Patton electronics CopperLink 2158 Bedienungsanleitung

USER

MANUAL

MODEL 2158

CopperLink Ethernet

Extender

Part# 07M2158-B

Doc# 058092UB

Revised 6/7/02

An ISO-9001Certiﬁed

Company

CONTENTS

1.0 Warranty Information ................................................................. 3

1.1 Radio and TV Interference............................................................ 3

1.2 CE Notice...................................................................................... 3

1.3 Industry Canada Notice................................................................ 4

1.4 Service.......................................................................................... 4

2.0 General Information.................................................................... 5

2.1 Features........................................................................................ 5

2.2 Description.................................................................................... 5

3.0 Installation................................................................................... 7

3.1 Standalone unit installation........................................................... 7

3.2 Rack card installation.................................................................... 7

3.3 Connecting the Twisted-Pair Line Interface.................................. 9

3.4 Connecting the 10/100Base-T Ethernet Interface ...................... 10

Connecting the 10/100Base-T Ethernet Port to a Hub............... 10

Connecting the 10/100Base-T Ethernet Port to a PC (DTE)...... 11

3.5 Connecting Power ...................................................................... 11

4.0 Operation................................................................................... 12

4.1 Power Up.................................................................................... 12

4.2 Front Panel LED Status Monitors............................................... 12

A Specifications ........................................................................... 14

A.1 LAN Connection .......................................................................... 14

A.2 Transmission Line ....................................................................... 14

A.3 CopperLink Line Rate ................................................................. 14

A.4 Actual Data Rate ......................................................................... 14

A.5 CopperLink Distance .................................................................. 14

A.6 CopperLink Surge Suppressor ................................................... 14

A.7 LED Status Indicators ................................................................. 14

A.8 Power Supply .............................................................................. 14

A.9 Temperature Range .................................................................... 14

A.10 Humidity ...................................................................................... 14

A.11 Dimensions ................................................................................. 14

B Model 2158 Series Factory

Replacement Parts and Accessories...................................... 15

C Model 2158 Series Interface Pin Assignment ........................ 16

C.1 10/100Base-T Interface .............................................................. 16

RJ-45.......................................................................................... 16

C.2 CopperLink Interface .................................................................. 16

RJ-45.......................................................................................... 16

Terminal Block............................................................................ 16

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 2158 components to be free from

defects, and will—at our option—repair or replace the product should it

fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following:lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note

Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 RADIO AND TV INTERFERENCE

The Model 2158 generates and uses radio frequency energy, and if not

installed and used properly-that is, in strict accordance with the manufac-

turer’s instructions-may cause interference to radio and television recep-

tion.The Model 2158 has been tested and found to comply with the limits

for a Class A computing device in accordance with speciﬁcations in Sub-

part B of Part 15 of FCC rules, which are designed to provide reasonable

protection from such interference in a commercial installation. However,

there is no guarantee that interference will not occur in a particular instal-

lation. If the Model 2158 does cause interference to radio or television

reception, which can be determined by disconnecting the unit, the user is

encouraged to try to correct the interference by one or more of the follow-

ing measures: moving the computing equipment away from the receiver,

re-orienting the receiving antenna and/or plugging the receiving equip-

ment into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is

in compliance with the Electromagnetic Compatibility (EMC) directive

and the Low Voltage Directive (LVD) of the European Union (EU). A Cer-

tiﬁcate of Compliance is available by contacting Technical Support.

1.3 INDUSTRY CANADA NOTICE

NOTICE:This equipment meets the applicable Industry CanadaTerminal

Equipment Technical Speciﬁcations.This is conﬁrmed by the registration

number.The abbreviation, IC, before the registration number signiﬁes

that registration was performed based on a Declaration of conformity

indicating that Industry Canada technical speciﬁcations were met.It does

not imply that Industry Canada approved the equipment.

1.4 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton ElectronicsTechnical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Easy to install standalone CopperLink Ethernet Extenders—

no conﬁg-

uration required

• Auto-sensing full or half-duplex Ethernet

• Auto-sensing 10/100Base-T

• Extends network connections up to 4,652 ft (1,418 m) over 2-wire 24-

AWG unconditioned lines

• 12.5 Mbps symmetric line rate; 10 Mbps data rate

• Transparent operation

• LED indicators for Power, Ethernet Link & Activity, CopperLink connection &

Quality of Line (QOL)

• Surge suppression up to 20 kA (8/20

• Available in rack-mount or standalone conﬁgurations

• Made in the USA

2.2 DESCRIPTION

The Patton Electronics Model 2158/L and 2158/R Ethernet Extenders

provide high-speed LAN connections between peered Ethernet LANs,

remote PC’s, or any other network enabled 10/100Base-T device.

Operating in pairs, a Model 2158/L (local) located at one end of the LAN

extension and a Model 2158/R (remote) at the other end, these units can

automatically forward LAN broadcasts, multicasts, and frames across a 2-

wire voice-grade twisted-pair link.The data is passed transparently

(unmodiﬁed) through the 2158s.The 2158s automatically add and delete

MAC addresses, only passing packets across the CopperLink line that are

meant for the remote peered LAN.

Figure 1.

Typical application

The 2158/L and 2158/R work together to create a transparent extension

between two peered Ethernet LANs.Figure 1 shows a typical point-to-

point application.

3.0 INSTALLATION

Because the Model 2158 requires no conﬁguration, it can be installed

quickly.If you are installing a standalone unit, refer to section 3.1 “Standal-

one unit installation”.Otherwise, refer to section 3.2 “Rack card installation”.

3.1 STANDALONE UNIT INSTALLATION

Do the following:

1. Connect the line interface between the units (refer to section 3.3,

“Connecting the Twisted-Pair Line Interface” on page 9)

Note

See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.4,“Connecting the

10/100Base-T Ethernet Interface” on page 10).

3. Connect the power plug (refer to section 3.5, “Connecting Power”on

page 11).

Figure 2.

Model 2158 standalone rear panel

3.2 RACK CARD INSTALLATION

The Model 2158 rack card version comprises a front card and a rear

card. Do the following to install the cards into the rack chassis:

1. Slide the rear card into the back of the chassis along the metal rails.

2. Secure the rear card using the supplied metal screws.

Ethernet CopperLink Power

Made in the USA

Ethernet

port

CopperLink twisted-pair

terminal block

interface

CopperLink

twisted-pair

RJ-45 interface

3. Slide the front card into the chassis until you feel resistance as the

front card engages the rear card.When that happens,

gently

push

the front card forward until it is fully seated in the card-edge recepta-

cle of the rear card (it should

click

into place).

4. Secure the front card using the captive fasteners.

Note

The Model 1001R14 chassis supports “hot swapping” of cards,

so it is not necessary to power down the rack when you install or

remove a Model 2158 rack card.

Figure 3.

Model 2158 rack cards

5. Connect the line interface between the units (refer to section 3.3,

“Connecting the Twisted-Pair Line Interface” on page 9)

Note

See Figure 3 for the rack card’s panel arrangements.

6. Connect the Ethernet interface (refer to section 3.4,“Connecting the

10/100Base-T Ethernet Interface” on page 10).

CopperLink

RJ-45 interface

CopperLink

terminal block

CopperLink

Ethernet

Port

Ethernet

3.3 CONNECTING THE TWISTED-PAIR LINE INTERFACE

The Model 2158 supports communication between two peer Ethernet

LAN sites over a distance of up to 4,652 ft (1,418 m) over 24 AWG (0.5

mm) twisted-pair wire.

Note

Actual distance and link performance may vary depending on

the environment and type/gauge of wire used.

Follow the steps below to connect the Model 2158 CopperLink Inter-

faces.

Note

The Model 2158 units work in pairs.One of the units must be a

Model 2158/L (Local), and the other unit must be a Model 2158/

R (Remote).The link is always initiated by the 2158/R. As long

as the 2158/L is powered on, the 2158/R can establish a link by

being powered on or by having its power reset.

1. To function properly, the two Model 2158s must be connected

together using twisted-pair, unconditioned, dry, metal wire, between

19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through

signal equalization equipment are not acceptable.

2. The Model 2158 is equipped with two interface jacks that can be used

on the CopperLink interface, an RJ-45 or a terminal block.These

CopperLink interfaces are a two-wire interface.Observe the signal/pin

relationships on the Model 2158's CopperLink interface jacks.

The RJ-45 connector on the Model 2158's twisted pair interface is polar-

ity insensitive and is wired for a two-wire interface.The signal/pin rela-

tionship is shown in Figure 4.

Figure 4.

Model 2158 (RJ-45) twisted pair line interface.

The terminal block connector on the Model 2158's twisted pair interface

is polarity insensitive and is wired for a two-wire interface.The signal/pin

relationships is shown in Figure 5.

1 (no connection)

2 (no connection)

3 (no connection)

4 (2-Wire RING)

5 (2-Wire TIP)

6 (no connection)

7 (no connection)

8 (no connection)

Figure 5.

Model 2158 (Terminal Block) twisted pair line interface.

3.4 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE

The shielded RJ-45 port labeled

Ethernet

is the 10/100Base-T interface.

This port is designed to connect directly to a 10/100Base-T network.

Figure 6 shows the signal/pin relationships on this interface.You may

connect this port to another Ethernet device via a Type 4 or Type 5 cable

that is up to 328 ft long.

Figure 6.

Model 2158 10/100Base-T RJ-45 Connector Pinout.

Connecting the 10/100Base-T Ethernet Port to a Hub

The Model 2158 10/100Base-T interface is conﬁgured as DTE (Data Ter-

minal Equipment), just like a 10/100Base-T network interface card in a

PC.Therefore, it “expects” to connect to a 10/100Base-T Hub using a

Ethernet CopperLink Power

Made in the USA

RING TIP

1 TX+ (data output from 2158)

2 TX- (data output from 2158)

3 RX+ (data input to 2158)

4 (no connection)

5 (no connection)

6 RX- (data input to 2158)

7 (no connection)

8 (no connection)

Andere Handbücher für CopperLink 2158

Inhaltsverzeichnis

Andere Patton electronics Extender Handbücher

Patton electronics

Patton electronics COPPER LINK 2174 Bedienungsanleitung

Patton electronics

Patton electronics 2173R Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET EHA2172 Bedienungsanleitung

Patton electronics

Patton electronics COPPERLINK 2150 Bedienungsanleitung

Patton electronics

Patton electronics COPPERLINK 2151 Bedienungsanleitung

Patton electronics

Patton electronics SmartNode 2290 Series Bedienungsanleitung

Patton electronics

Patton electronics SmartNode 2294 Bedienungsanleitung

Patton electronics

Patton electronics 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2173 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink Ethernet Extenders 2158A Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics EnviroNet Ethernet Extenders Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2168B Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2156 Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2172 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2172A Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics 1173R Bedienungsanleitung

Patton electronics

Patton electronics 1068 Bedienungsanleitung

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2173 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung