PDQ 6EW Bedienungsanleitung
6EW Exit Device Trim Installation Instruction
For cylinder installation or door adjustment, see page 2.
1. Hand trim (1). Install lever drive spindle (2).
2. Install trim (1) and exit device head cover (3).
Key/Cylinder Parts
a. Cylinder Lock Nut (P/N 88644) d. Mortise Cylinder
b. Cylinder Lock Plate (P/N 88608) e. Wave Spring (P/N 88657)
c. Collar (Refer to Cylinder Length Chart for P/N)
Cylinder Length Chart
Cylinder Length
Part Number
1-1/8” and 1-1/4"
I5503
1-1/2”
I5504
2754 Creek Hill Road
Leola, PA 17540-2005
Customer Service: 1-800-441-9692
1
2
1
3
a
b
c
e
d
Cylinder Installation
1. Remove back plate (4). Install wave spring (e) and cylinder (d) into the collar (c). Install
cylinder and collar assembly. Secure with cylinder locking plate (b) and locknut (a).
2. Align drive pin (5). Install and secure back plate (4).
Adjust for Door Thickness
Trim is factory preset for a 1 ¾“.
1. Remove screw (6) from drive pin (5).
2. Move pin 2 to 2 ¼“.
3. Reinstall screw.
P/N 629903 Rev 0
4
e
d
c
a
b
4
5
6
5
Inhaltsverzeichnis
Andere PDQ Sperren Handbücher
PDQ
PDQ 6200 Series Bedienungsanleitung
PDQ
PDQ SX Series Leitfaden
PDQ
PDQ MR Series Bedienungsanleitung
PDQ
PDQ KMS STS pdqSMART Bedienungsanleitung
PDQ
PDQ SDS pdqSMART Bedienungsanleitung
PDQ
PDQ MRS pdqSMART Bedienungsanleitung
PDQ
PDQ CLS Bedienungsanleitung
PDQ
PDQ MRS STS Bedienungsanleitung
PDQ
PDQ CLS Bedienungsanleitung
