Basic Operation:
1) Press and hold the Power button (located in the middle of
the camera) for about 2 seconds. You will hear
a chime and the camera will power on. A green indicator light
on top of the camera will turn on, and the camera will turn on
and enter into standby mode. The green LED indicator will
remain on while the device is in standby mode.
3) Press and hold the Power button for about 2 seconds to
power off the device. You will hear a sound and the camera will
turn off. The green indicator light will also turn off.
Transfer & manage files on your computer:
(compatible with Windows XP, Vista, 7, 8 & 10)
1) Drop the camera into the charging station and connect it to
3) Enter your password to sign in (instructions on page 15)
PAGE PAGE
Getting Started Recording
Video Recording:
a. To record a video, press the Record button (located on the
front of the device). The unit will give five audio chirps and
the red indicator LED will turn on, indicating that the camera
is now recording.
b. Press the Record button twice rapidly to stop recording. The
unit will give seven audio chirps. The LED indicator will turn
back to green, and the video will be ended and saved. The
One Touch Recording:
When the unit is powered off, press and hold the record button
for 4 seconds until you hear an audio chirp. The device will turn
on and automatically start video recording.
Photograph Feature:
a. To take photos, press the WiFi/Photo button (located on the
front of the device under the Recording button). The camera
will give three audio chirps and take a photo similar to a
b. To take pictures while video recording, press the Photo
button and the camera will take a picture without
interrupting the video recording.
digital camera.
03/26 04/26
2) The device settings, battery life, storage space, and saved
media files can be viewed and edited via the Camera
Management Software (starting on page 14) or the smartphone
app (starting on page 5). The smartphone app will also allow for
previewing the camera view before and during recordings.
device will now return to standby mode.
to your computer via the included USB cable.
2) Open the “Camera Management Software”.
4) When the camera’s battery is less than 15%, two audio chirps
will sound every two seconds and when the SD card is full the
the red LED will flash only when the record button is pressed
