Paramount Fitness VANTAGE IN-FLOOR CLEANING SYSTEM Bedienungsanleitung

295 East Corporate Pla e • Suite 100 • Chandler, AZ 85225

Toll Free: 1.800.621.5886 • Phone: 480.893.7607 • Fax: 480.753.3397

Paramount@1Paramount. om • www.1Paramount. om

AUTOMATIC IN-FLOOR CLEANING & CIRCULATING SYSTEM

INSTALLATION MANUAL

Notice to Installers:

Read and follow these instru tions. Give these instru tions to the fa ility owner. Follow all odes

and regulations that apply to the design, installation and use of su tion outlet fittings.

U.S. Patent No.: 4,114,206 4,592,379 4,939,797 5,135,579 5,251,343 5,265,631 6,301,723 6,311,728

6,314,999 6,360,767 6,367,098 6,393,629 6,601,244 6,810,537 7,089,607 D,532,684 D,531,888

7,178,179 Other Patents Pending Canada patents 2,028,766

VAN0689 004-027-8720-00 REV040111

MADE IN USA

IMPORTANT NOTICE

The Paramount VANTAGE IN-FLOOR CLEANING SYSTEM is the ulmination of years of extensive testing and

engineering whi h provides your ustomers with the most advan ed and trouble-free system available. The

information ontained in this manual is intended to answer some of the most ommon questions asso iated with

the installation of the System. We urge you to take time to review it thoroughly.

If you have any questions all Toll Free 1.800.621.5886 or visit www.1Paramount. om

The Paramount In-Floor Systems are protecte patente pro ucts an the "metho s an installation" of

sai pro ucts are patente .

An installer of these pro ucts must be traine an license by Paramount. This manual an ocuments

containe within-have been copyrighte an any repro uctions are illegal without the written permission

of Paramount Pool an Spa Systems.

FORWARD

TABLE OF CONTENTS

VANTAGE LAYOUT & DESIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4

DEBRIS DRAIN INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

PRE PLUMBING/VANTAGE FLOOR AND STEP HEAD INSTALLATION . . . . . . . . . . . . . . . .5-8

DEBRIS CANISTER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

NUMBERING THE WATER VALVE PORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

LOCATION OF WATER VALVE & AND PIPE GRADE & SIZE . . . . . . . . . . . . . . . . . . . . . . . .11

2” VALVE BASE PLUMBING GUIDE & GLUING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . .11-13

AUXILIARY EQUIPMENT CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

PUMP INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

START-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

WINTERIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-18

TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-22

BILL OF MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-25

*Only one Skimmer to be used on a

single pump system.

*Heater must have bypass

*No 1-1/2" multiport backwash valves

*Check valve is required on all raised

features using the VANTAGE System.

480.893.7607 fax: 480.893.7621

800.621.5886 cad@1Paramount.com

NOTE:

LOCATION OF CANISTER, SKIMMER AND

SECOND POINT OF SUCTION IS OPTIONAL.

ALL DIMENSIONS ARE BETWEEN FLOOR

COMPONENTS AND ALONG THE PLANE OF

THE FLOOR.

THIS DRAWING IS FOR THE PURPOSE OF IN-FLOOR LAYOUT ONLY

DRAWN BY:

APPROVED BY:

DRAWING

XXX

---

DEBRIS DRAIN MUST BE PLUMBED

WITH A SECONDARY SUCTION

SECONDARY SUCTION

DEBRIS DRAIN

SECONDARY SUCTION

ROTATING NOZZLE

FIXED NOZZLE

DOWNJET

SKIMMER

CANISTER

DEBRIS DRAIN AND SDX MUST BE INSTALLED

IN ACCORDANCE WITH PARAMOUNTS

WRITTEN INSTRUCTION MANUAL, AND IN

CONFORMITY WITH APPLICABLE FEDERAL,

STATE, LOCAL AND SWIMMING POOL

INDUSTRY BUILDING AND SAFETY CODES.

3/8" JET

1/2" JET

3/4" JET

1/4" JET

DEBRIS DRAIN

ROTATING NOZZLES

FIXED NOZZLES

CANISTER

STEP NOZZLES

6-PORT VALVE

9-PORT VALVE

12-PORT VALVE

2-PORT 4-GEAR

DOWN JETS

FIXED

SDX 2-PACKS

AIRPORT

3/8"

1/4"

JET

1/8"

JET

CLEAR 03

-X-

SKIMMER

CANISTER

4 3

PUMP

4.9

SAND

MIN.FILTER

CART.

D.E.

200

HEATER

NOZZLE

FIXED

GPM

CIRCULATION/CLEANING SYSTEM

PUMP G.P.M. @ HD

5870

6 PORT

1-6

WATER FLOW

1STEP

5STEP

13'-4"

8'-7"

10'-5"

14'-2"

7'-4"

12'-6"

7'-3"

1/4

6'-0"

11'-11"

DEBRIS DRAIN MUST BE PLUMBED

WITH A SECONDARY SUCTION

SECONDARY SUCTION

PLUMBING DIAGRAM

VANTAGE VANTAGE PLUS & VANTAGE ULTIMATE:

The Vantage System for pre-formed omposite pools is a spe ialized variation

on the Paramount PCC 2000, whi h is the most advan ed In-Floor Cleaning and Cir ulation system available

for swimming pools in the world today.

The Vantage System offers several levels of leaning, starting with basi floor ir ulation. Options are available to

fully lean the floor, steps, and manage (water urtain) and ontain ( anister) leaf debris.

2 1/2”

Debris Drain

Filter to suit pump

Pump

HIGH HEAD PUMP

Recommended - 250L/M

@20m TDH

Salt

Cholorinator

Debris Drain

Debris Canister

Skimmer Box

Water Valve

Two Way Valve

Fixed Head

Two Way Valves

For More Detail See Main Drain Suction

and Canister Detail Diagram

To Designated

Rotating Heads

2 1/2” Safety Suction

Balance Pipe

Chlorination Safety Loop

(40mm Chlorinator Only)

Dual Pump System

Single Pump System

DEBRIS DRAIN INSTALLATION

System Design:

NOTICE:

WARNING: The rain use must be installe in accor ance with the manufacturers written instruction manual, an

in conformity with applicable Fe eral, State, Local an Swimming pool in ustry buil ing an safety co es.

If you use one of the Paramount ‘Anti-Entrapment Debris Drains’ consult the applicable manual for specific instruc-

tion on how to plumb.

MANUAL PART NUMBERS:

MDX-R3 Fiberglass: 004-027-8825-00

MDX² Fiberglass: 004-027-8791-00

POOL DRAIN SYSTEM

Debris Drain

Plumbed to Optional

Debris Canister

SDX

2 1/2”Safety Suction

teed into main Debris Drain

suction line

Port 2

Port 3

Port 1

Port 5

Port 4

Port 6

Fixed Head

Note:

Fixed head is NOT

plumbed into water valve

Port Sequencing

VANTAGE VANTAGE PLUS & VANTAGE ULTIMATE:

Floor Head Installation

Remove the red construction cap rom

the top o the black body socket.

FIG. 1

Attaching the colored trim ring.

Always install the trim ring irst to ensure

proper alignment o the nozzle to the pool

loor.

FIG. 2

primer & glue

here

Primer the inside o the black body sock-

et built into the pool. Use PVC glue to

glue the lange o the trim ring (Fig 3) into

the top o the black body socket on the

inished side o the pool. Make sure the

trim ring top is lush with the sur ace o

the pool.

A small bead o silicone sealant may also

be used on the top lange to seal the

lange to the pool shell. This will prevent

any weeping leaks between the shell and

the body socket.

FIG. 3

VANTAGE INSTALLATION

FIG 1

FIG 2

FIG 3

Remove the lower red sa ety cap i you

have not already done so.

FIG. 4

FIG 4

BODY INSTALLATION TO SHELL BEFORE SETTING POOL

optional silicone

here

Primer and glue (using a slow drying glue

Weldon IPS 705 or 711) the lange on

the bottom o the loor body supplied in

the kit, working glue into the

recessed chamber on the outside of

the flange so there will be a glue joint

on the outside o the lange and the

inside o the recessed area. Then primer

and glue the outside and inside o the

2 1⁄2” side o the 2 1⁄2” x 2” 90. Push the

body and 90 together making sure that

the top o the 90 bottoms out in the

recess o the outside o the lange on the

body.

FIG. 5

VANTAGE INSTALLATION

Fig 6 shows the glue joint o the 2 1⁄2”

side o the 90 and the lange and

recessed area o the body.

WITH THE 2” OPENING OF THE 90

POINTING TO THE DIRECTION YOU

WANT THE PLUMBING TO GO, primer

and glue the inside o the black body

socket and the outside o the body glued

to the 90 and push it together making

sure that the body bottoms out on

the colored trim ring.

I excess glue squeezes out inside the

body wipe away so not to inter ere with

nozzle installation.

FIG. 6

VANTAGE INSTALLATION

FIG 5

FIG 6

trim excess

glue here

Body and Trim Ring

MUST TOUCH

BODY INSTALLATION TO SHELL BEFORE SETTING POOL (continued)

FIG 7 shows a cross section o the loor

nozzle in the Vantage body with the 2 1⁄2” x

2” 90° ell glued into the body.

NOTE: VANTAGE FLOOR NOZZLES

INSTALL COUNTER CLOCKWISE AND

COME OUT CLOCKWISE.

FIG. 7

Vantage Step Nozzle and Body

Install the step body just like the loor

body except they step body is smaller

and the 90° ell is 2”. A 2” coupler may be

used in place o the 90° ell

NOTE: THE STEP NOZZLE CAP

SHOULD BE PLACED ON THE NOZ-

ZLE SHAFT AND THE BOTTOM OF

THE NOZZLE SET ON A HARD SUR-

FACE. WITH THE PALM OF YOUR

HAND STRIKE THE TOP OF THE CAP

TO SNAP IT IN PLACE. VANTAGE

STEP NOZZLES INSTALL IN THE

REVERSE OF THE FLOOR NOZZLES.

TO INSERT, TURN CLOCKWISE AND

TO REMOVE TURN COUNTER

CLOCKWISE.

FIG. 8

VANTAGE INSTALLATION

FIG 7

FIG 8

BODY INSTALLATION TO SHELL BEFORE SETTING POOL (continued)

INSTALLATION

PRE-PLUMB STEP AND FLOOR NOZZLES UP WALL BEFORE SETTING POOL

FOOTNOTES ON STEP MANIFOLD PLUMBING

When plumbing step manifolds that in lude Ben h nozzles, follow the

pro edure pi tured in luding the ben h nozzles in the manifold. Pla e

the 2” T on the longest se tion of step Manifold for best equalization.

STEP MANIFOLD DETAIL – TYPICAL OF ALL STEP

INSTALLATIONS

Using 2” PVC, onstru t the manifold in a manor that best suits the sit-

uation.

Plumbing the Vantage system while on the delivery trailer (if the driver

an wait) or on the ground before setting, makes the job easier. (if you

must set your pool on the ground, be sure to pla e support blo ks

under it, do not allow the pool to rest on Vantage ports.)

All plumbing is 2” ridgid s hedule 40 PVC. Make sure and keep all

plumbing as lose to the vessel as possible for easy pla ement in your

ex avation.

The Vantage system is a pressure side leaner, be sure to make solid

glue joints.

Extend ea h port riser to the under side of the pool lip, on e you have

set the pool you an ut your pipe to mat h your plumbing dit h.

Grade line

Plumbing

dit h

Pit h

Riser

Port

Inhaltsverzeichnis

Andere Paramount Fitness Schwimmbadreiniger Handbücher

Paramount Fitness

Paramount Fitness RetroJet Bedienungsanleitung

Paramount Fitness

Paramount Fitness MDX Bedienungsanleitung

Paramount Fitness

Paramount Fitness PCC2000 Bedienungsanleitung

Paramount Fitness

Paramount Fitness MDX Bedienungsanleitung

Paramount Fitness

Paramount Fitness PCC2000 Bedienungsanleitung

Paramount Fitness

Paramount Fitness SwingJet Bedienungsanleitung

Beliebte Schwimmbadreiniger Handbücher anderer Marken

CMP

CMP DEL AOP PRO 200 Bedienungsanleitung

GRE

GRE 90397 Bedienungsanleitung

VGE

VGE Blue Lagoon SPA UV-C 12 WATT Bedienungsanleitung

ICHRoboter

ICHRoboter Pool Cleaner Bedienungsanleitung

Pyle

Pyle SereneLife SLPORBT18 Bedienungsanleitung

Steinbach

Steinbach POOLRUNNER 00-61010 Bedienungsanleitung

Aurelaqua

Aurelaqua SWPCLNAURB5WT Bedienungsanleitung

Hayward

Hayward Aquabug Bedienungsanleitung

Hayward Pool Products

Hayward Pool Products MAGIC CLEAN Bedienungsanleitung

Polaris

Polaris 3900 Sport Bedienungsanleitung

Maytronics

Maytronics MCC8-UNI Bedienungsanleitung

GRE

GRE 90399 Bedienungsanleitung

Blue Lagoon

Blue Lagoon UV-C Pro Buster 450.000 l Bedienungsanleitung

fluidra

fluidra Astral Pool Net'N'Clean Bedienungsanleitung

NETSPA

NETSPA RoPool Bedienungsanleitung

Pool Blaster

Pool Blaster iVAC 250 Li Bedienungsanleitung

Intex

Intex 100A Bedienungsanleitung

Davey

Davey Maverick Bedienungsanleitung