2
Introduction and Warranty
For ease of use, this manual is divided into sections (see
Contents). Each section of the manual is written with you,
the tool operator, in mind. We have left out many of the
technical terms so that you can easily understand how to get
themaximumperformancefromyourCordlessFinishNailer,
and how to avoid damaging the tool or injuring yourself. But,
to accomplish this, we need you to do two things:
1. READ THE MANUAL FROM COVER TO COVER
BEFORE USINGTHETOOL.
2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL.
The Cordless Finish Nailer should be handled like other
power fastening tools that you use. Like most tools, when
used improperly injury could result . If you are going to
allow others to use the Cordless Finish Nailer, it is your
responsibility to make sure that they also read and comply
with the instructions in this manual before attempting to
operate the tool.
Should you have questions about the Cordless Finish
Nailer, or wish to obtain additional copies of this
manual, please contact your Paslode® representative.
The space below is provided so that you may record
your representative's name, address, and telephone
number.
Name
Address
City State Zip
Telephone Number
This manual is intended to acquaint you with the Paslode
thgiartS.ag61sseldroC
Lithium-ion Finish Nailer. Unlike
other power fastening tools, the Cordless Finish Nailer is
powered by an internal combustion linear motor. In simpler
terms, your Cordless Finish Nailer is powered by a motor
similar to the one that powers an automobile. The Cord-
less Finish Nailer ignites a fuel and air mixture to produce
the energy to drive the motor, which in turn drives the
fastener. The Cordless Finish Nailer is totally
self-contained. It carries its own fuel supply and battery,
along with a supply of fasteners.
Paslode Cordless 16 Gauge Straight
Lithium-ion Finish Nailer Operating
Manual
Paslode CordlessWarranty and Limitations
Paslode warranties that new Cordless power fastening tools,
parts and accessories will be free from defects in material and
workmanship for the period shown below, after the date of
delivery to the original user.
ONE-YEAR LIMITED WARRANTY
FIVE-YEAR EXTENDED LIMITED WARRANTY
A five-year warranty will apply to all molded nylon parts:
• Motor Housing,Cap and Grille
• Handle Halves and Actuator
• Trigger
WARRANTY STATEMENT
This warranty is limited to tools sold and service requested in the
United States. To obtain information on warranty service in the
United States, refer to the Service Center listing that was provided
with your tool.
Paslode's sole liability hereunder will be to replace any part or accessory
whichprovestobedefectivewithinthespecifictimeperiod.Anyreplacement
part or accessory provided in accordance with this warranty will carry a
warranty for the balance of the period of warranty applicable to the part
it replaces. This warranty does not apply to part replacement required
due to normal wear.
This warranty is void on any tool which has been subjected to misuse,
abuse, accidental or intentional damage, use with fasteners, fuel,
batteries, or battery chargers not meeting Paslode specification, size, or
quality, improperly maintained, repaired with other than genuine Paslode
replacement parts, damaged in transit or handling, or which, in Paslode's
opinion, has been altered or repaired in a way that affects or detracts from
the performance of the tool.
• Magazine Parts
A one-year warranty will apply to all parts, except those
specifically covered by an extended warranty.
battery and charger system) which have failed during normal
CORDLESS 2 YEAR SERVICE PROMISE
Paslode will service the tool and replace all parts (including
use for FREE, for a period of 2 years from date of purchase.
For 2 Year Service Promise details and limitations see
servicepromise.paslode.com.
PASLODE MAKES NO WARRANTY, EXPRESSED OR IMPLIED,
RELATING TO MERCHANTABILITY, FITNESS, OR OTHERWISE,
EXCEPTAS STATEDABOVE,andPaslode'sliability ASSTATEDABOVE
AND AS ASSUMED ABOVE is in lieu of all other warranties arising out of,
or in connection with, the use and performance of the tool, except to the
extent other wise provided by applicable law. PASLODE SHALL IN NO
EVENT BELIABLE FORANYDIRECT,INDIRECT,ORCONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH
MAY ARISE FROM LOSS OF ANTICIPATED PROFITS OR
PRODUCTION, SPOILAGE OF MATERIALS,, INCREASED COST OF
OPERATION, OR OTHERWISE.
Paslode reserves the right to change specifications, equipment, or designs
at any time without notice and without incurring obligation.
