PDi PD168-059 Bedienungsanleitung
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Document Number:
PD196-399R2
Installation Instructions
Page 1 of 6
PDi Communication Systems, Inc. ▪40 Greenwood Ln ▪Springboro, Ohio 45066 USA ▪www.pdiarm.com and www.mymedTV.com ▪Phone 800.628.9870
INTRODUCTION
This document provides the information to assemble and install a PD168-059 Dual Monitor Mount provided by
PDi Communication Systems. These instructions cover the standard design of the pendant mount and any
customizations that have been included may not be specifically outlined in these instructions.
SAFETY
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
TOOLS REQUIRED
1. Phillips screwdriver
2. 3/16” and 7/16” hex wrenches
3. Safety glasses/goggles
INSTALLATION
Included Hardware:
•8 each; PDIPPHMSM4X710 –Screw, M4 x 10mm Long, Phillips Pan Head
1. Unpack the P19A TV (sold separately) and place on workbench face down. If necessary, place protective
mat on workbench to ensure the viewing surface is not damaged.
2. Place the 15.6” Teguar Tablet (not provided by PDi) facedown next to the P19A TV so that it is on the
right as shown in Figure 1.
FIGURE 1. MONITOR ARRANGEMENT
BOTTOM OF MONITORS
PDI-P19A TV
15.6” Teguar Tablet
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Document Number:
PD196-399R2
Installation Instructions
Page 2 of 6
PDi Communication Systems, Inc. ▪40 Greenwood Ln ▪Springboro, Ohio 45066 USA ▪www.pdiarm.com and www.mymedTV.com ▪Phone 800.628.9870
3. Remove the cover from the Dual Mount Arm as shown in Figure 2. Do not discard any of the parts, as
they will be needed later.
FIGURE 2. DUAL MOUNT ARM
4. With the Dual Mount Arm oriented as shown in Figure 3, feed the cables from the P19A and the tablet
through the 1.25” hole in the VESA mounting bracket for each monitor.
FIGURE 3. CONNECTING THE DUAL MOUNT ARM
Feed cables from
P19A TV through
this opening.
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Document Number:
PD196-399R2
Installation Instructions
Page 3 of 6
PDi Communication Systems, Inc. ▪40 Greenwood Ln ▪Springboro, Ohio 45066 USA ▪www.pdiarm.com and www.mymedTV.com ▪Phone 800.628.9870
5. Place the Dual Mount Arm on the back of each monitor and connect the monitors with the M4 screws,
PDIPPHMSM4X710 (4 per monitor; see Figure 4).
FIGURE 4. SCREW INSTALLATION AND CABLE ROUTING
6. Attach the Dual Mount Arm to the nose of the PDI arm using the socket head cap screw, PD209-002, and
lock washer, PDISLW25, from the Swivel Assembly in the Dual Mount Arm, as shown in Figures 5A &
5B.
Feed the cables from the
arm along this channel.
Feed cables through this hole
to connect to the monitors.
M4 X 10mm Screws
(4 per Monitor)
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Document Number:
PD196-399R2
Installation Instructions
Page 4 of 6
PDi Communication Systems, Inc. ▪40 Greenwood Ln ▪Springboro, Ohio 45066 USA ▪www.pdiarm.com and www.mymedTV.com ▪Phone 800.628.9870
FIGURE 5A. MOUNTING DUAL ARM TO SWING ARM
FIGURE 5B. MOUNTING DUAL ARM TO SWING ARM
7. Route cables through the Dual Mount Arm as specified in Figure 4 and connect the devices according to
their respective installation documents.
8. Confirm the devices are working properly. Reinstall the cover that was removed in Step 3 (see Figure 2).
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Document Number:
PD196-399R2
Installation Instructions
Page 5 of 6
PDi Communication Systems, Inc. ▪40 Greenwood Ln ▪Springboro, Ohio 45066 USA ▪www.pdiarm.com and www.mymedTV.com ▪Phone 800.628.9870
REVERSING THE SWIVEL MOUNT
If the desired direction the TV is facing changes, follow the steps below the switch the direction.
1. Remove the plastic Cap Plug, PDI-271.
2. Using two 7/16” hex wrenches, unscrew the Stover lock nut, PDISLN2520, and hex head bolt,
PDIHHCS2520200, as shown in Figure 6A.
a. NOTE: The hex head bolt is what holds the lower swivel assembly (swivel stem, brake discs,
washers, etc.) together. If not secured, the lower swivel assembly will fall apart and will need to
be reassembled before Step 3.
FIGURE 6A. UNSCREWING THE HEX BOLT
3. Rotate the entire upper swivel assembly one-hundred-eighty degrees. Refer to Figure 6B.
FIGURE 6B. ROTATING THE SWIVEL
MODEL NUMBER:
PD168-059 Dual Monitor Mount
Document Number:
PD196-399R2
Installation Instructions
Page 6 of 6
PDi Communication Systems, Inc. ▪40 Greenwood Ln ▪Springboro, Ohio 45066 USA ▪www.pdiarm.com and www.mymedTV.com ▪Phone 800.628.9870
4. Realign the upper swivel assembly with the lower swivel assembly. Re-install the hex head bolt and
Stover lock nut, tighten to 100in-lbs Torque. Re-assemble the Cap Plugs, as shown in Figure 6C.
FIGURE 6C. REATTACHING THE SWIVEL
5. If the components in the lower swivel move or their alignment is lost, align the components as shown
below to arrange correctly.
WARRANTY
PDi Communication Systems Inc., (“PDi”) standard warranty information is found at pdiarm.com. For information
regarding authorized servicing and all other information pertaining to this warranty, please contact PDi
COMMUNICATION SYSTEMS, INC. at 40 Greenwood Ln, Springboro, Ohio 45066 or phone 800-628-9870 and
ask for the PDi ProServices team.
Inhaltsverzeichnis
Andere PDi Rack & Stand Handbücher
PDi
PDi PD168-046 Bedienungsanleitung
PDi
PDi PD251-026 Bedienungsanleitung
PDi
PDi AA1000 Series Bedienungsanleitung
PDi
PDi PD251-045 Bedienungsanleitung
PDi
PDi PD168-051 Bedienungsanleitung
PDi
PDi Reach 17 Bedienungsanleitung
PDi
PDi PD168-231 Bedienungsanleitung
PDi
PDi PD168-084 Bedienungsanleitung
PDi
PDi PD168-027 Bedienungsanleitung
PDi
PDi PD168-204 Bedienungsanleitung
PDi
PDi PD168-086 Bedienungsanleitung
PDi
PDi PD251-028 Bedienungsanleitung
PDi
PDi PD181-682 Bedienungsanleitung
PDi
PDi AB1000 Series Bedienungsanleitung
PDi
PDi PD168-039 Bedienungsanleitung
PDi
PDi P32LCD Bedienungsanleitung
PDi
PDi PDI-CEILING-MT Bedienungsanleitung
PDi
PDi PD168-031 Bedienungsanleitung
PDi
PDi PDI-267 Bedienungsanleitung
PDi
PDi 1013 Series Bedienungsanleitung
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
