Patton electronics 2113 Bedienungsanleitung

USER

MANUAL

MODELS 2113 & 2115

CopperLink™-T

T1/E1 Extenders

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M2113-UM

Doc# 03331U2-001,

Rev. B

Revised 8/16/07

An ISO-9001Certiﬁed

Company

Important

—This is a Class A device and is

intended for use in a light industrial environ-

ment. It is not intended nor approved for use

in an industrial or residential environment.

CONTENTS

1.0 Warranty Information ................................................................. 3

1.1 Radio and TV Interference............................................................ 3

1.2 CE Declaration of Conformity....................................................... 3

1.3 Authorized European Representative........................................... 4

1.4 FCC Part 68.................................................................................. 4

1.5 Industry Canada Notice................................................................ 4

1.6 Compliance................................................................................... 6

EMC.............................................................................................. 6

Safety ........................................................................................... 6

PSTN Regulatory.......................................................................... 6

1.7 Service.......................................................................................... 6

Alternate Patton support for Europe, Middle East, and Africa

(EMEA)......................................................................................... 7

1.8 Safety When Working With Electricity .......................................... 7

2.0 General Information.................................................................... 8

2.1 Features........................................................................................ 8

2.2 Description.................................................................................... 8

3.0 Installation................................................................................... 9

3.1 Connecting Power ...................................................................... 10

3.2 Power Input Connector............................................................... 10

External AC universal power supply........................................... 10

3.3 Connecting the Line Port............................................................ 11

3.4 Connecting the Circuit Interface ................................................. 11

4.0 Operation................................................................................... 13

4.1 Front Panel LED Status Monitors............................................... 13

4.2 Configuration and Dip Switches.................................................. 14

Switch S1-7: Line Build Out........................................................ 14

ASpecifications ........................................................................... 15

A.1 Circuit Rates ............................................................................... 15

A.2 Circuit Interface .......................................................................... 15

A.3 Circuit Defaults ........................................................................... 15

A.4 Circuit Connector ....................................................................... 15

A.5 LED Indicators ............................................................................ 15

A.6 Power and Power Supply Specifications ................................... 15

A.7 Environmental ............................................................................. 16

A.8 Transmission Line ....................................................................... 16

A.9 Line Coding ................................................................................ 16

A.10 Line Interface .............................................................................. 16

A.11 Line Physical Connection ........................................................... 16

BFactory Default Dip Switch Configuration.............................. 17

B.1 Switch S1 - Factory Default configuration .................................. 17

B.2 Switch S2 - Factory Default configuration .................................. 17

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 2113 or 2115 components to be

free from defects, and will—at our option—repair or replace the product

should it fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation.If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above.Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following:lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note

Conformity documents of all Patton products can be viewed

online at

www.patton.com

under the appropriate product page.

1.1 RADIO AND TV INTERFERENCE

This equipment generates and uses radio frequency energy, and if not

installed and used properly—that is, in strict accordance with the manu-

facturer's instructions—may cause interference to radio and television

reception.This equipment has been tested and found to comply with the

limits for a Class A computing device in accordance with the speciﬁca-

tions in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection from such interference in a commercial installa-

tion. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment causes interference to radio or

television reception, which can be determined by disconnecting the

cables, try to correct the interference by one or more of the following

measures: moving the computing equipment away from the receiver, re-

orienting the receiving antenna, and/or plugging the receiving equipment

into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.2 CE DECLARATION OF CONFORMITY

We certify that the apparatus identiﬁed in this document conforms to the

requirements of Council Directive 1999/5/EC on the approximation of the

laws of the member states relating to Radio andTelecommunication Ter-

minal Equipment and the mutual recognition of their conformity.

The safety advice in the documentation accompanying this product shall

be obeyed.The conformity to the above directive is indicated by the CE

sign on the device.

1.3 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green, European Compliance Services Limited.

Oakdene House, Oak Road , Watchﬁeld, Swindon, Wilts SN6 8TD, UK

1.4 FCC PART 68

This equipment complies with Part 68 of FCC rules and the requirements

adopted by ACTA. On the bottom side of this equipment is a label that

contains—among other information—a product identiﬁer in the format

US:AAAEQ##TXXXX

.If requested, this number must be provided to the

telephone company.

The method used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules

and requirements adopted by the ACTA.

If this equipment causes harm to the telephone network, the telephone

company will notify you in advance that temporary discontinuance of ser-

vice may be required. But if advance notice isn’t practical, the telephone

company will notify the customer as soon as possible.Also, you will be

advised of your right to ﬁle a complaint with the FCC if you believe it is

necessary.

The telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the equip-

ment.If this happens the telephone company will provide advance notice

in order for you to make necessary modiﬁcations to maintain uninter-

rupted service.

If trouble is experienced with this equipment, for repair or warranty infor-

mation, please contact our company.If the equipment is causing harm to

the telephone network, the telephone company may request that you dis-

connect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the

state public utility commission, public service commission or corporation

commission for information.

1.5 INDUSTRY CANADA NOTICE

This equipment meets the applicable Industry Canada Terminal Equip-

ment Technical Speciﬁcations.This is conﬁrmed by the registration num-

ber.The abbreviation, IC, before the registration number signiﬁes that

registration was performed based on a Declaration of Conformity indicat-

ing that Industry Canada technical speciﬁcations were met.It does not

imply that Industry Canada approved the equipment.

This Declaration of Conformity means that the equipment meets certain

telecommunications network protective, operational and safety require-

ments.The Department does not guarantee the equipment will operate

to the user's satisfaction. Before installing this equipment, users should

ensure that it is permissible to be connected to the facilities of the local

telecommunications company.The equipment must also be installed

using an acceptable method of connection.In some cases, the com-

pany’s inside wiring associated with a single line individual service may

be extended by means of a certiﬁed connector assembly (telephone

extension cord).The customer should be aware that compliance with the

above condition may not prevent degradation of service in some situa-

tions.Repairs to some certiﬁed equipment should be made by an autho-

rized maintenance facility designated by the supplier. Any repairs or

alterations made by the user to this equipment, or equipment malfunc-

tions, may give the telecommunications company cause to request the

user to disconnect the equipment.Users should ensure for their own pro-

tection that the ground connections of the power utility, telephone lines

and internal metallic water pipe system, are connected together.This

protection may be particularly important in rural areas.

1.6 COMPLIANCE

EMC

• FCC Part 15, Class A

• EN55022, Class A

• EN55024

Safety

• UL 60950-1/CSA C22.2 N0.60950-1

• IEC/EN60950-1

• AS/NZS 60950-1

PSTN Regulatory

• FCC Part 68

• CS03

• TBR12 & 13

• AS/ACIF S016:2001

• AS/ACIF S043:2003

1.7 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton Electronics Technical Services at:

• Telephone:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Technical support is available from

8 AM

to 5 PM EST (8:00 to 17:00

UTC-5), Monday through Friday

Note

Packages received without an RMA number will not be

accepted.

Alternate Patton support for Europe, Middle East, and Africa

(EMEA)

• Telephone support: Standard telephone support is available ﬁve days

a week—from

8:00 am

5:00 pm CET

(

0900

1800 UTC/GMT

)—

by calling

+41 (0)31 985 25 55

• Fax:

+41 (0)31 985 25 26

1.8 SAFETY WHEN WORKING WITH ELECTRICITY

• This device contains no user serviceable parts. The

equipment shall be returned to Patton Electronics for

repairs, or repaired by qualiﬁed service personnel.

• The external AC adaptor shall be a listed limited

power source that incorporates a disconnect device and

shall be positioned within easy reach of the operator.

Ensure that the AC power cable meets all applicable

standards for the country in which it is to be installed,

and that it is connected to a wall outlet which has earth

ground.

• Do not work on the system or connect or disconnect

cables during periods of lightning activity.

In accordance with the requirements of council direc-

tive 2002/96/EC on Waste of Electrical and Electronic

Equipment (WEEE), ensure that at end-of-life you sepa-

rate this product from other waste and scrap and deliver

to the WEEE collection system in your country for recy-

cling.

WARNING

2.0 GENERAL INFORMATION

Thank you purchasing this Patton Electronics product.This product has

been thoroughly inspected and tested and is warranted for one year for

parts and labor. If questions arise while installing or using this product,

contact

Technical Support

+1 (301) 975-1007

2.1 FEATURES

• Easy-to-install T1/E1 Extenders—

no conﬁguration required

• Data rates up to 2.048 Mbps in 64-kbps intervals

• Plug‘n’ Play for easy installations

• LED indicators for Power, Ethernet Link, and Frame

• CE marked

2.2 DESCRIPTION

The Patton Electronics Model 2113/2115 CopperLink™-T provides high

speed 2-wireT1/E1 extension connectivity to ISPs, PTTs, and enterprise

environments using binder group friendly TC-PAM modulation.

Line connection is made with an RJ-45 jack.Models 2113 and 2115 are

nally-accessible DIP switches, loopback diagnostics, and CopperLink™-

T Plug ‘n’ Play.

3.0 INSTALLATION

Because the CopperLink-TT1/E1 Extenders require no conﬁguration, they

can be installed quickly.Installation consists of the following:

• Connect the power plug (refer to section 3.1, “Connecting Power” on

page 10).

• Connect the line port (refer to section 3.3, “Connecting the Line Port”

on page 11)

Note

See Figure 1 and Figure 2 for the rear-panel connectors

locations.

• Connect the T1/E1 port (refer to section 3.4, “Connecting the Circuit

Interface” on page 11).

Figure 1.

CopperLink-T Model 2113 rear panel

Figure 2.

CopperLink-T Model 2115 rear panel

Made in the USA

Power

Power Line

Line

Interface

RX (75 Ohm)

(Data from

G.703/G.704

network)

TX (75 Ohm)

(Data to

G.703/G.704

network)

E1 interface

(120 Ohm)

Made in the USA

Power

Power Line

Line

Interface

T1 interface

(RJ-48C)

3.1 CONNECTING POWER

Your CopperLink-TT1/E1 Extender comes with an external AC adaptor

with a detachable power cord.

To connect power to the CopperLink-T:

1. Connect the female plug of the AC power cord to the AC adaptor

provided.

2. Connect the barrel-type connector of the AC adaptor to the Power

connector on the CopperLink-T.

3. Insert the male plug of the AC power cord into the AC power outlet

(100-240 VAC).

4. Verify that the Power LED on the front panel illuminates and remains

lit.

3.2 POWER INPUT CONNECTOR

The CopperLink-T T1/E1 Extender comes with an AC power supply.

• The supplies connection to the CopperLink-T T1/E1 Extender is a

2.5 mm barrel receptacle with the center conductor positive (see

Figure 3).

Figure 3.

Power connection barrel receptacle diagram

• CopperLink-T T1/E1 Extender’s rated voltage: 5.0 VDC

• CopperLink-T T1/E1 Extender’s rated current: 1 A DC

External AC universal power supply

• Output from power supply: 5 VDC, 2A

• Input to power supply: universal input 100–240VAC 50/60 Hz 0.3A

The external AC adaptor shall be a listed limited power

source that incorporates a disconnect device and shall

be positioned within easy reach of the operator. Ensure

that the AC power cable meets all applicable standards

for the country in which it is to be installed, and that it

is connected to a wall outlet which has earth ground.

CAUTION

Andere Handbücher für 2113

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Patton electronics Extender Handbücher

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics EnviroNet Ethernet Extenders Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2172A Bedienungsanleitung

Patton electronics

Patton electronics CopperLink Ethernet Extenders 2158A Bedienungsanleitung

Patton electronics

Patton electronics 1058 Bedienungsanleitung

Patton electronics

Patton electronics COPPER LINK 2174 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 07M2160-GS Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2158B Bedienungsanleitung

Patton electronics

Patton electronics 2173R Bedienungsanleitung

Patton electronics

Patton electronics COPPER LINK 2174 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2156 Bedienungsanleitung

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET EHA2168 Bedienungsanleitung

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Bedienungsanleitung

Patton electronics

Patton electronics CopperLink Ethernet Booster 2110 Bedienungsanleitung

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET EHA2172 Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET 2100 Series Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung