Patton electronics CopperLINK 2172A Bedienungsanleitung

USER

MANUAL

MODEL 2172A

CopperLINK™ High Speed

Ethernet Extender

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M2172A-UM

Rev. A

Revised 4/8/10

An ISO-9001Certiﬁed

Company

This is a Class A device and is intended for use in a

light industrial (commercial) environment only. It

is not intended nor approved for use in a heavy

industrial or residential environment.

CONTENTS

1.0 Warranty Information ................................................................. 4

1.1 Regulatory Information ................................................................. 4

EMC Directive:.............................................................................. 4

Low-Voltage Direcive (Safety):..................................................... 4

1.2 Radio and TV Interference (FCC Part 15) .................................... 4

1.3 CE Declaration of Conformity ....................................................... 5

1.4 Authorized European Representative........................................... 5

1.5 Service.......................................................................................... 5

1.6 Safety When Working With Electricity .......................................... 6

2.0 General Information.................................................................... 8

2.1 Features........................................................................................ 8

2.2 Description.................................................................................... 8

3.0 Installation................................................................................... 9

3.1 Connecting the Twisted-Pair Line Interface................................ 10

3.2 Connecting the 10/100Base-T Ethernet Interface ...................... 11

3.3 Connecting Power ...................................................................... 12

4.0 Configuration ............................................................................ 12

4.1 Configuring the hardware DIP switches...................................... 12

4.2 Configuring DIP Switch S1 ......................................................... 14

5.0 Operation................................................................................... 14

5.1 Power Up .................................................................................... 14

5.2 Front Panel LED Status Monitors ............................................... 15

ASpecifications ........................................................................... 16

A.1 LAN Connection .......................................................................... 16

A.2 Transmission Line ....................................................................... 16

A.3 CopperLINK Line Rate and CopperLINK Distance .................... 16

A.4 LED Status Indicators ................................................................. 16

A.5 Power Supply .............................................................................. 16

A.6 Temperature Range .................................................................... 16

A.7 Humidity ...................................................................................... 16

A.8 Dimensions ................................................................................. 16

BModel 2172A Series Factory

Replacement Parts and Accessories...................................... 17

CModel 2172A Series Interface Pin Assignment...................... 18

C.1 10/100Base-T Interface .............................................................. 18

RJ-45.......................................................................................... 18

C.2 CopperLINK Interface ................................................................. 18

RJ-45.......................................................................................... 18

DDistance Chart, Based on 24 AWG (0.5 MM).......................... 19

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 2172A components to be free

from defects, and will—at our option—repair or replace the product

should it fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following: lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note

Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 REGULATORY INFORMATION

EMC Directive:

• FCC Part 15, Class A

• EN55022, Class A

• EN55024

Low-Voltage Direcive (Safety):

• UL60950-1/CSA C22.2 No. 60950-1

• IEC/EN60950-1 2nd Edition

• AS/NZS 60950-1

• A-tick

1.2 RADIO AND TV INTERFERENCE (FCC PART 15)

This device generates and uses radio frequency energy, and if not

installed and used properly-that is, in strict accordance with the manufac-

turer's instructions-may cause interference to radio and television recep-

tion.The device has been tested and found to comply with the limits for a

Class A computing device in accordance with speciﬁcations in Subpart B

of Part 15 of FCC rules, which are designed to provide reasonable pro-

tection from such interference in a commercial installation. However,

there is no guarantee that interference will not occur in a particular instal-

lation. If the device does cause interference to radio or television recep-

tion, which can be determined by disconnecting the unit, the user is

encouraged to try to correct the interference by one or more of the follow-

ing measures: moving the computing equipment away from the receiver,

re-orienting the receiving antenna and/or plugging the receiving equip-

ment into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

This device conforms to the requirements of Council Directive

2004/108/EC on the approximation of the laws of the member states

relating to electromagnetic compatibility; and Council Directive

2006/95/EC on the approximation of the laws of the member states relat-

ing to electrical equipment designed for use within certain voltage limits.

The safety advice in the documentation accompanying this device shall

be obeyed.The conformity to the above directive is indicated by CE mark

on the device.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon,

Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container. This

number may be obtained from Patton Electronics Technical Services at:

•Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

1.6 SAFETY WHEN WORKING WITH ELECTRICITY

• This device contains no user serviceable parts. This

device can only be repaired by qualiﬁed service person-

nel.

• Do not open the device when the power cord is con-

nected. For systems without a power switch and without

an external power adapter, line voltages are present

within the device when the power cord is connected.

• For devices with an external power adapter, the power

adapter shall be a listed Limited Power Source. The

mains outlet that is utilized to power the device shall be

within 10 feet (3 meters) of the device, shall be easily

accessible, and protected by a circuit breaker in com-

pliance with local regulatory requirements.

• For AC powered devices, ensure that the power cable

used meets all applicable standards for the country in

which it is to be installed.

• For AC powered devices which have 3 conductor

power plugs (L1, L2 & GND or Hot, Neutral &

Safety/Protective Ground), the wall outlet (or socket)

must have an earth ground.

• For DC powered devices, ensure that the interconnect-

ing cables are rated for proper voltage, current, antici-

pated temperature, ﬂammability, and mechanical

serviceability.

• WAN, LAN & PSTN ports (connections) may have haz-

ardous voltages present regardless of whether the

device is powered ON or OFF. PSTN relates to inter-

faces such as telephone lines, FXS, FXO, DSL, xDSL,

T1, E1, ISDN, Voice, etc. These are known as “hazard-

ous network voltages” and to avoid electric shock use

caution when working near these ports. When discon-

necting cables for these ports, detach the far end con-

nection ﬁrst.

• Do not work on the device or connect or disconnect

cables during periods of lightning activity.

WARNING

In accordance with the requirements of council direc-

tive 2002/96/EC on Waste of Electrical and Electronic

Equipment (WEEE), ensure that at end-of-life you sepa-

rate this product from other waste and scrap and deliver

to the WEEE collection system in your country for recy-

cling.

This device is NOT intended nor approved for connec-

tion to the PSTN. It is intended only for connection to

customer premise equipment.

Electrostatic Discharge (ESD) can damage equipment

and impair electrical circuitry. It occurs when electronic

printed circuit cards are improperly handled and can

result in complete or intermittent failures. Do the fol-

lowing to prevent ESD:

• Always follow ESD prevention procedures when

removing and replacing cards.

• Wear an ESD-preventive wrist strap, ensuring that it

makes good skin contact. Connect the clip to an

unpainted surface of the chassis frame to safely chan-

nel unwanted ESD voltages to ground.

• To properly guard against ESD damage and shocks,

the wrist strap and cord must operate effectively. If no

wrist strap is available, ground yourself by touching the

metal part of the chassis.

WARNING

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Variable rate CopperLINK extender - Easy to conﬁgure

• Auto-MDIX Ethernet

• Conﬁgurable 10/100, Full/Half, and Auto-Negotiating Ethernet

• Extends network connections up to 4,250 ft (1.3 km) over 2-wire 24-

AWG unconditioned lines

• Switch selectable line rates up to 50 Mbps (symmetrical)

• Symmetric or asymmetric settings via DIP switch

• Transparent operation

• LED indicators for Power, Link, Ethernet Link & Activity, and Remote/Local

2.2 DESCRIPTION

The Patton Electronics Model 2172A CopperLink modems provide high-

speed LAN connections between peered Ethernet LANs, remote PC’s, or

any other network enabled 10/100Base-T device.

Operating in pairs, one Model 2172A is conﬁgured as the (L) Local unit

located at one end of the LAN extension and the other Model 2172A is

conﬁgured as the (R) Remote unit at the other end. The Model 2172A is

conﬁgured as a L or R via the switch on the bottom of the unit.These units

can automatically forward LAN broadcasts, multicasts, and frames across

a 2-wire voice-grade twisted-pair link.The data is passed transparently

(unmodiﬁed) through the 2172As.The 2172As automatically add and

delete MAC addresses, only passing packets across the CopperLINK link

that are meant for the remote peered LAN.

Figure 1.

Typical application

The pair of 2172A models work together to create a transparent extension

between two peered Ethernet LANs. Figure 1 shows a typical point-to-

point application.

3.0 INSTALLATION

To install the 2172A Ethernet Extender, do the following:

1. Connect the line interface between the units (refer to section 3.1,

“Connecting the Twisted-Pair Line Interface” on page 10)

Note

See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.2, “Connecting the

10/100Base-T Ethernet Interface” on page 11).

3. Connect the power plug (refer to section 3.3, “Connecting Power” on

page 12).

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, ﬂammability, and mechanical serviceability.

CAUTION

Figure 2.

Model 2172A standalone rear panel

3.1 CONNECTING THE TWISTED-PAIR LINE INTERFACE

The Model 2172A supports communication between two peer Ethernet

LAN sites over a distance of up to 4,250 ft (1.3 km) over 24 AWG

(0.5 mm) twisted-pair wire.

Note

Actual distance and link performance may vary depending on

the environment and type/gauge of wire used.

Follow the steps below to connect the Model 2172A CopperLINK Inter-

faces.

Note

The Model 2172A units work in pairs. One of the units must be

conﬁgured as a (L) Local unit, and the other unit must be conﬁg-

ured as a (R) Remote unit. It does not matter which end is the L

and which is the R. The link is always initiated by the R unit. As

long as the L unit is powered on, the R unit can establish a link

by being powered on or by having its power reset.

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, ﬂammability, and mechanical serviceability.

Line

Power

Madein theUSA

Ethernet

Power

jack

Dual 10/100

Ethernet ports

CopperLINK

twisted-pair

RJ-45 interface

CAUTION

Inhaltsverzeichnis

Andere Patton electronics Extender Handbücher

Patton electronics

Patton electronics COPPERLINK 2151 Bedienungsanleitung

Patton electronics

Patton electronics 1068 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET EHA2168 Bedienungsanleitung

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2168 Bedienungsanleitung

Patton electronics

Patton electronics SmartNode 2290 Series Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 07M2160-GS Bedienungsanleitung

Patton electronics

Patton electronics SmartNode 2294 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2172R Bedienungsanleitung

Patton electronics

Patton electronics COPPERLINK 2150 Bedienungsanleitung

Patton electronics

Patton electronics 2113 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink Ethernet Extenders 2158A Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2158B Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2168B Bedienungsanleitung

Patton electronics

Patton electronics COPPER LINK 2174 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics EnviroNet Ethernet Extenders Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2172 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung