1.0 WARRANTY INFORMATION
Patton Electronics warrants Model 546 and Model 547
components to be free from defects, and will—at our option—repair or
replace the product should it fail within one year from the first date of
shipment.
This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or
consequential damages arising from the use of or inability to use this
product. Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.
1.1 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container.
This number may be obtained from Patton Electronics Technical
Service at: (301) 975-1007; http://www.patton.com: or,
Note: Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 546 or Model 547. Technical Service hours: 8AM to 5PM EST,
Monday through Friday.
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.
1
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions or problems
arise during installation or use of this product, please do not hesitate to
contact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Bidirectional transient protection
• Model 546: 1 male M/34 and 1 female M/34 connector
• Model 547: 1 male M/34 and 1 LFH60 male connector
• Supports data rates up to 20 Mbps
• 1500 Watts of self-resetting surge capacity
• Diverts surges to chassis ground through a braided metal ground
strap
• Complies with IEC 801-5, Level 3, 2kV (surge)
• Failsafe design guards equipment in case of overvoltage
• Made in the U.S.A.
2.2 DESCRIPTION
The Patton Model 546 and Model 547 data line surge protector
guards V.35 data ports against damage and data loss due to transient
surges. Three versions are available. Model 546MF protects 19 lines,
Model 546/34MF protects all 34 lines, and Model 547MM protects 18
lines. Whether due to nearby lightning strikes, electric motors,
florescent lights or the normal operation of AC power protection
equipment, data line transients can be hazardous to V.35 hardware.
The Model 546 and the Model 547 protectors are equipped with a
heavy duty braided metal strap to shunt harmful overvoltages safely to
ground.
The Model 546 and Model 547 surge protectors are CE marked for
EMC directive 89/336/EEC and IEC 801-5.
WARNING: Should your equipment or building be subject to
direct lightening strike, this product will not provide complete
protection.
2
