Paxar Monarch series Service-Handbuch

Monarch

Pathfinder Ultra

Printer

®®

Platinum

04/18/02 7512

653258

$15.50

32232

SALE

$25.00

58523

PEARL EARRINGS

99565

$200.00

04/18/02

7512

45453

Operator’s

Handbook

Operator’s

Handbook

This device has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the Federal Communications

Commissions Rules and Regulation. These limits are designed to provide

reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense. However, there

is no guarantee that interference will not occur in a particular installation.

If the equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

♦ Re-orient or relocate the receiving antenna.

♦ Increase the separation between the equipment and receiver.

♦ Connect the equipment into an outlet on a circuit different from that

which the receiver is connected.

This Class B digital apparatus meets the requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences du

Règlement sur le Matériel Brouilleur du Canada.

Note: Information in this document supercedes information in previous

versions.

Trademarks

Monarch®, Pathfinder®, Ultra®, 6039, 6063, 9462, and 9465 are trademarks of Paxar

Americas, Inc.

Paxar® is a trademark of Paxar Corporation.

Microsoft and Windows are trademarks

of Microsoft Corporation.

Paxar Americas, Inc.

170 Monarch Lane

Miamisburg, OH 45342 Outside the U.S., send batteries to:

Paxar EMEA, 4 Awberry Court

Croxley Business Park, Hatters Lane,

Watford, WD18 8PD

Table of Contents i

TABLE OF CONTENTS

Introduction ..................................................................................................... 1-1

Using this Manual......................................................................................... 1-2

Important Printer Usage Information ............................................................... 1-3

Attaching the Safety Strap............................................................................. 1-4

Regulatory Compliance ................................................................................. 1-5

Radio Frequency Interference Requirements ................................................... 1-5

Radio Frequency Interference Requirements – Canada..................................... 1-6

European Economic Area .............................................................................. 1-6

Using Batteries ................................................................................................ 2-1

Using the Main Battery.................................................................................. 2-1

Charging the Main Battery.......................................................................... 2-1

Changing the Main Battery ......................................................................... 2-2

Charging the Backup Battery ......................................................................... 2-3

Checking the Battery Status .......................................................................... 2-4

Main Battery Safety Information ..................................................................... 2-5

Using Supplies ................................................................................................. 3-1

Selecting the Supply Type ............................................................................. 3-5

Loading Supplies.......................................................................................... 3-1

Loading for Peel Mode............................................................................... 3-3

Loading for Non-Peel Mode ........................................................................ 3-5

Removing Supplies when Using Peel Mode ..................................................... 3-5

Entering and Printing Data ............................................................................... 4-1

Using the Keypad ......................................................................................... 4-1

Entering Data ........................................................................................... 4-2

Entering Special Characters/Symbols .......................................................... 4-2

ii Table of Contents

Using the Display ......................................................................................... 4-3

Reading the Status Bar .............................................................................. 4-3

Scanning Bar Codes ..................................................................................... 4-4

Certification Note ......................................................................................... 4-5

Printing ....................................................................................................... 4-6

Adjusting the Print Contrast........................................................................... 4-6

Power Management ...................................................................................... 4-8

Radio Frequency Communications.................................................................. 4-8

Care and Maintenance ...................................................................................... 5-1

Cleaning...................................................................................................... 5-1

Cleaning the Printhead .............................................................................. 5-2

Cleaning the Platen Roller ......................................................................... 5-3

Cleaning the Pinch and Feed Rollers........................................................... 5-4

Cleaning the Sensors ................................................................................ 5-4

Cleaning the Scanner Window .................................................................... 5-5

Cleaning the Scanner Flex Cable ................................................................ 5-5

Clearing Supply Jams ................................................................................... 5-6

Storing the Printer ........................................................................................ 5-6

Troubleshooting............................................................................................... 6-1

Checking the Software Version ...................................................................... 6-2

Printing a Test Label..................................................................................... 6-2

Error Codes.............................................................................................. 6-4

Specifications and Accessories ........................................................................A-1

Specifications ..............................................................................................A-1

Accessories .................................................................................................A-2

Introduction 1-1

INTRODUCTION

The Monarch® Pathfinder® Ultra® Platinum 6039™ printer prints,

scans bar codes, collects data, and communicates with other devices.

The printer operates on a MicrosoftWindows-based CE platform.

The printer features

♦ Touch screen display

♦ 16-key alphanumeric keypad

♦ On-Demand and continuous printing

♦ Adjustable supply width capabilities

♦ Clock/calendar

♦ USB port communications

♦ Graphic printing capabilities

♦ Display backlight

♦ Low power shutdown to conserve the

battery

♦ Laser scanner (factory-installed option)

♦ Wireless LAN Radio (factory-installed option)

♦ 128MB and 256MB SD memory card (factory-installed option)

1-2 Introduction

Using this Manual

Following is a summary of the contents of this manual.

Chapter Contents

1 Introduction Information you should know before using the printer.

2 Using the Battery Charging, changing, and using batteries safely.

3 Using Supplies Supply loading and removal.

4 Entering and

Printing Data

Information about using the display, keypad, scanner,

and printing.

5 Care and

Maintenance

Clearing supply jams and cleaning the printer.

6 Troubleshooting Common problems and their solutions.

A Glossary Printer terms and their definitions.

B Reference

Information

Printer specifications and accessories/options.

Audience

This manual is for the operator who scans or manually enters data and

prints and applies labels.

A Quick Reference for this printer is available in the box. A Programmer’s

Manual and other documentation are available on our Web site

(www.paxar.com).

Introduction 1-3

Getting Started

To start using the printer, you must:

1. Charge the main battery. See “Charging the Main Battery” in

Chapter 2 for more information.

Note: You must charge the battery before using it.

2. Insert the main battery. See “Changing the Main Battery” in

Chapter 2 for more information.

3. Attach the safety strap found in the documentation package. See

“Attaching the Safety Strap” later in this chapter for more information.

4. Load supplies in the printer. See “Loading the Supplies” in

Chapter 3 for more information.

5. Turn on the printer.

Note: Your System Administrator must load an application in the printer

before you can use it.

Important Printer Usage Information

♦ Always start with a fully charged battery.

♦ Attach the safety strap to your wrist before using the printer.

♦ Do not pound the printer when applying labels printed in peel mode.

♦ Switch to a fully charged battery every time you load a new roll of

supplies (doing so ensures optimum print quality).

♦ Turn off the printer when not using it.

♦ When you remove the main battery, connect the printer to the Battery

Backup Power.

♦ Operate and store the printer with the recommended temperature and

humidity ranges. See Appendix A, “Specifications and Accessories,”

for more information.

1-4 Introduction

Attaching the Safety Strap

1. Turn the printer upside down, resting its

top on the table.

2. Remove the stylus strap from the loop.

3. Take the thin end of the safety strap, and

push it through the loop at the bottom of

the printer handle (near the battery

compartment).

4. Push the thick end of the safety strap

through the thin end’s loop.

5. Pull the strap. It may be necessary to

help the thin end’s loop fit over the plastic

piece in the middle of the strap.

6. Pull the strap tight.

7. Attach the stylus strap to the loop as

shown.

Introduction 1-5

Regulatory Compliance

Paxar RF products are designed to be compliant with the rules and

regulations in the locations into which they are sold and will be labeled as

required. The majority of Paxar RF devices are type approved and do not

require the user to obtain license or authorization before using the

equipment. Any changes or modifications to Paxar equipment not

expressly approved by Paxar could void the user authority to operate the

equipment.

Radio Frequency Interference Requirements