Patton electronics 1195/8E1 Bedienungsanleitung

Optical Multiplexer

Quick Start Guide

Part Number: 07M1195-QS, Rev. A

Revised: February 12, 2009

SalesOfﬁce:+1(301)975-1000

Technical Support: +1 (301) 975-1007

E-mail:[email protected]

WWW:www.patton.com

Model 1195/8E1

Model1195/8E1QuickStartGuide

• This device contains no user serviceable parts. The equipment shall be

returned to Patton Electronics for repairs, or repaired by qualiﬁed

service personnel.

• Mains Voltage: Line voltages are present when the power cord is con-

nected. The mains outlet shall be within 10 feet (3 meters) of the

device, shall be easily accessible, and protected by a circuit breaker.

• For AC powered units, ensure that the power cable used meets all

applicable standards for the country in which it is to be installed, and

that it is connected to a wall outlet which has earth ground.

• Hazardous network voltages are present in WAN ports, regardless of

whether power to the unit is ON or OFF. To avoid electric shock, use

caution when near WAN ports. When detaching the cables, detach the

end away from the unit ﬁrst.

• Do not work on the system or connect or disconnect cables during

periods of lightning activity.

• For units with an external power adapter, the adapter shall be a

listed Limited Power Source.

WARNING

Model1195/8E1QuickStartGuide

1.0 Connecting power

AC Mains version:

PleaseusetheACmaincable(provided)toconnectthesystemtoyourACmainspower

outlet.

DC Mains version

:PleaseconnecttheDCmainscable(provided)tothesystem.Thepolarityshouldnotbe

reversedwhileconnecting.Otherwise, you can get your system damaged.

1.1 AC Power

ToconnecttheAC220Vpower:

1.2 DC Power

ToconnecttheDC-48V:

DC 48 V

E1 4-1

~ 220 V

PGND GND -48V

OPTICAL B

TX RX

OPTICAL A

TX RX

RS232

CONSOLE

DC Power

Cable

E1 8-5

From AC Source

(220V)

DC 48 V

E1 4-1

~ 220 V

PGND GND -48V

OPTICAL B

TX RX

OPTICAL A

TX RX

RS232

CONSOLE

IEC 60320

Female

IEC 60320

Male on Unit

E1 8-5

Model1195/8E1QuickStartGuide

1.3 Grounding

WhentheequipmentisusedwiththeAC~220Vpowersupply,the3-coresocketmustbegroundedforprotec-

tion.Theotherequipment,e.g.opticalterminal,connectedwiththisequipmentmustalsobegrounded

ToconnecttheEarth:

2.0 Connecting the optical interface

Note

Donotexposetothenakedeye.ConnectﬁbercabletosystemwhenpowerisOFF.

Note

ForTesting:

ALWAYS INSTALL OPTICAL ATTENUATORS. For distances of less than 10 km, optical attenuators

must be installed on the Optical Links. Otherwise, the optics will be permanently damaged.

Model1195/8E1QuickStartGuide

3.0 Connecting the DB-37 connector

DC 48 V

E1 4-1

~ 220 V

PGND GND -48V

OPTICAL B

TX RX

OPTICAL A

TX RX

RS232

CONSOLE

DB-37 (Female)

Connector

118

19 37

RJ-45 (F)

Connector

RJ-45 (F)

Connector

RJ-45 (F)

Connector

RJ-45 (F)

Connector

E1 8-5

4xE1 Signals

Model1195/8E1QuickStartGuide

4.0 Connecting E1 Links

ConnectE1 lineafterensuring thattransmissiondevice havebeengrounded. ABitError Rate(BER)testmay be

conductedonE1LinkusingaBERTtestertoensurethattheE1errorsarewithinthepermittedlimits/threshold.

4.1 Deﬁnition for E1 Interfaces

TheE1Interface(RJ-45connector)isdeﬁnedas:

5.0 Connecting Ethernet Links

PleaseconﬁguretheEthernetportoftheequipmentatbothsidesaswellastheEthernetPortsofthedevicesthat

areconnectedtotheequipment.ConnecttheEthernetlinks.

PleaseensurethattheconnectingLANsonbothsidesofthelinkareoperatinginthesameIPdomain.

5.1 Verifying the connection

PingovertheEthernetconnectionfromonesidetotheother(near-end to the far-end)toverifythelink.

5.2 Deﬁnition for Ethernet Interfaces

TheEthernetInterface(RJ-45connector)isdeﬁnedas:

1 2 3 4 5 6 7 8

Tx+ Tx- Rx+ N/C N/C Rx- N/C N/C

Data Out + Data Out - Data In + Data In -

1 2 3 4 5 6 7 8

Rx+ Rx- N/C Tx+ Tx- N/C N/C N/C

Data In + Data In - Data Out + Data Out -

Model1195/8E1QuickStartGuide

6.0 Connecting the RS-232 port

Note

AnRS-232COMportcableisprovidedwiththe1195/8E1system.

6.1 RS-232 port cable details

End1

End2

Typeofcable Twistedpaircable-solidconductor

Numberofpairs 2

Diameter 24AWG

Length 3meters

Connections Asperdetailsgivenbelow

DB-9 (Female Connector)

Model1195/8E1QuickStartGuide

6.2 RS-232 pin deﬁnition

DB-9 Pin Number Deﬁnition

RS-232

2 RS-232inputsignalformanagement

3 RS-232outputsignalformanagement

5 GND

OthersNC

Model1195/8E1QuickStartGuide

7.0 Conﬁguring HyperTerminal

ClickontheStartbuttonfromthetaskbaronyourPC.

SelectPrograms>Accesories>Communications>HyperTerminal.Thefollowingscreenwilldisplay:

EnteranameforthenewconnectionandclickOK.Theconnectionwindowwilldisplay:

SelecttheCOMportfromthedrop-downmenu,andclickOK.Thepropertieswindowwilldisplay:

Model1195/8E1QuickStartGuide

ChangetheBitspersecondoptionto19200andchangetheﬂowcontroloptiontoNone.

TheCOMPropertiessettingsshouldbe:

ClickApply,thenclickOK.

AnewHyperTerminalsessionscreenwilldisplay. Press Enter. The system prompt will appear on the

screen.Thispromptis generated by the system. Now,youmayaccess/conﬁgurethesystemwiththeCLI

commands.

Note

RemembertosavethesettingsforfutureusebeforeyouexittheHyperTerminalwindow.

Note

Fordetailedinformationaboutconﬁguringthe1195/8E1systemusingCLIcommandsortheGraphi-

calUserInterface(GUI),refertothe

Model1195/8E1GettingStartedGuide

thatcamewithyourunit.

Bits per second

19200

Data bits

Parity

None

Stop bits

Flow control

None

Inhaltsverzeichnis

Andere Patton electronics Multiplexer Handbücher

Patton electronics

Patton electronics 3054 Bedienungsanleitung

Patton electronics

Patton electronics 3028 Turbo Einrichtungshandbuch

Patton electronics

Patton electronics 3046/V24 Bedienungsanleitung

Patton electronics

Patton electronics 1195/4E1 Bedienungsanleitung

Patton electronics

Patton electronics MicroStat II 3022 Bedienungsanleitung

Patton electronics

Patton electronics 3054 Bedienungsanleitung

Patton electronics

Patton electronics 3022 Bedienungsanleitung

Patton electronics

Patton electronics Multiport Asynchronous Statistical Multiplexer... Bedienungsanleitung

Patton electronics

Patton electronics 3042 Bedienungsanleitung

Beliebte Multiplexer Handbücher anderer Marken

Campbell

Campbell AM416 Bedienungsanleitung

Paradyne

Paradyne SIM2000 Bedienungsanleitung

Panasonic

Panasonic WJFS616 - SWITCHER Bedienungsanleitung

Lanex

Lanex TM-77 Bedienungsanleitung

Bosch

Bosch VSS8394/01T Bedienungsanleitung

Quark-Elec

Quark-Elec QK-A035 Bedienungsanleitung

ADTRAN

ADTRAN Frameport 768 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E247 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8786 Bedienungsanleitung

RFL Electronics

RFL Electronics 9508D UCC Bedienungsanleitung

Miranda

Miranda AMX-101i Bedienungsanleitung

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Bedienungsanleitung

GE StoreSafe SDVR-10 Bedienungsanleitung

Pickering

Pickering 40-613 Bedienungsanleitung

Pickering

Pickering 40-667C Bedienungsanleitung

American Fibertek

American Fibertek MTX-8410C Bedienungsanleitung

ADC

ADC HiGain ELU-319 5E Bedienungsanleitung

Paradyne

Paradyne Hotwire 8774 Bedienungsanleitung