PCE Instruments PCE-2000 Bedienungsanleitung

www.pce-industrial-needs.com

Tursdale Technical Services Ltd

Unit N12B

Tursdale Business Park

Co. Durham

DH6 5PG

United Kingdom

Phone: +44 ( 0 ) 191 377 3398

Fax: +44 ( 0 ) 191 377 3357

info@tursdaletechnicalservices.co.uk

htt

://www.industrial-needs.com/

Manual

PCE-2000 and PCE-2000DL

Hardness Tester

[email protected]

1. Introduction.....................................................................................................................3

2. Typical Applications.......................................................................................................3

3. Technical Data................................................................................................................3

4. Function of Keyboard ....................................................................................................3

5. Function of Display........................................................................................................3

6. Pretreatment of Samples ...............................................................................................4

6.1. Pre-treatment of Samples Surface .................................................................................................... 4

6.2. Support to test samples ..................................................................................................................... 4

6.3. Advice................................................................................................................................................... 4

6.4. Test sample should not be magnetic in property............................................................................ 4

7. Operation of the Instrument ..........................................................................................4

7.1. Starting................................................................................................................................................. 4

7.2. Function of Menu ................................................................................................................................ 4

7.2.1. Measurement...............................................................................................................................5

7.2.2. Impact Device..............................................................................................................................5

7.2.3. Direction...................................................................................................................................... 5

7.2.4. Average Times............................................................................................................................ 5

7.2.5. Material........................................................................................................................................ 5

7.2.6. Scale ............................................................................................................................................ 6

7.2.7. Tolerance..................................................................................................................................... 6

7.2.8. Date and Time............................................................................................................................. 6

7.2.9. Location....................................................................................................................................... 6

7.2.10. Memory........................................................................................................................................ 6

7.2.11. Print.............................................................................................................................................. 6

7.2.12. Calibration................................................................................................................................... 6

7.2.13. Default.......................................................................................................................................... 7

[email protected]

1. Introduction

PCE-2000 is an advanced Hand-held hardness tester, characterized by its high accuracy, wide measuring

range and simplicity for operation. It is suitable for testing hardness of the ordinary metal and widely applied in

many industrial fields, such as petroleum, chemistry machinery and electric power industries etc.

2. Typical Applications

Installed machines and permanent parts of assembled system

Molding surface of die

Heavy work-pieces

Ineffectiveness analysis of pressure-vessel, turbo-generator set etc.

Bearing and other messy produced parts at production line

Obtaining test data requested as original formal records

Identifying metallic material stored in a warehouse

3. Technical Data

Display : 128×64 LCD

Display error: ±0.5 

Relative repetitive display error: ±0.8 

Memory: 1250

Battery: 2 pieces AAA batters with working more than 48 hours continuously ( no backlight)

Auto-off: 2 minutes without working

Size: 108×62×25 mm

Weight: 180g

4. Function of Keyboard

nON/OFF

oMove/Print data

pMove/Backlight

qDelete

rRe-read

sMenu/Enter

5. Function of Display

nhardness scale

osymbol of average

paverage value

qmeasuring value

rdirection and materials

stype of impact device

ttimes of measurement/average

umemory location

vdate and time

wbattery power

[email protected]

6. Pretreatment of Samples

6.1.Pre-treatment of Samples Surface

To eliminate hardness error possibly resulted from the roughness of sample surface, the test surface should be

polished smooth, neat appearing metallic luster until its roughness Ra attends no more than 2um. The test

surface should be clean and free from oil stain.

6.2.Support to test samples

For test samples weight over 5kg, no support is needed.

Samples of cantilever or thin shell shape and weight over 5kg to be coupled firmly and tightly with them so as

to prevent themselves from bending deformation or displacement due to impact force.

Test sample weight less than 2kg should be coupled grimly and tightly with support weight over 5kg

Minimum weight of a test sample should not be less than 100g, minimum thickness not less than 5 mm and

minimum depth of hardened layer, not less than 0.8mm.

6.3. Advice

When the test sample is a large plate, long bar or bent work piece, impact force can cause it deformed or

unstable and bring about error in measurement even if its weight or thickness seems applicable. In this case

reinforcement should be bound to the back of the sample surface opposite to the impact force.

6.4.Test sample should not be magnetic in property.

Note: table 1 show the relationship of impact and sample

Sample

Impact

Device

Sample Weight (kg) Min Thickness (mm) Max

Roughness

Need

suppo-rt Need to be

stabilized

Strengthe-ning

need sample Hard-ened

layer ISO Ra

D DC 0.05-2 2.5 >5 3 0.8 N7 2

G 0.5-5 5-15 >15 10 N9 7

C 0.02-

0.05 0.5-1.5 >1.5 1 0.2 N5 0.4

7. Operation of the Instrument

7.1.Starting

Insert the plug of impact device to the gauge and press key turning on the power, then detailed items of

available function last used will display on the LCD.

7.2.Function of Menu

Users can change or modify the function of gauge by selecting different items of menu.

Press key into menu state, then press key or key to select item you want to change or

modify.

[email protected]

The display like this:

1. MEASUREMENT

2. IMPACT DEVICE

3. DIRECTION

4. AVERAGE TIMES

5. MATERIAL

6. SCALE

7. TOLERANCE

8. DATE AND TIME

9. LOCATION

10. MEMORY

11. PRINT

12. CALIBRATION

13. DEFAULT

7.2.1. Measurement

-Press key, the gauge will go back measurement state.

7.2.2. Impact Device

There are 7 types of impact device be selected according to the measurement and material.

1. D 2. DC 3. D+15 4. DL 5. C 6. G 7. E

-Press key or key to select the type of impact device

-Press key to confirm

7.2.3. Direction

You can select 5 directions, such as:

1. 2. 3. 4. 5.

-Press key or key to select the direction

-Press key to confirm

7.2.4. Average Times

The average times from 2 to 8, selected by pressing key to increase times, Press key to confirm.

7.2.5. Material

The gauge provides 9 types of material,

1. STEEL

2. TOOL STEEL

3. STAINLESS

4. GREY CAST IRON

5. CAST IRON GGG

6. CAST ALUMINUM

7. BRASS

8. BRONZE

9. COPPER

-Press key or key to select the required material

[email protected]

-Press key to confirm

7.2.6. Scale

7 types of scale can be selected according to measurement.

1. HL 2. HRC 3. HRB 4. HB 5. HS 6. HV

-Press key or key to select the required scale

-Press key to confirm

7.2.7. Tolerance

If the measurement value is lower than lower limit value or upper than upper limit value, the sign “ L “ or “ H “

will appear on the LCD.

-Press key to increase limit value

-Press key to change setting value

-Press key to confirm

7.2.8. Date and Time

The gauge provides real display of date and time. Through pressing key or key, you can change

or modify the date and time.

7.2.9. Location

The gauge provides 1250 memory locations, from 0000 to 1249.

-Press key to increase location value

-Press key to change location value

-Press key to confirm

7.2.10. Memory

You can select “AUTO STORE ”or “CLOSE STORE ”states to determining store or not store measuring value.

7.2.11. Print

Through determining the desired initial and end location number, you can print the value stored in the gauge.

7.2.12. Calibration

You can modify measurement value when an error happening by changing desired value.

[email protected]

7.2.13. Default

The gauge will recover the default parameters when confirm “DEFAULT ”state.

Materials HL HRC HRB HB HS HV

30D

10D

Steel 300~900 20.0~68.0 38.4~99.5 80~647 32.5~99.5 80~940

Tool steel 300~640 20.4~67.1 46.5~101.7 80~898

Stainless steel 300~800 19.6~62.4 85~656 85~802

Cast iron GG 360~650 90~334

Cast iron GGG 400~660 131~367

Cast aluminum 174~560 20~190

Brass 200~550 13.5~95.3 40~173

Bronze 300~700 60~290

Copper 200~690 45~315

No. Materials D DC D15 C E G DL

1 Steel

★★★★★★★

2 Tool steel

★★★★★

3 Stainless steel

★★

4 Cast iron GG ★★

★

5 Cast iron GGG ★★

★

6 Cast aluminum

★★

7 Brass

★★

8 Bronze

★★

9 Copper

★★

Note: ★means available

In this direction will find a vision of the measurement technique:

http://www.industrial-needs.com/measuring-instruments.htm

NOTE: "This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive

atmospheres (powder, flammable gases)."

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PCE Instruments Prüfgeräte Handbücher

PCE Instruments

PCE Instruments PCE-IT111 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-HDM 7 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-900-ICA Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-SC 09 Bedienungsanleitung

PCE Instruments

PCE Instruments ERICHSEN CUPTIMER 243 T Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VM 25 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-UT81B Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-OM 15 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-ITE 50 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VT 2700 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VC20 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-HVAC 4 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-VC 21 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-LOC 10 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-PWT 10 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-RTD 20 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-830+PCE-6802 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-2600N Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-2500 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-RT 2300 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-SC 42 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-310 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-ERT 10 Bedienungsanleitung

PCE Instruments

PCE Instruments PCE-2000N Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung