Fitness

Paramount Fitness FS-22 Bedienungsanleitung

Paramount Fitness

Paramount Fitness PFT-200 Bedienungsanleitung

Paramount Fitness

Paramount Fitness XFT-100 Bedienungsanleitung

Paramount Fitness

Paramount Fitness PFT-200 Bedienungsanleitung

Paramount Fitness

Paramount Fitness MS-1000 Bedienungsanleitung

Paramount Fitness

Paramount Fitness FS-55 Bedienungsanleitung

Paramount Fitness

Paramount Fitness SF-1000 Bedienungsanleitung

Paramount Fitness

Paramount Fitness FS-54 Bedienungsanleitung

Paramount Fitness

Paramount Fitness XFW8200 Bedienungsanleitung

Paramount Fitness

Paramount Fitness XFW8100 Bedienungsanleitung

Paramount Fitness

Paramount Fitness SF-1700 Bedienungsanleitung

Paramount Fitness

Paramount Fitness SF-300 Bedienungsanleitung

Paramount Fitness

Paramount Fitness FS-50 Bedienungsanleitung

Paramount Fitness

Paramount Fitness FS-64 Bedienungsanleitung

Paramount Fitness

Paramount Fitness FS-65 Bedienungsanleitung

Paramount Fitness

Paramount Fitness SF-0700 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung