Patton electronics CopperLINK 2172 Bedienungsanleitung

USER

MANUAL

MODEL 2172

CopperLINK™ High Speed

Ethernet Extenders

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M2172-UM

Doc# 03333U2-001

Rev. B

Revised 12/4/08

An ISO-9001Certiﬁed

Company

This is a Class A device and is intended for use in a

light industrial environment. It is not intended nor

approved for use in an industrial or residential

environment.

CONTENTS

1.0 Warranty Information ................................................................. 4

1.1 Compliance................................................................................... 4

EMC Compliance:......................................................................... 4

Safety Compliance: ...................................................................... 4

1.2 Radio and TV Interference (FCC Part 15) .................................... 4

1.3 CE Declaration of Conformity ....................................................... 5

1.4 Authorized European Representative........................................... 5

1.5 Service.......................................................................................... 5

1.6 Safety When Working With Electricity .......................................... 6

2.0 General Information.................................................................... 7

2.1 Features........................................................................................ 7

2.2 Description.................................................................................... 7

3.0 Installation................................................................................... 8

3.1 Connecting the Twisted-Pair Line Interface.................................. 9

3.2 Connecting the 10/100Base-T Ethernet Interface ...................... 11

3.3 Connecting Power ...................................................................... 12

4.0 Configuration ............................................................................ 12

4.1 Configuring the hardware DIP switches...................................... 12

4.2 Configuring DIP Switch S2 ......................................................... 14

Switch S2-1: Symmetric/Asymmetric Operation......................... 14

Switches S2-2 and S2-3: Data Rate........................................... 14

5.0 Operation................................................................................... 16

5.1 Power Up .................................................................................... 16

5.2 Front Panel LED Status Monitors ............................................... 17

ASpecifications ........................................................................... 18

A.1 LAN Connection .......................................................................... 18

A.2 Transmission Line ....................................................................... 18

A.3 CopperLINK Line Rate and CopperLINK Distance .................... 18

A.4 CopperLINK Surge Suppressor .................................................. 18

A.5 LED Status Indicators ................................................................. 18

A.6 Power Supply .............................................................................. 18

A.7 Temperature Range .................................................................... 18

A.8 Humidity ...................................................................................... 18

A.9 Dimensions ................................................................................. 18

BModel 2172 Series Factory

Replacement Parts and Accessories...................................... 19

CModel 2172 Series Interface Pin Assignment ........................ 20

C.1 10/100Base-T Interface .............................................................. 20

RJ-45.......................................................................................... 20

C.2 CopperLINK Interface ................................................................. 20

RJ-45.......................................................................................... 20

Terminal Block............................................................................ 20

DDistance Chart, Based on 24 AWG (0.5 MM).......................... 21

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 2172 components to be free from

defects, and will—at our option—repair or replace the product should it

fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following: lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note

Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 COMPLIANCE

EMC Compliance:

• FCC Part 15, Class A

• EN55022, Class A

• EN55024

Safety Compliance:

• IEC/EN 60950-1

• AS/NZS 60950-1

1.2 RADIO AND TV INTERFERENCE (FCC PART 15)

This equipment generates and uses radio frequency energy, and if not

installed and used properly—that is, in strict accordance with the manu-

facturer's instructions—may cause interference to radio and television

reception. This equipment has been tested and found to comply with the

limits for a Class A computing device in accordance with the speciﬁca-

tions in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection from such interference in a commercial installa-

tion. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment causes interference to radio or

television reception, which can be determined by disconnecting the

cables, try to correct the interference by one or more of the following

measures: moving the computing equipment away from the receiver, re-

orienting the receiving antenna, and/or plugging the receiving equipment

into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

We certify that the apparatus described above conforms to the require-

ments of Council Directive 2004/108/EC on the approximation of the

laws of the member states relating to electromagnetic compatibility; and

Council Directive 2006/95/EC on the approximation of the laws of the

member states relating to electrical equipment designed for use within

certain voltage limits.

The safety advice in the documentation accompanying this product shall

be obeyed. The conformity to the above directive is indicated by the CE

sign on the device.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon,

Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container. This

number may be obtained from Patton Electronics Technical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

1.6 SAFETY WHEN WORKING WITH ELECTRICITY

• This device contains no user serviceable parts. The

equipment shall be returned to Patton Electronics for

repairs, or repaired by qualiﬁed service personnel.

• Mains Voltage: Ensure that the external power adapter

is a listed Limited Power Source. The mains outlet that

is utilized to power the devise shall be within 10 feet (3

meters) of the device, shall be easily accessible, and

protected by a circuit breaker. Ensure that the power

cable used meets all applicable standards for the coun-

try in which it is to be installed, and that it is connected

to a wall outlet which has earth ground.

• Hazardous network voltages are present in WAN ports

regardless of whether power to the unit is ON or OFF. To

avoid electric shock, use caution when near WAN ports.

When detaching the cables, detach the end away from

the device ﬁrst.

• Do not work on the system or connect or disconnect

cables during periods of lightning activity.

In accordance with the requirements of council direc-

tive 2002/96/EC on Waste of Electrical and Electronic

Equipment (WEEE), ensure that at end-of-life you sepa-

rate this product from other waste and scrap and deliver

to the WEEE collection system in your country for recy-

cling.

This device is NOT intended nor approved for connec-

tion to the PSTN. It is intended only for connection to

customer premise equipment.

WARNING

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Variable rate CopperLINK extender - Easy to conﬁgure

• Auto-MDIX Ethernet

• Conﬁgurable 10/100, Full/Half, and Auto-Negotiating Ethernet

• Extends network connections up to 6,000 ft (1.8 km) over 2-wire 24-

AWG unconditioned lines

• Switch selectable line rates up to 50 Mbps

• 6 symmetric or asymmetric settings via DIP switch

• Transparent operation

• LED indicators for Power, Link, and Ethernet Link & Activity

• Surge suppression up to 20 kA (8/20

• Made in the USA

2.2 DESCRIPTION

The Patton Electronics Model 2172 CopperLink modems provide high-

speed LAN connections between peered Ethernet LANs, remote PC’s, or

any other network enabled 10/100Base-T device.

Operating in pairs, one Model 2172 is conﬁgured as the (L) Local unit

located at one end of the LAN extension and the other Model 2172 is con-

ﬁgured as the (R) Remote unit at the other end. The Model 2172 is conﬁg-

ured as a L or R via the switch on the rear panel. These units can

automatically forward LAN broadcasts, multicasts, and frames across a 2-

wire voice-grade twisted-pair link.The data is passed transparently

(unmodiﬁed) through the 2172s.The 2172s automatically add and delete

MAC addresses, only passing packets across the CopperLINK link that are

meant for the remote peered LAN.

Figure 1.

Typical application

The pair of 2172 models work together to create a transparent extension

between two peered Ethernet LANs. Figure 1 shows a typical point-to-

point application.

3.0 INSTALLATION

To install the 2172 Ethernet Extender, do the following:

1. Connect the line interface between the units (refer to section 3.1,

“Connecting the Twisted-Pair Line Interface” on page 9)

Note

See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.2, “Connecting the

10/100Base-T Ethernet Interface” on page 11).

3. Connect the power plug (refer to section 3.3, “Connecting Power” on

page 12).

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, ﬂammability, and mechanical serviceability.

CAUTION

Figure 2.

Model 2172 standalone rear panel

3.1 CONNECTING THE TWISTED-PAIR LINE INTERFACE

The Model 2172 supports communication between two peer Ethernet

LAN sites over a distance of up to 6,000 ft (1.8 km) over 24 AWG

(0.5 mm) twisted-pair wire.

Note

Actual distance and link performance may vary depending on

the environment and type/gauge of wire used.

Follow the steps below to connect the Model 2172 CopperLINK Inter-

faces.

Note

The Model 2172 units work in pairs. One of the units must be

conﬁgured as a (L) Local unit, and the other unit must be conﬁg-

ured as a (R) Remote unit. It does not matter which end is the L

and which is the R. The link is always initiated by the R unit. As

long as the L unit is powered on, the R unit can establish a link

by being powered on or by having its power reset.

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, ﬂammability, and mechanical serviceability.

Line

Power

Madein theUSA

Power

Madein theUSA

Ethernet

2172

(RJ-45)

2172

(Terminal block)

Power

jack

Power

jack

Ethernet

port

Ethernet

port

RemLoc

Local/Remote

switch

Local/Remote

switch

RemLoc

CopperLINK twisted-pair

RJ-45 interface

CopperLINK twisted-pair

terminal block

interface

CAUTION

1. To function properly, the two Model 2172s must be connected

together using twisted-pair, unconditioned, dry, metal wire, between

19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through

signal equalization equipment are not acceptable.

2. The Model 2172 is equipped with either an RJ-45 or a terminal block

interface jack that can be used on the CopperLINK interface. These

CopperLINK interfaces are a two-wire interface. Observe the sig-

nal/pin relationships on the Model 2172's CopperLINK interface jacks.

The RJ-45 connector on the Model 2172's twisted pair interface is polar-

ity insensitive and is wired for a two-wire interface. The signal/pin rela-

tionship is shown in Figure 3.

Figure 3.

Model 2172 (RJ-45) twisted pair line interface.

The terminal block connector on the Model 2172's twisted pair interface

is polarity insensitive and is wired for a two-wire interface. The signal/pin

relationships is shown in Figure 4.

1 (no connection)

2 (no connection)

3 (no connection)

4 (RING)

5 (TIP)

6 (no connection)

7 (no connection)

8 (no connection)

Inhaltsverzeichnis

Andere Patton electronics Extender Handbücher

Patton electronics

Patton electronics COPPER LINK 2174 Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2172A Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2158B Bedienungsanleitung

Patton electronics

Patton electronics 2173R Bedienungsanleitung

Patton electronics

Patton electronics 2173R Bedienungsanleitung

Patton electronics

Patton electronics 1068 Bedienungsanleitung

Patton electronics

Patton electronics EnviroNet Ethernet Extenders Bedienungsanleitung

Patton electronics

Patton electronics CopperLink Ethernet Booster 2110 Bedienungsanleitung

Patton electronics

Patton electronics 1058 Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2173 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics EnviroNET 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics 2156 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 07M2160-GS Bedienungsanleitung

Patton electronics

Patton electronics SmartNode 2294 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2160 Series Bedienungsanleitung

Patton electronics

Patton electronics 2100 Series Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics COPPERLINK 2150 Bedienungsanleitung

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Bedienungsanleitung

Patton electronics

Patton electronics CopperLINK 2173 Bedienungsanleitung

Patton electronics

Patton electronics CopperLink 2158 Bedienungsanleitung

Patton electronics

Patton electronics 1173R Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung