Parkside PGG 15 E4 Bedienungsanleitung
ENGRAVING TOOL PGG 15 E4
GRAVIERGERÄT
Originalbetriebsanleitung
IAN 339516_1910
ENGRAVING TOOL
Translation of the original instructions ΗΛΕΚΤΡΙΚΗ ΣΥΣΚΕΥΗ
ΧΆΡΆΞΗΣ
Μετάφραση των αυθεντικών οδηγιών
λειτουργίας
GB/IE/NI/CY Translation of the original instructions Page 1
GR / CY Μετάφραση των αυθεντικών οδηγιών λειτουργίας Σελίδα 19
DE/AT/CH Originalbetriebsanleitung Seite 37
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τις δυο σελίδες με τις εικόνες και
εξοικειωθείτε με όλες τις λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
PGG 15 E4 GB│IE│NI│CY │ 1 ■
Contents
Introduction......................................2
Intended use..............................................2
Features .................................................3
Package contents ..........................................3
Technical data ............................................3
General Power Tool Safety Warnings ................5
1. Work area safety ........................................6
2. Electrical safety .........................................6
3. Personal safety..........................................7
4. Power tool use and care ..................................8
5. Service ................................................9
Operation .......................................9
Switching on and off .......................................9
Setting the stroke depth ....................................10
Changing the engraving tips ................................10
Working procedures.......................................11
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disposal........................................12
Disposal of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Kompernass Handels GmbH warranty ..............13
Service .........................................16
Importer .......................................17
Translation of the original Conformity Declaration .....17
PGG 15 E4
■ 2 │ GB│IE│NI│CY
ENGRAVING TOOL PGG 15 E4
Introduction
Congratulations on the purchase of your new appliance. You have
selected a high-quality product. The operating instructions are part of this
product. They contain important information on safety, usage and dis-
posal. Before using the product, familiarise yourself with all handling and
safety guidelines. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.
Intended use
This appliance is intended for engraving or decorating materials such
as metal, plastic, glass, leather and stone. Any other usage of or
modification to the appliance is deemed to be improper and carries a
significant risk of accidents. The manufacturer accepts no responsibility
for damage(s) attributable to misuse. This appliance is not intended for
commercial use.
PGG 15 E4 GB│IE│NI│CY │ 3 ■
Features
ON/OFF switch
Stroke rate control
Carrying lug
Power cable
Engraving tip
Engraving tip lock
Engraving templates
Package contents
1 engraving tool PGG 15 E4
4 engraving templates
1 set of operating instructions
Technical data
Rated voltage: 230 V ∼, 50 Hz (alternating current)
Operating mode: periodic intermittent operation: S3 20%
Note: A duty cycle (in %) explicitly specifies the maximum continuous use
and the subsequent rest period. In this case, for instance, the tool needs a
cooling period of eight minutes after two minutes of operation.
Rated current: 0.15 A
Stroke rate: 6000 rpm
Approximate weight: 370 g
PGG 15 E4
■ 4 │ GB│IE│NI│CY
Noise emission value
Noise measurement value determined in accordance with EN 60745.
The A-rated noise level of the power tool is typically as follows:
Sound pressure level: LpA = 74.4 dB(A)
Uncertainty: KpA = 3 dB
Sound power level: LWA = 85.4 dB(A)
Uncertainty: KWA = 3 dB
Wear hearing protection!
Total vibration value:
ah= 1.582 m/s2
Uncertainty K = 1.5 m/s2
NOTE
► The vibration level specified in these instructions has been measured
in accordance with the standardised measuring procedure specified
in EN 60745 and can be used to make equipment comparisons.
The specified vibration emission value can also be used to make an
initial exposure estimate.
PGG 15 E4 GB│IE│NI│CY │ 5 ■
WARNING!
► The vibration level varies in accordance with the use of the power
tool and may be higher than the value specified in these instructions
in some cases. Regular use of the electric tool in such a way may
cause the user to underestimate the vibration. Try to keep the vibra-
tion loads as low as possible. Measures to reduce the vibration load
include wearing gloves and limiting your working time. Wherein all
states of operation must be included (e.g. times when the power tool
is switched off and times where the power tool is switched on but
running without load).
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded/mains adapter) power tools or battery-operated (cordless)
power tool.
PGG 15 E4
■ 6 │ GB│IE│NI│CY
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use an extension cord suit-
able for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
PGG 15 E4 GB│IE│NI│CY │ 7 ■
3. Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol or medication. A mo-
ment of inattention while operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
Andere Handbücher für PGG 15 E4
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Parkside Elektrowerkzeuge Handbücher
Parkside
Parkside PEPS 3 A1 Bedienungsanleitung
Parkside
Parkside PMST 100 B2 Bedienungsanleitung
Parkside
Parkside PFBS 12 C5 Bedienungsanleitung
Parkside
Parkside PAH 1300 B2 Bedienungsanleitung
Parkside
Parkside PEC 200 SE Bedienungsanleitung
Parkside
Parkside PBK 4 A1 Bedienungsanleitung
Parkside
Parkside PHLG 2000 B1 Bedienungsanleitung
Parkside
Parkside PSSSA 20-Li B2 Bedienungsanleitung
Parkside
Parkside POF 1200 B2 Bedienungsanleitung
Parkside
Parkside PHKSA 20-Li A1 Bedienungsanleitung
Parkside
Parkside PMST 100 A1 Bedienungsanleitung
Parkside
Parkside PABSW 10.8 B2 Bedienungsanleitung
Parkside
Parkside PDSP 1000 B2 Betriebsanleitung
Parkside
Parkside PDLS 5 A1 Bedienungsanleitung
Parkside
Parkside PUB 500 A1 Bedienungsanleitung
Parkside
Parkside PPHSS 730 SE Kurzanleitung
Parkside
Parkside PHET 15 A1 Bedienungsanleitung
Parkside
Parkside PHG-2000 Bedienungsanleitung
Parkside
Parkside PFBS 12 B3 Bedienungsanleitung
Parkside
Parkside AMFW 20-Li A1 Bedienungsanleitung
