Parkside PEPS 3 A1 Bedienungsanleitung

TOURNEVIS ÉLECTRIQUE

DE PRÉCISION

Traduction des instructions d’origine

ELEKTRISCHER PRÄZISIONS-

SCHRAUBENDREHER

Originalbetriebsanleitung

ELECTRICAL PRECISION

SCREWDRIVER

Translation of the original instructions

ELEKTRICKÝ ŠROUBOVÁK

Překlad originálního provozního návodu

ELEKTRISCHE PRECISIE-

SCHROEVENDRAAIER

Vertaling van de originele gebruiksaanwijzing

ELEKTRICKÝ SKRUTKOVAČ

NA JEMNÚ MECHANIKU

Preklad originálneho návodu na obsluhu

ELEKTRYCZNY WKRĘTAK

PRECYZYJNY

Tłumaczenie oryginalnej instrukcji obsługi

DESTORNILLADOR ELÉCTRICO

Traducción del manual de instrucciones original

ELEKTRISK PRÆCISIONS-

SKRUETRÆKKER

Oversættelse af den originale driftsvejledning

CACCIAVITE DI PRECISIONE

ELETTRICO

Traduzione delle istruzioni d’uso originali

ELEKTROMOS PRECÍZIÓS

CSAVARHÚZÓ

Az originál használati utasítás fordítása

ELEKTRIČNI NATANČNI IZVIJAČ

Prevod originalnega navodila za uporabo

ELECTRICAL PRECISION SCREWDRIVER

ELEKTRISCHER PRÄZISIONSSCHRAUBENDREHER

TOURNEVIS ÉLECTRIQUE DE PRÉCISION PEPS 3 A1

ȘURUBELNIŢĂ ELECTRICĂ

DE PRECIZIE

Traducerea instrucţiunilor de utilizare original

ELEKTRIČNI PRECIZNI ODVIJAČ

Prijevod originalnih uputa za uporabu

ЕЛЕКТРИЧЕСКАПРЕЦИЗНА

ОТВЕРТКА

Превод на оригиналното ръководство

за експлоатация

ΗΛΕΚΤΡΙΚΟ ΚΑΤΣΑΒΙΔΙ ΑΚΡΙΒΕΙΑΣ

Μετάφραση των αυθεντικών οδηγιών

λειτουργίας

IAN 423419_2207

GB/ IE Translation of the original instructions Page 1

DE/AT/CH Originalbetriebsanleitung Seite 19

FR/BE Traduction des instructions d’origine Page 39

NL/BE Vertaling van de originele gebruiksaanwijzing Pagina 61

CZ Překlad originálního provozního návodu Strana 79

PL Tłumaczenie oryginalnej instrukcji obsługi Strona 97

SK Preklad originálneho návodu na obsluhu Strana 115

ES Traducción del manual de instrucciones original Página 133

DK Oversættelse af den originale driftsvejledning Side 151

IT Traduzione delle istruzioni d’uso originali Pagina 169

HU Az originál használati utasítás fordítása Oldal 187

SI Prevod originalnega navodila za uporabo Stran 205

HR Prijevod originalnih uputa za uporabu Stranica 221

RO Traducerea instrucţiunilor de utilizare original Pagina 239

BG Превод на оригиналното ръководство

за експлоатация Cтраница 257

GR Μετάφραση των αυθεντικών οδηγιών

λειτουργίας Σελίδα 277

PEPS 3 A1 GB│IE │ 1 ■

Contents

Introduction...................................2

Intended use .........................................2

Features .............................................3

Package contents ......................................3

Technical speciﬁcations .................................3

General power toolsafetywarnings ..............4

1. Work area safety....................................5

2.Electricalsafety.....................................5

3. Personal safety......................................6

4. Power tool use and care ..............................7

5.Service............................................8

Safety instructions for screwdrivers.........................8

Safety instructions for batteries............................8

Before use ....................................9

Removing/inserting batteries .............................9

Inserting bits ..........................................9

Using the appliance ............................9

Switching on/oﬀ.......................................9

Maintenance, storage and cleaning ..............10

Disposal.....................................11

Kompernass Handels GmbH warranty ...........13

Service......................................16

Importer ....................................16

Original declaration of conformity ...............16

PEPS 3 A1■ 2 │ GB│IE

ELECTRICAL PRECISION SCREWDRIVER

PEPS 3 A1

Introduction

Congratulations on the purchase of your new tool. You have selected

a high-quality product. The operating instructions are part of this

product. They contain important information about safety, usage and

disposal. Before using the product, please familiarise yourself with all

operating and safety instructions. Use the product only as described

and for the speciﬁed range of applications. Please also pass these

operating instructions on to any future owner.

Intended use

This electrical precision screwdriver is intended for tightening and

loosening screws during delicate repair work, such as on spectacles,

watches and smartphones.

Use the electrical precision

screwdriver only as described and for the

speciﬁed range of applications.

The electrical precision screwdriver is not intended for commercial/

industrial use. Any other use or modiﬁcation of the appliance is

deemed to be improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for damage attributable

to misuse.

PEPS 3 A1 GB│IE │ 3 ■

Features

1Cap

Electrical precision screwdriver

3Rotation direction switch: left ▼

4Rotation direction switch: right ▲

5LED work light

6Tool holder

7Bits

Package contents

1 electrical precision screwdriver

20 bits PH000/PH0/PH1/PZ0/PZ1/SL1.0/SL2.0/SL3.0/T5/T6/

T8/P2/ P5/P6/H2.5/H3/SQ0/Triangle 3.0/Y2.5/U3.0

2 batteries 1.5 V (DC), LR3, AAA (alkaline TRONIC)

1 operating manual

Technical speciﬁcations

Electrical precision screwdriver

Nominal voltage 3 V (direct current)

Rated idle speed n0160 rpm

Max. torque 0.2 Nm (electrical operation),

3 Nm (hand operation)

Tool holder Suitable for 4 mm bits

For batteries 2 x 1.5 V (DC), LR3,

AAA (alkaline TRONIC)

PEPS 3 A1■ 4 │ GB│IE

Noise and vibration data

The measured values have been determined in accordance with

EN62841. The A-rated noise level of the power tool is typically:

Sound pressure level LpA = 47.4 dB (A)

Sound power level LWA = 58.4 dB (A)

Uncertainty K KpA/WA = 3 dB

Vibration values (vector total of three directions) determined in

accordance with EN 62841:

Screwing: vibration emission value ah< 2.5 m/s2

Uncertainty K = 1.5 m/s2

NOTE

► The vibration emission values and the noise emission values

given in these instructions have been measured in accordance

with a standardised test procedure and can be used for com-

parison of the power tool with another tool.

► The speciﬁed total vibration values and the noise emission

values can also be used to make a provisional load estimate.

General power

toolsafetywarnings

WARNING!

► Read all safety warnings, instructions, illustrations and speci-

ﬁcations provided with this power tool. Failure to follow all

instructions listed below may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

PEPS 3 A1 GB│IE │ 5 ■

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed

(grounded)

power tools.Unmodiﬁed plugs

and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such

as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pull-

ing or unplugging the power tool. Keep cord away from heat,

oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When working outdoors with an electrical power tool always

use extension cords that are also suitable for use outdoors.

Use of a cord suitable for outdoor use reduces the risk of electric

shock.

f) If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use of

an RCD reduces the risk of electric shock.

PEPS 3 A1■ 6 │ GB│IE

3. Personal safety

a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the inﬂuence of drugs, alcohol or medi-

cation. A moment of inattention while operating a power tool

may result in serious personal injury.

b) Use personal protective

equipment. Always wear eye protec-

tion.

Protective equipment such as a dust mask, non-skid safety

shoes, hard hat or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the

oﬀ-position before connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising power tools that have

the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep

your hair and clothing away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-related

hazards.

PEPS 3 A1 GB│IE │ 7 ■

h) Do not allow yourself to get lulled into a false sense of security

and do not ignore the safety regulations for power tools, even

if you are familiar with the power tool after repeated use.

A careless action can cause severe injury within a fraction of a

second.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and

oﬀ. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the

battery pack, if detachable, from the power tool before making

any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children, and do not

allow persons unfamiliar with the power tool or these instruc-

tions to operate the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment

or binding of moving parts, breakage of parts and any other

condition that may aﬀect the power tool’s operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are

easier to control.

Andere Handbücher für PEPS 3 A1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Parkside Elektrowerkzeuge Handbücher

Parkside

Parkside PHET 15 C2 Bedienungsanleitung

Parkside

Parkside 322437 1901 Bedienungsanleitung

Parkside

Parkside PWS 125 A1 Bedienungsanleitung

Parkside

Parkside PMNF 1350 A1 Bedienungsanleitung

Parkside

Parkside PSTDA 20-Li A2 Bedienungsanleitung

Parkside

Parkside PDSS 310 A1 Bedienungsanleitung

Parkside

Parkside 291971 Bedienungsanleitung

Parkside

Parkside PASSK 20-Li A1 Bedienungsanleitung

Parkside

Parkside PDSP 1000 A1 SANDBLASTER GUN Bedienungsanleitung

Parkside

Parkside PKGA 20-Li A1 Bedienungsanleitung

Parkside

Parkside PSTD 800 B1 Bedienungsanleitung

Parkside

Parkside PDNB 6.3 B2 Bedienungsanleitung

Parkside

Parkside PAMFW 12 A1 Bedienungsanleitung

Parkside

Parkside PSTK 730 A1 Bedienungsanleitung

Parkside

Parkside 321231 1901 Bedienungsanleitung

Parkside

Parkside PT370 Bedienungsanleitung

Parkside

Parkside PMNF 1350 B2 Bedienungsanleitung

Parkside

Parkside PMSA 12 A1 Bedienungsanleitung

Parkside

Parkside 334005 1907 Bedienungsanleitung

Parkside

Parkside PSTD 800 A1 Betriebsanleitung

Parkside

Parkside PAH 1300 A1 Bedienungsanleitung

Parkside

Parkside PSTDA 20-LI B3 Bedienungsanleitung

Parkside

Parkside PEH 30 A1 ELECTRIC PLANER Bedienungsanleitung

Parkside

Parkside PHKSA 18-Li B2 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch