Key Features
•Hardened design enclosure
•Supports 52V-56VDC
•Supports automatically switch mode and converter mode
•Adjustable SFP speed 1G or 10G
•Surge protection on power input
•ESD protection on RJ-45 port
•Provides increased Noise Immunity
Introduction
Patton’s FP102E/BT90 converts singlemode or multimode fiber to a copper Ethernet signal. With
the built-in high power PoE (Power over Ethernet) injector and a local power source, you can
easily and reliably extend both power (90 watts/high power PoE) and 1–10 gigabit Ethernet to
any PoE enabled end point including devices such as IP security cameras, IP speakers, digital
signage, VoIP phones, wireless access points, POS kiosks, BACs, PLCs, and more.
Because 10-gigabit Ethernet over Cat6a cables is limited to about 50 meters (164 feet), using
fiber as a backhaul allows for a massive increase in distances. SFP options for multimode can
reach up to 1.24 miles (2 km), and singlemode options can range as far as 37 miles (60 km). In
addition to the reach, you get fiber’s superior immunity to noise and harmful transients (surges).
The FP102E/BT90 is housed in an IP30-rated DIN-rail or wall-mount enabled enclosure, and
has a wide operating temperature of -40 to 167°F (-40 to 75°C). Its rugged design and wide
temperature range makes it an ideal media converter for industrial or harsh environments. Its
bandwidth capabilities make it suitable for bandwidth hungry applications like telecom backhaul,
data centers, and AVoIP technologies that require 10-gigabit networks—like SDVoE and
HDBase-T.
.
