Parkside PLP 100 Bedienungsanleitung
PLP 100
LÖTPISTOLE
Bedienungs- und Sicherheitshinweise
LODDEPISTOL
Brugs- og sikkerhedsanvisninger
ΠΙΣΤΟΛΙ ΣΥΓΚΟΛΛΗΣΗΣ
Υποδείξεις χειρισμού και ασφαλείας
SOLDERING GUN
Operation and Safety Notes
GB/IE/CY Operation and Safety Notes Page 5
DK Brugs- og sikkerhedsanvisninger Side 19
GR/CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 33
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 47
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions
of the device.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις
λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
1 2
3
4
5
6
10
7
8
9
5GB/IE/CY
Introduction.....................................................................Page 6
Proper use ..............................................................................Page 7
Description of parts and features.........................................Page 8
Included items........................................................................Page 8
Technical data........................................................................Page 8
Safety advice
1. Workplace safety..............................................................Page 9
2. Electrical safety.................................................................Page 10
3. Personal safety ..................................................................Page 11
4. Careful handling and use of electrical power tools.......Page 12
Original accessories/attachments......................................Page 13
Use
Switching on and off .............................................................Page 13
Replacing a soldering tip......................................................Page 14
Maintenance and cleaning.................................Page 14
Service centre ................................................................Page 14
Warranty ...........................................................................Page 15
Disposal...............................................................................Page 16
Declaration of conformity/Producer........Page 16
Table of contents
6 GB/IE/CY
Introduction
The following pictograms are used in these operating
instructions/on the device:
Read instruction manual!
Observe caution and safety notes!
Caution–electric shock! Danger to life!
Risk of explosion!
Risk of fire!
Warning - Hot surfaces!
V~Volt (AC)
WWatts (Effective power)
Wear a breathing/dust mask, protective glasses,
gloves and clothing.
Keep children away from electrical devices!
For indoor use only!
Check that the device, mains lead and plug are in
good condition!
Do not smoke!
7GB/IE/CY
Introduction
Do not eat!
Do not drink!
Dispose packaging and appliance in an
environmentally-friendly way!
Soldering gun PLP 100
Introduction
Please make sure you familiarise yourself fully with the way
the device works before you use it for the first time and that
you understand how to handle it correctly. Please read the
operating instructions below. Be careful to keep these advice notes
and if necessary pass them on to a third party.
Proper use
The device is intended for soldering tasks in a DIY environment. Soft
soldering takes place at temperatures below 450C°. Suitable solders
have typical melting temperatures around 200C°. Use the device only
as described and for the indicated purposes. The device is not intend-
ed for commercial use. Any other use or modification to the device shall
be considered as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability for loss or damage
arising from improper use.
8 GB/IE/CY
Introduction
Description of parts and features
1Soldering tip
2Union nut
3Soldering light
4ON/OFF switch
5Handle
6Mains lead
7Cutting tip
8Solder wire
9Open spanner
10 Solder flux
Included items
1x Soldering gun
1x Carry case
2x Soldering tips (1 cutting tip 7premounted)
1x Open spanner
20g Solder wire
10g Solder flux
1x Operating instructions
Technical data
Rated voltage: 230V~
Frequency: 50Hz
9GB/IE/CY
Introduction/Safety advice
Power: 100W
Max. soldering tip temperature: 540°C
ON max. 12 sec./OFF min. 48 sec.
Safety advice
CAUTION! Failure to observe the instructions and advice given
below may result in electric shock, fire and/or serious injury.
1. Workplace safety
a) Keep your working area clean and well lit. Untidy or
poorly lit working areas can lead to accidents.
b) Do not work with the device in potentially
explosive environments in which there are
inflammable liquids, gases or dusts. Electrical
power tools create sparks, which can ignite dusts or fumes.
c) Keep children and other people away
while you are operating the electrical tool.
Distractions can cause you to lose control of the device.
10 GB/IE/CY
Safety advice
2. Electrical safety
To avoid danger to life from electric shock:
a)
The mains plug on the device must match
the mains sock-
et. The plug must not be modified in any way. Do not
use an adapter plug with devices fitted with a protec-
tive earth. Unmodified plugs and matching sockets reduce the
risk of electric shock.
b) Keep the device away from rain or moisture. Water
entering an electrical device increases the risk of electric shock.
c) Use a residual current device (RCD) for protection if
operating the electrical power tool in a moist envi-
ronment is unavoidable. The use of an RCD reduces the risk
of electric shock.
d) Do not use the mains lead for any purpose for
which it was not intended, e.g. to carry the
device, to hang up the device or to pull the
mains plug out of the mains socket. Keep the mains
lead away from heat, oil, sharp edges or moving parts
of the device. Damaged or tangled mains leads increase the
risk of electric shock.
e) Do not operate the device if the mains lead or mains plug is
damaged.
WARNING! A damaged mains lead presents a serious
danger to life from electric shock.
f) Always keep the mains lead out of the operating area and run it
away from the rear of the device.
g) Always pull out the mains plug if you are about to leave the device
unattended or wish to carry out any tasks on the device.
11GB/IE/CY
Safety advice
3. Personal safety
a) Children or persons who lack the knowledge or ex-
perience to use the device or whose physical, sensory
or intellectual capacities are limited must never be
allowed to use the device without supervision or in-
struction by a person responsible for their safety.
Children must never be allowed to play with the device.
b) Remain alert at all times, watch what you are doing
and always proceed with caution. Do not use the
device if you are tired or under the influence of
drugs, alcohol or medication. One moment of carelessness
when using the device can lead to serious injury.
Never touch the hot soldering tip or the molten solder.
You could suffer burn injuries. Always let the device cool
before you replace components on the device, clean it
or check its condition.
After use let the soldering gun cool down in air only. Under no cir-
cumstances quench the tip in water!
When allowing the device to cool or when taking a break from
using it, always stand the device up vertically with the soldering tip
at the top.
Keep the device away from combustible materials.
CAUTION! DANGER OF INJURY! Keep your hands away
from the hot workpiece. Avoid contact with the hot soldering tip.
If a dangerous situation arises, pull the mains plug immediately
out of the mains socket.
CAUTION! DANGER OF POISONING! Do not breathe air
contaminated with soldering fumes.
When working with the device for long periods do not
allow the fumes from soldering to build up. They may
be hazardous to health. Always provide adequate
Andere Handbücher für PLP 100
3
Inhaltsverzeichnis
Sprachen:
Andere Parkside Elektrowerkzeuge Handbücher
Parkside
Parkside PMFW 200 Bedienungsanleitung
Parkside
Parkside PDT 40 F4 Bedienungsanleitung
Parkside
Parkside PSTD 800 B1 Bedienungsanleitung
Parkside
Parkside PMFW 280 A1 - 6 Bedienungsanleitung
Parkside
Parkside 104027 Bedienungsanleitung
Parkside
Parkside PDBS 6.2 A1 Bedienungsanleitung
Parkside
Parkside PES 200 B1 Bedienungsanleitung
Parkside
Parkside PAMFW 10.8 A1 Bedienungsanleitung
Parkside
Parkside PSG 50 B2 Betriebsanleitung
Parkside
Parkside PKGA 40-Li A1 Bedienungsanleitung
Parkside
Parkside 96899 Bedienungsanleitung
Parkside
Parkside PHLG 2000 F5 Bedienungsanleitung
Parkside
Parkside POF 1200 A1 Bedienungsanleitung
Parkside
Parkside PLBS 30 Bedienungsanleitung
Parkside
Parkside PLBS 30 B2 Bedienungsanleitung
Parkside
Parkside 311369 1904 Bedienungsanleitung
Parkside
Parkside 331116 1907 Bedienungsanleitung
Parkside
Parkside PMNF 1350 C3 Bedienungsanleitung
Parkside
Parkside PHLG 2000 D3 Bedienungsanleitung
Parkside
Parkside PAHKS 18V Bedienungsanleitung
