Peavey Impulse 1015 Bedienungsanleitung

Crossover Slope:

12 dB/octave (2nd order) low pass,

12 dB/octave (2nd order) with padding and

CD horn EQ high pass

Recommended Active Crossover

Frequency Region and Slope:

Low Frequency - High Frequency:

1800 Hz at 12 dB/octave

Time Offset:

Low Frequency: 0.00 ms

High Frequency: 0.00 ms

Impedance (Z):

Full Range: 4 ohm 8 ohm

Nominal: 4.0 Ω8.0 Ω

Minimum: 3.4 Ω6.3 Ω

Low Frequency:

Nominal: 4.0 Ω8.0 Ω

Minimum: 3.4 Ω6.3 Ω

High Frequency:

Nominal: 8.0 Ω8.0 Ω

Minimum: 5.4 Ω5.4 Ω

Input Connections:

2x 4-pin Neutrik®& 2x 1/4in.

phone jack input,

1x 4-pin switching Neutrik®

biamp LF and HF input

Enclosure Materials and Finish:

High impact polypropylene finished in black

or white

Mounting Provisions:

2x Versamount®70 Mounting locations

(1 top, 1 bottom) & 1 x stand mount on bottom

Dimensions (H x W x D):

Front:

28.56 in. x 21.31 in. x 17.00 in.

725 mm x 541 mm x 432 mm

Rear:

26.75 in. x 11.50 in. x 17.00 in.

679 mm x 292 mm x 432 mm

Optional Accessories:

Impulse®1015 Subwoofer

Net Weight: 56 lbs. (25.5 kg)

Shipping Weight: 62.4 lbs.

Additional Remarks:

Also available in biamplified powered unit

Features:

• 1000W program power

• Sound Guard™

• Black Widow®15" premium woofer

• RX™22 titanium compression driver

• Multiple handgrips and stand mount

• Peak SPL in excess of 133 dB

• Weather-resistant woofer and grille

• Top and bottom flying point inserts

• Molded-in horn with exceptionally smooth

response and pattern control

DESCRIPTION:

The Impulse 1015 is a two-way full-

range speaker system engineered to pro- 2

20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

100

140

180

300

360

Beamwidth (Degrees)

Beamwidth

Vertical

Horizontal

Figure 3

20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

100

110

dB SPL (re 20 Pa)

Amplitude Response (1W 1m On-Axis)

Figure 1

Normal

20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

100 Impedance

()

Figure 2

20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

100 Q & Directivity Index

Figure 4

vide ultra-high performance in a portable,

compact, weather-resistant package. The

enclosure utilizes high-impact polypropy-

lene in an injection-molded plastic trape-

zoidal shape, along with a coated perforat-

ed metal grille to offer a cosmetically ele-

gant yet durable system.

The two-way system includes a 15"

Black Widow®woofer with a Kevlar®

impregnated cone and a specially treated

surround, cone and dust cap for excellent

weather resistance. The RX™22 compres-

sion driver features a 2" titanium

diaphragm, a patented phase plug (U.S.

Patent # 6,064,745), and is coupled to an

extremely smooth and well controlled con-

stant directivity horn, with a coverage pat-

tern of 90 degrees by 45 degrees that is

molded into the enclosure. Input connec-

tion to the system is made via 1/4" phone

jacks (2) or 4-pin Neutrik®Speakon®con-

nectors. Provisions for biamplification are

made through a 4-pin Neutrick switching

jack. The internal passive crossover fea-

tures Sound Guard™to protect the tweet-

er, and utilizes high performance compo-

nents and an advanced topology

crossover to provide high power handling

and a smooth yet clear response. The

optimal integration of the crossover with

the selected drivers results in a smooth

frequency response from 60 Hz to 18 kHz.

The free-flow vented cabinet offers

mounting point inserts top and bottom as

well as a molded-in stand adapter for

maximum utility and ease of use.

FREQUENCY RESPONSE:

This measurement is useful in deter-

mining how accurately a given unit repro-

duces an input signal. The frequency

response of the Impulse 1015 is mea-

sured at a distance of 1-meter using a 1

watt (into the nominal impedance) swept-

sine input signal. As shown in figure 1, the

selected drivers in the Impulse 1015 8

ohm combine to give a smooth frequency

response from 60Hz - 18 kHz.

DIRECTIVITY:

Beamwidth is derived from the -6 dB

points from the polar plots (Figure 3)

which are measured in a whole space

anechoic environment. Q and Directivity

Index are plotted for the on-axis measure-

ment position. These are specifications

that provide a reference to the coverage

characteristics of the unit. These parame-

ters provide insight for proper placement

and installation in the chosen environ-

ment. The blending of the components of

the Impulse 1015 8 ohm exhibit a desir-

able beamwidth and directivity (Figure 3

and 4) suitable for sound reinforcement

applications.

20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

100

110

120

dB SPL (re 20 Pa)

Harmonic Distortion : 10% Rated Power

Figure 5 3rd Harmonic

2nd Harmonic

Harmonic Distortion

Second and third harmonic distortions vs. frequency are plotted in

Figures 5 and 6 for two power levels. Ten percent (10%) of rated

input power and either one percent (1%) of rated input power or one

watt, whichever is greater. Distortion is read from the graph as the

difference between the fundamental signal (frequency response)

and the desired harmonic. As an example, a distortion curve

that is down 40 dB from the fundamental is

equivalent to 1% distortion.

20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

100

110

dB SPL (re 20 Pa)

Harmonic Distortion : 1% Rated Power

Figure 6 3rd Harmonic

2nd Harmonic

POWER HANDLING:

There are many different approaches to

power handling ratings. Peavey rates this

loudspeaker system's power handling

using a full-range form of the AES

Standard 2-1984. Using audio band 20

Hz to 20 kHz pink noise with peaks of four

times the RMS level, this strenuous test

signal assures the user that every portion

of this system can withstand today's high

technology music. This rating is contin-

gent upon having a minimum of 3 dB of

amplifier headroom available.

ARCHITECTURAL AND ENGINEERING

SPECIFICATIONS:

The 4 ohm loudspeaker system shall

have an operating bandwidth of 58 Hz -

18 kHz. The nominal output level shall be

99 dB when measured at a distance of

one meter with an input of one watt. The

nominal impedance shall be 4.0 ohms.

The maximum continuous power handling

shall be 700 watts, maximum program

power of 1,400 watts and a peak power

input of at least 2,800 watts, with a mini-

mum amplifier headroom of 3 dB. The

nominal radiation geometry shall be 95

degrees in the horizontal plane and 70

degrees in the vertical plane. The outside

dimensions shall be 28.56 inches high by

21.31 inches wide by 17.00 inches deep.

The weight shall be 56 pounds. The loud-

speaker system shall be a Peavey model

Impulse 1015 4 ohm.

The 8 ohm loudspeaker system shall

have an operating bandwidth of 60 Hz -

18 kHz. The nominal output level shall be

100.0 dB when measured at a distance of

one meter with an input of one watt. The

nominal impedance shall be 8.0 ohms.

The maximum continuous power handling

shall be 500 watts, maximum program

power of 1,000 watts and a peak power

input of at least 2,000 watts, with a mini-

mum amplifier headroom of 3 dB. The

nominal radiation geometry shall be 95

degrees in the horizontal plane and 45

degrees in the vertical plane. The outside

dimensions shall be 28.56 inches high by

21.31 inches wide by 17.00 inches deep.

The weight shall be 56 pounds. The loud-

speaker system shall be a Peavey model

Impulse 1015 8 ohm.

CAUTION: Before

attempting to suspend

this speaker, consult a certified

structural engineer. Speaker

can fall from improper suspen-

sion, resulting in serious injury

and property damage. Do not

suspend or mount any product

or device from this enclosure!

Maximum enclosure angle 45o.

Use only the correct mating

hardware. All associated rig-

ging is the responsibility

of others.

THREE + TWO LIMITED

WARRANTY

NOTE: For details, refer to the war-

ranty statement. Copies of this

statement may be obtained by

contacting Peavey Electronics

Corporation, P.O. Box 2898,

Meridian, Mississippi 39302-2898.

Neutrik®& Speakon®are a registered trademark of Neutrik AG.

250 Hz 315 Hz 400 Hz

Impulse®1015

Horizontal Polar Patterns

6 dB per Division

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

1 kHz 1.25 kHz 1.6 kHz

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

500 Hz 630 Hz 800 Hz

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

2 kHz 2.5 kHz 3.15 kHz

-90o

-60o

-30o

30o

60o

90o

8 kHz

-90o

-60o

-30o

30o

60o

90o

12.5 kHz

-90o

-60o

-30o

30o

60o

90o

16 kHz

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

-90o

-60o

-30o

30o

60o

90o

4 kHz 5 kHz 6.3 kHz

Impulse®1015

Horizontal Polar Patterns

6 dB per Division

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

250 Hz 315 Hz 400 Hz

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

1 kHz 1.25 kHz 1.6 kHz

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

500 Hz 630 Hz 800 Hz

Impulse®1015

Vertical Polar Patterns

6 dB per Division

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

2 kHz 2.5 kHz 3.15 kHz

30o

60o

90o

-30o

-60o

-90o

8 kHz

30o

60o

90o

-30o

-60o

-90o

12.5 kHz

-90o

-60o

-30o

30o

60o

90o

16 kHz

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

30o

60o

90o

-30o

-60o

-90o

4 kHz 5 kHz 6.3 kHz

Impulse®1015

Vertical Polar Patterns

6 dB per Division

Impulse®1015

Biamp Wiring Diagram for Speakon®Use

Mixer Output

CH A -

Low

Output

CH B -

High

Output

Highs

Pin 2+ (Hi+)

Pin 2- (Hi-)

Pin 1+ (Low+)

Pin 1- (Low-)

Lows

*CS®800s equipped

with optional

X1 Crossover

Module

*CS®800s

Impulse®1015

Top Mounting Dimensions

Andere Handbücher für Impulse 1015

Inhaltsverzeichnis

Andere Peavey Lautsprechersystem Handbücher

Peavey

Peavey PVXp 15 DSP Bedienungsanleitung

Peavey

Peavey PR 600 Bedienungsanleitung

Peavey

Peavey SP 3X Bedienungsanleitung

Peavey

Peavey IMPULSE 12 D Bedienungsanleitung

Peavey

Peavey Impulse 200 Bedienungsanleitung

Peavey

Peavey SP 15M Bedienungsanleitung

Peavey

Peavey PR 12 D Bedienungsanleitung

Peavey

Peavey AQ 12 Bedienungsanleitung

Peavey

Peavey Impulse 115 Bedienungsanleitung

Peavey

Peavey Tri-Flex Bedienungsanleitung

Peavey

Peavey IMPULSE 12 D Bedienungsanleitung

Peavey

Peavey DPE 2P Bedienungsanleitung

Peavey

Peavey Stadia II Bedienungsanleitung

Peavey

Peavey RBN 118 Sub Bedienungsanleitung

Peavey

Peavey PR 606 Bedienungsanleitung

Peavey

Peavey PR 15 D Bedienungsanleitung

Peavey

Peavey 4000 XT Bedienungsanleitung

Peavey

Peavey PV 1015 D Bedienungsanleitung

Peavey

Peavey PVXp 12 DSP Bedienungsanleitung

Peavey

Peavey TLS-5X Bedienungsanleitung

Peavey

Peavey PV 115 D Bedienungsanleitung

Peavey

Peavey ER 1500 Bedienungsanleitung

Peavey

Peavey Impulse 1012 Sub Bedienungsanleitung

Peavey

Peavey PV 115 D Bedienungsanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung