PEERLESS HP450-GB Leitfaden

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

Max Load Capacity: 150 lb (68 kg)

Installation and Assembly

Models: HP450-GB

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

2 of 8

NOTE: Read instruction sheet before you start installation and assembly.

NOTE: Some parts may appear slightly different than illustrated.

055

HIJK

LM N OQ

Tools Needed for Assembly

•drill

•17/64" drill bit

•phillipsscrewdriver

•3/32"allen wrench

•5/8"open box wrench

Parts List

Description Qty. Part #

support tube 1 090-P1783-1

Bbase backer plate 1 090-P1544

Cdesktop swivel base 1 090-P821

Dadapter plate 1 090-P1552

Fthrust washer 1 590-1287

Gsplit washer 2 540-9402

H1/4-20 x 1/2'' phillips screw 2 510-9108

IM4 X 12 mm serrated washer head socket pin screw 4 510-1079

J4 mm security allen wrench 1 560-9646

K10-32 x 1/2" set screw 2 520-1614

L1/4-20 x 1.5'' threaded rod 4 520-2250

M1/4-20 X 3 threaded rod 4 520-2585

N1/4-20 locknut 4 530-1021

OM10 x 15 mm penta-pin screw 4 520-9263

Ploc-tite 271 thread lock adhesive (not shown) 1 570-0040

Q2" penta-pin driver 1 520-9260

Runiversal adapter plate 1 201-P1110

Sdeep adapter bracket 2 201-P1510

Tshallow adapter bracket 2 201-P1511

UM5 x 10 mm socket pin screw 4 520-1063

fender washer 4 540-1008

Wslope nut 3 530-0035

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

3 of 8

M5 x 25 mm (4)

520-1122

M4 x 12 mm (6)

510-1079

M4 x 25 mm (4)

510-1082

M5 x 12 mm (4)

520-1064 M6 x 12 mm (4)

520-1050

M6 x 25 mm (4)

520-1211

I.D. 5.6 mm (4)

540-1057

multi-washer(6)

580-1036

I.D. 8.7 mm (4)

540-1059

SecurityAdapter Bracket Fasteners

M6 x 20 mm (4)

520-9554

M6 x 30 mm (4)

520-1067

M8 x 15 mm (6)

520-1068

M8 x 40 mm (4)

520-1152

M8 x 25 mm (4)

520-1101

1Use base backer plate (B) as a template to mark location of holes. Drill four holes using a 17/64'' drill bit in a square

formation.In the center of the square formation drill 2"to 3" cord management hole.

BSQUAREFORMATION

CORDMANAGEMENT

CUT-OUT FRONTOFSCREEN

BOTTOM VIEW

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

4 of 8

• Wooden mounting surface requires a minimum of 3/4" thickness to hold screen securely

WARNING

Turnbase (C)upside down insertsupport tube (A), and

thrustwasher (F) asshown below.

If the desk thickness is between 3/4" to 1" use

1/4-20 x 1.5" threaded rods (L). If the desk thickness

is between 3/4" to 2-3/8" use 1/4-20 x 3" threaded

rods(M).Turn base (C)upsidedownand insert four

threaded rods (L or M) into base (C), as shown in

figure2.1.

NOTE: Threadedrodsmust fasten a minimumof

threeturns.

NOTE: Ifenhanced security isdesired, use three

dropsof loc-tite 271thread lock adhesive(P)along

1/4"at the endof each threadedrod. Insert adhesive

end of threaded rods (L or M) into bottom of base (C). A

fig. 3.1

L or M

fig. 2.1

Refer to fig. 4.1 and 4.2, select the desired swivel degree. Using a 3/32" allen wrench, fasten two set screws (K) where

indicated below to the outside of desired angle in steel base (C).

NOTE: Set screws (K) must be bottomed out into base.

Swivel Restriction

fig. 4.1 fig. 4.2

60°

120°

LOCKAT 0°

180°

240°

210°

40°

30°

210°

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

5 of 8

NOTE:Adapter plate support box (D) can be flipped either way to allow necessary screen clearance. For best results,

have screen close to desktop but not touching.

Adapter plate support box (D) is adjustable up to 6" at 1" increments.Attach adapter plate support box (D) to support

tube (A) as shown in fig 7.1, then fasten two 1/4-20 x 1/2" phillips screws (H) and two split washers (G) through

adapter plate support box (D) and support tube (A), as shown in fig. 7.2.

fig. 7.1

fig. 7.2

SUPPORTINGSURFACENOT SHOWN FOR CLARITY

Lineup base assembly (step 5),through supporting surface with patternof

base (C) facing the front as shown in Detail 1. Using four fender washers (V)

and four lock nuts (N) tighten in numbered pattern as shown in Figure 6.1. At

minimum 1/4 - 20 locknuts (N) should be flush with bottom of threaded rods

(L or M) and no less than. For added security replace two of the washers and

locknuts with slope nuts. Hand tighten slope nuts (W) onto two of the thread

rods (L or M) till snug against bottom of table as shown in Figure 6.2. Thread

another slope nut (W) upside-down, about two turns from first slope nut (S) as

shown in Detail 2. Insert a 5/8"open box wrench between both slope nuts (W)

andtighten. NOTE: Avoidjamming both slopenuts(W)together, doingso

may make it difficult to remove slope nut used for tightening. After slope nut

issecure remove bottom slope nut.

NOTE: Ifenhanced security is desired, use two drops of loc-tite 271 thread

lock adhesive (P) on the threads of each 1/4 - 20 locknut (N).

5Lineup backer plate (B) with

threadedrods (L or M).

NOTE: Washer (F) must be

centered

BL or M

fig. 5.1

Detail 2

fig. 6.1

SUPPORTING

SURFACE

FRONT

BOTTOMOF TABLE

TIGHTENING

SLOPE

NUT

fig. 6.2

CAUTION

• Installations to desktops that have a

gapbetweentwosupportingboards

arenotacceptable mounting

surfaces for the HP line of desktop

swivelmounts.

VFRONTOF

SCREEN

Detail 1

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached

hardwareandcomponents

WARNING

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

6 of 8

For installing screens with a VESA 100 hole pattern: Using the 4 mm security allen wrench (J), attach screen to

adapter plate (D) using four M4 x 12 mm serrated socket pin screws (I) as shown in figure 8.1.

For installing screens with Universal Adapter Plate: Using the penta-pin driver (Q), attach screen to adapter

plate (D) using four M10 x 15 mm penta-pin screws (O) as shown in figure 8.2.

NOTE:Foruniversaladapter plate (E), refertothe main instructionfor further installation.

SCREEN

INSTALLING SCREENS WITH VESA 100 HOLE PATTERN

SUPPORTINGSURFACENOT SHOWN FOR CLARITY

fig. 8.1

fig. 8.2

INSTALLING UNIVERSAL ADAPTER PLATE

Usingthe penta-pin driver (Q), attach universaladapter plate (R)toadapter plate (D)usingfourM10 x 15 mm penta-

pin screws (O) as shown in figure 8.2.

SUPPORTINGSURFACENOT SHOWN FOR CLARITY

8-1

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

7 of 8

Note: "X"dimensions should beequal.

• Tightenscrews so adapter brackets arefirmly

attached. Do not tighten with excessive force.

Overtighteningcan cause stress damage to

screws,greatlyreducing their holdingpower and

possibly causing screw heads to become

detached. Tighten to 40 in. • lb (4.5 N.M.)

maximumtorque.

WARNING

Installing Adapter Brackets

Refer to Screen Compatibility Chart to determine the proper fasteners to use.

To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place

screen face side down. If screen has knobs on the back, remove them to allow the adapter brackets to be attached.

Place adapter brackets (S or T) on back of screen, align to holes, and center on back of screen as shown in figure

8.3.Attach the adapter brackets to the back of the screen using the appropriate combination of screws, multi-

washers, and spacers as shown in figure 8.5.

Note: Top and bottom holes must always be used.

Verifythat all holes are properly aligned, andthen tighten screws using aphillipsscrewdriver.

Note: Tightenusing 4 mm security allenwrench (J).

• If screws don't get three complete turns in the screen

inserts or if screws bottom out and bracket is still not

tightly secured, damage may occur to screen or

productmay fail.

WARNING

MEDIUMHOLEFORM5SCREWS

SMALLHOLEFORM4SCREWS

LARGEHOLEFORM6SCREWS

fig. 8.4

CENTERBRACKETS

VERTICALLYONBACKOF

SCREEN

fig 8.3

Notes:

• Thenumberoffasteners used will vary,

dependingupon the type ofscreen.

• Multi-washers and spacers may not be

used,depending upon thetype of screen.

• Use the corresponding hole in the multi-

washer that matches your screw size as

shownin figure 8.4.

SCREWS

SPACERS

S or T

fig 8.5

MULTI-

WASHER

MULTI-WASHER

8-2

ISSUED: 09-10-07 SHEET #: 090-9130-7 07-06-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

8 of 8

Mounting and Removing Flat Panel Screen

Hook adapter brackets (S or T) onto adapter bracket (R), then slowly swing screen in as shown. Turn screws

clockwise at least six times to prevent screen from being removed as shown in detail 1.

Note: Tightenusing 4 mm security allenwrench (J).

Screen can be adjusted horizontally if desired.

Note: To lock the screen down, tighten screws to adapter bracket as shown in detail 1.

Toremovescreen from mount,loosenscrews,swingscreenaway frommount,andliftscreen offof mount.

S or T

DETAIL 1

SCREWS

• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.

WARNING

8-3

DESKTOP MOUNT NOT SHOWNFOR CLARITY

Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.

Inhaltsverzeichnis

Andere PEERLESS TV-Halterung Handbücher

PEERLESS

PEERLESS ST 632P Leitfaden

PEERLESS

PEERLESS PARAMOUNT PT660 Bedienungsanleitung

PEERLESS

PEERLESS WSP 320 Bedienungsanleitung

PEERLESS

PEERLESS CMJ 470 Leitfaden

PEERLESS

PEERLESS Smartmount ST630P and assembly Leitfaden

PEERLESS

PEERLESS MIS374A Leitfaden

PEERLESS

PEERLESS SmartMount SF670 and assembly Leitfaden

PEERLESS

PEERLESS PARAMOUNT PF640 and assembly Bedienungsanleitung

PEERLESS

PEERLESS Smartmount ST650 Leitfaden

PEERLESS

PEERLESS SUAC9000 and assembly Leitfaden

PEERLESS

PEERLESS Smartmount SA752PU Bedienungsanleitung

PEERLESS

PEERLESS PARAMOUNT PRTLU Bedienungsanleitung

PEERLESS

PEERLESS SlimLine SLWS210/BK Bedienungsanleitung

PEERLESS

PEERLESS HAVE1 FPZ-655 Bedienungsanleitung

PEERLESS

PEERLESS SA730P and assembly Leitfaden

PEERLESS

PEERLESS Smartmount ST632 Bedienungsanleitung

PEERLESS

PEERLESS PARAMOUNT PRFLU Bedienungsanleitung

PEERLESS

PEERLESS PARAMOUNT PT660 Leitfaden

PEERLESS

PEERLESS Paramount PP730 and assembly Leitfaden

PEERLESS

PEERLESS SmartMount SF680 and assembly Leitfaden

PEERLESS

PEERLESS SUF660P and assembly Leitfaden

PEERLESS

PEERLESS Smartmount ST650 and assembly Leitfaden

PEERLESS

PEERLESS LWS410/BK Leitfaden

PEERLESS

PEERLESS Designer Series Leitfaden

Beliebte TV-Halterung Handbücher anderer Marken

Ergotron

Ergotron Neo Flex Cantilever UHD Bedienungsanleitung

StarTech.com

StarTech.com FPCEILBTB Bedienungsanleitung

VonHaus

VonHaus 05/038 Bedienungsanleitung

Techlink

Techlink ECHO TV Bedienungsanleitung

Sandstrom

Sandstrom SSTVMC12X Bedienungsanleitung

Sony

Sony SU-WL700 Leitfaden

ICW

ICW SCACC18 Bedienungsanleitung

LG WM-L640V Bedienungsanleitung

Gembird

Gembird WM-65ST-01 Bedienungsanleitung

ERARD

ERARD FiTUP XXL 035320 Bedienungsanleitung

Kanto

Kanto RCF180 Bedienungsanleitung

GEM

GEM GEM GP001 Bedienungsanleitung

Gladiator Joe

Gladiator Joe GJ0A0053 Bedienungsanleitung

Vivotek

Vivotek AM-105 Bedienungsanleitung

Vivo

Vivo VESA STAND-VAD1B Bedienungsanleitung

AmazonBasics

AmazonBasics B07QG3LMG4 Bedienungsanleitung

Secura

Secura QLF210 Bedienungsanleitung

Marquant

Marquant 929-083 Betriebsanleitung