Patton electronics RocketLink-G 3088 Series Bedienungsanleitung

USER

MANUAL

MODEL 3088

RocketLink-G NTU

G.SHDSL Modem

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M3088-UM

Doc# 03325U2-001 Rev. A

Revised 5/20/05

An ISO-9001

Certiﬁed Company

CERTIFIED

CONTENTS

1.0 Compliance Information............................................................. 4

1.1 Radio and TV Interference............................................................ 4

1.2 FCC Part 68 (ACTA) Statement ................................................... 4

1.3 Industry Canada Notice................................................................ 5

1.4 CE Notice...................................................................................... 5

2.0 Warranty Information ................................................................. 6

2.1 Service.......................................................................................... 6

3.0 General Information.................................................................... 7

3.1 Features........................................................................................ 7

3.2 Description.................................................................................... 7

4.0 Configuration .............................................................................. 8

4.1 Configuring the DIP Switches..................................................... 11

4.2 System Reset Mode ................................................................... 12

Software Upgrades..................................................................... 12

Configuration Reset to Factory Defaults..................................... 13

4.3 DIP Switch Settings.................................................................... 13

S1-8: TX Clock ........................................................................... 14

S1-7 – S1-1: Data Rate.............................................................. 14

Loops.......................................................................................... 16

S2-5 – S2-4: Clock Mode ........................................................... 16

S2-3: Annex A/B......................................................................... 17

S2-2: Line Probe......................................................................... 17

S2-1: Front Panel Switches........................................................ 17

3.4 Console ................................................................................ 17

Help Commands......................................................................... 20

System Configuration Commands.............................................. 20

System Status Commands......................................................... 21

DSL Configuration Commands................................................... 22

DSL Status Commands.............................................................. 23

Remote Console......................................................................... 25

Example Command Line Interface Session ............................... 25

4.4 RocketLink Plug ‘n’ Play............................................................. 26

5.0 Installation................................................................................. 28

5.1 Connecting the Twisted Pair Interface........................................ 28

5.2 Connecting the Model 3088/CA (V.35) Serial Interface.............. 29

Connecting the Model 3088/CA (V.35) to a “DTE” Device......... 29

Connecting the Model 3088/CA (V.35) to a “DCE” Device......... 30

5.3 Connecting the Model 3088/D (X.21) Serial Interface................ 30

Connecting the Model 3088/D (X.21) to a “DCE”

or “DTE” Device.......................................................................... 30

Opening the Case....................................................................... 31

5.4 Connecting Power ...................................................................... 32

6.0 Operation................................................................................... 33

6.1 Power-up .................................................................................... 33

6.2 LED Status Monitors................................................................... 33

Power (Green)............................................................................ 33

DSL (Green)............................................................................... 33

Term (Green).............................................................................. 34

TM/ER (Red) .............................................................................. 34

6.3 Test Modes................................................................................. 34

Loopbacks.................................................................................. 34

Patterns...................................................................................... 35

7.0 Remote Console Manual Information ..................................... 36

7.1 Establishing a Remote Console Session.................................... 36

How to Connect.......................................................................... 36

How to Disconnect...................................................................... 38

Differences in Local and Remote Control Session Behavior...... 39

8.0 Model 3088 Software Upgrade Feature................................... 41

9.0 Reset Configuration to Factory Defaults................................ 42

A Specifications ........................................................................... 43

A.1 Clocking Modes .......................................................................... 43

A.2 DTE Rate ..................................................................................... 43

A.3 Serial Interface ............................................................................ 43

A.4 Serial Connector ......................................................................... 43

A.5 Diagnostics ................................................................................. 43

A.6 Status LEDs ................................................................................ 43

Power (Green)............................................................................ 43

DSL (Green)............................................................................... 43

Term (Green).............................................................................. 44

TM/ER (Red) .............................................................................. 44

A.7 Configuration .............................................................................. 44

A.8 Power .......................................................................................... 44

A.9 Compliance ................................................................................. 44

A.10 Transmission Line ....................................................................... 44

A.11 Line Coding ................................................................................ 44

A.12 Line Rates (DSL line) .................................................................. 44

A.13 Line Interface .............................................................................. 45

A.14 G.SHDSL Physical Connection ................................................... 45

A.15 Environment ................................................................................ 45

B Factory Replacement Parts and Accessories........................ 46

C Model 1088/CA Interface Pin Assignments............................ 47

D Model 3088/D Interface Pin Assignments............................... 48

1.0 COMPLIANCE INFORMATION

1.1 RADIO AND TV INTERFERENCE

The equipment generates and uses radio frequency energy, and if not

installed and used properly-that is, in strict accordance with the manufac-

turer's instructions-may cause interference to radio and television recep-

tion.The equipment has been tested and found to comply with the limits

for a Class A computing device in accordance with the speciﬁcations in

Subpart B of Part 15 of FCC rules, which are designed to provide rea-

sonable protection from such interference in a commercial installation.

However, there is no guarantee that interference will not occur in a partic-

ular installation. If the equipment causes interference to radio or televi-

sion reception, which can be determined by disconnecting the cables, try

to correct the interference by one or more of the following measures:

moving the computing equipment away from the receiver, re-orienting

the receiving antenna, and/or plugging the receiving equipment into a

different AC outlet (such that the computing equipment and receiver are

on different branches).

1.2 FCC PART 68 (ACTA) STATEMENT

This equipment complies with Part 68 of FCC rules and the requirements

adopted by ACTA. ON the bottom side of this equipment is a label that

contains-among other information-a product identiﬁer in the format US:

AAAEQ##TXXXX. If requested, this number must be provided to the

telephone company.

The method used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules

and requirements adopted by the ACTA.

If this equipment causes harm to the telephone network, the telephone

company will notify you in advance that temporary discontinuance of ser-

vice may be required. But if advance notice isn't practical, the telephone

company will notify the customer as soon as possible. Also, you will be

advised of your right to ﬁle a complaint with the FCC if you believe it is

necessary.

The telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the equip-

ment.If this happens the telephone company will provide advance notice

in order for you to make necessary modiﬁcations to maintain uninter-

rupted service.

If trouble is experienced with this equipment, for repair or warranty infor-

mation, please contact our company.If the equipment is causing harm to

the telephone network, the telephone company may request that you dis-

connect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the

state public utility commission, public service commission or corporation

commission for information.

1.3 INDUSTRY CANADA NOTICE

This equipment meets the applicable Industry Canada Terminal Equip-

ment Technical Speciﬁcations.This is conﬁrmed by the registration num-

ber.The abbreviation, IC, before the registration number signiﬁes that

registration was performed based on a Declaration of Conformity indicat-

ing that Industry Canada technical speciﬁcations were met.It does not

imply that Industry Canada approved the equipment.

This Declaration of Conformity means that the equipment meets certain

telecommunications network protective, operational and safety require-

ments.The Department does not guarantee the equipment will operate

to the user's satisfaction. Before installing this equipment, users should

ensure that it is permissible to be connected to the facilities of the local

telecommunications company.The equipment must also be installed

using an acceptable method of connection.In some cases, the com-

pany's inside wiring associated with a single line individual service may

be extended by means of a certiﬁed connector assembly (telephone

extension cord).The customer should be aware that compliance with the

above condition may not prevent degradation of service in some situa-

tions.Repairs to some certiﬁed equipment should be made by an autho-

rized maintenance facility designated by the supplier. Any repairs or

alterations made by the user to this equipment, or equipment malfunc-

tions, may give the telecommunications company cause to request the

user to disconnect the equipment.Users should ensure for their own pro-

tection that the ground connections of the power utility, telephone lines

and internal metallic water pipe system, are connected together.This

protection may be particularly important in rural areas.

1.4 CE NOTICE

This equipment conforms to the requirements of Council Directive 1999/

5/EC on the approximation of the laws of the member states relating to

Radio and Telecommunication Terminal Equipment and the mutual rec-

ognition of their conformity.

2.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 3088 components to be free from

defects, and will—at our option—repair or replace the product should it

fail within one year from the ﬁrst date of shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not perform as warranted, your sole recourse shall

be repair or replacement as described above.Under no condition shall

Patton Electronics be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following:lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product. Patton Electronics speciﬁ-

cally disclaims all other warranties, expressed or implied, and the instal-

lation or use of this product shall be deemed an acceptance of these

terms by the user

Note

Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

2.1 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton Electronics Technical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not

be accepted.

Note

The Model 3088 is ﬂash upgradeable. Please refer to Patton

website, or contact Technical Support for the latest version of

the software.

3.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.This

product has been thoroughly inspected and tested and is warranted for

OneYear parts and labor. If any questions or problems arise during

installation or use of this product, please do not hesitate to contact Pat-

ton Electronics Technical Support at

+1 (301) 975-1007

3.1 FEATURES

• Symmetrical high data rate DSL (G.SHDSL)

• Data rates up to 4.6Mbps in 64-kbps intervals

• Serial V.35 (DCE only) or X.21 (selectable DCE or DTE) interface

• RS232 console port for management and conﬁguration

• Built-in testing and diagnostics

• RocketLink Plug ‘n’ Play for easy installations

• Interoperable with other Patton G.SHDSL modems

• Universal power options

• Front panel status indicators

• CE marked

3.2 DESCRIPTION

The Patton Electronics Model 3088 G.SHDSL RocketLink provides high

speed 2-wire connectivity to ISPs, PTTs, and corporations using Sym-

metrical High data rate Digital Subscriber Line (G.SHDSL) Technology.

The Model 3088/CA provides a V.35 interface on a DB-25 female con-

nector. Model 3088/D provides and X.21 interface on a DB-15 female

connector.Features include Loopback diagnostics, SNMP/HTTP remote

management capabilities using RocketLink Plug ‘n’ Play and inband

externally accessible conﬁguration switches.

As a symmetric DSL NTU, RocketLink DSL offers the same data rates in

both directions over a single pair of regular twisted pair lines using TC-

PAM modulation. Line connection is made with an RJ-45 jack.Standard

versions of Model 3088 are powered by an 100/230 VAC

(Universal) supply.

4.0 CONFIGURATION

The Model 3088 (see ﬁgure 1) has two conﬁguration modes, DIP switch

and software.

Figure 1.

Model 3088 (3088/D version shown)

DIP switch conﬁguration mode is entered by starting the unit with the DIP

switches in any position other than all OFF or all ON.In DIP switch conﬁgu-

ration mode, the DIP switch settings are read at system startup and used to

conﬁgure the unit.Once the unit has started in DIP switch mode it will

remain in DIP switch mode, and its settings cannot be changed.Console

commands used to conﬁgure the unit will report that the unit is in DIP switch

conﬁguration and will not change the conﬁguration.Likewise, EOC variables

cannot be used to conﬁgure the device.Also note that changing the DIP

switch settings while the unit is running will have no effect on the conﬁgura-

tion as the DIP switches are only read on startup.

Software conﬁguration mode is entered by starting the unit with the DIP

switches set to all ON.The system then reads any conﬁguration that might

have been saved to FLASH.If no conﬁguration has been saved, then the

factory defaults are loaded.The unit may be further conﬁgured by console

commands or by EOC.

The Model 3088 provides the following parameters for conﬁguring

the unit.

Parameter Description Possible

Values Default

Value

Password The password used to login

to the console. Character

strings 1–9

characters

long.

patton

Circuit ID The circuit ID used to identify

the unit. Character

string1–64

characters

long.

Patton

Model

3088

FrontPanel

Switches If the unit is populated with

front panel switches, they can

be used to start and stop test

modes.If they are disabled,

however, the front panel

switch settings will be

ignored.

Enabled or

Disabled Enabled

DTE Loops The V.35 interface can

request LALs and RDLs

using its RRDL and RLAL

pins.If DTE loops are dis-

abled, requests for loopbacks

on these pins will be ignored.

Enabled or

Disabled Enabled

TX Clock The serial TX data can be

sampled on either the falling

edge (normal) or rising edge

(inverted) of the TX clock.

Normal or

Inverted Normal

Timeslots The number of DSL timeslots.

Thiscontrols both theDSL and

the serial data rate.The data

rate is calculated by the equa-

tion:data rate = #timeslots x

64k

1–72 4

Clock

Mode Controls DSL and serial clock

sources.Internal clock mode

means the 3088 provides its

own clock to both the serial

interface and the DSL link.

External clock mode means

the serial interface provides

the clock used for the DSL

link. Receive recover clock

mode means the DSL link

provides the clock to the

serial interface.

Internal,

External,

or Receive

Recover

Receive

Recover

Annex The G.991.2 Annex. A or B B

Line Probe A proprietary method to set

the DSL data rate to the best

rate that both units can sup-

port. Used for rate adaptive

applications.This can only be

used for data rates of 3–36

timeslots.

Enabled or

Disabled Disabled

Loopback The 3088 provides both a

local loopback (LAL) and a

remote loopback (RDL).This

can be used to troubleshoot

problems.

OFF, LAL,

or RDL OFF

Pattern The 3088 provides an inter-

nal PRBS pattern generator

and detector that can be

used to run BER tests without

external equipment.The pat-

terns offered are 511 and 511

with errors.

OFF, 511,

or 511E OFF

DSL Error

Monitor

Maximum

Intervals

The number of errors allowed

in an interval before consider-

ing the interval errored. A

value of 0 disables the error

monitor.

0–255 3

DSL Error

Monitor

Interval

Time

The length, in seconds, of

an interval. 1–255 1

Parameter Description Possible

Values Default

Value

Andere Handbücher für RocketLink-G 3088 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Patton electronics Modem Handbücher

Patton electronics

Patton electronics 1110 Bedienungsanleitung

Patton electronics

Patton electronics 1206P Bedienungsanleitung

Patton electronics

Patton electronics 2703RC Bedienungsanleitung

Patton electronics

Patton electronics 1004 Bedienungsanleitung

Patton electronics

Patton electronics DIAMONDLINK 3201 Bedienungsanleitung

Patton electronics

Patton electronics NetLink 1082 Bedienungsanleitung

Patton electronics

Patton electronics 1089/I Bedienungsanleitung

Patton electronics

Patton electronics 1006 Bedienungsanleitung

Patton electronics

Patton electronics 1082/F Bedienungsanleitung

Patton electronics

Patton electronics 1005 Bedienungsanleitung

Patton electronics

Patton electronics 3010 Bedienungsanleitung

Patton electronics

Patton electronics 1180 Bedienungsanleitung

Patton electronics

Patton electronics 1186 Bedienungsanleitung

Patton electronics

Patton electronics 12168 Bedienungsanleitung

Patton electronics

Patton electronics 2190 Bedienungsanleitung

Patton electronics

Patton electronics Model 1065 Bedienungsanleitung

Patton electronics

Patton electronics 1093 Bedienungsanleitung

Patton electronics

Patton electronics ParaLink 1225 Bedienungsanleitung

Patton electronics

Patton electronics 1004A Bedienungsanleitung

Patton electronics

Patton electronics 3012/V24, 3014/V24, 3018/V24 Bedienungsanleitung

Patton electronics

Patton electronics 1194 Bedienungsanleitung

Patton electronics

Patton electronics 1070RC Bedienungsanleitung

Patton electronics

Patton electronics 1000R Bedienungsanleitung

Patton electronics

Patton electronics 1025 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung