Pelonis PFS45A5BBB Bedienungsanleitung

READ AND SAVE THESE INSTRUCTIONS

Attention: Pictures in the IM are for reference only.

OWNER’S MANUAL

Stand Fan

MODEL: PFS45A5BBB

1. This appliance has a polarized plug (one blade is wider than the

other). To reduce the risk of electric shock, this plug is intended

to fit in a polarized outlet only one way. If the plug does not fit

fully in the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician. Do not attempt to defeat this safety feature.

WARNING—

To reduce the risk of fire or electric shock, do not

use this fan with any solid-state speed control device.

3. This product employs overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation. If the fuse blows,

unplug the product from the outlet. Replace the fuse as per the

user servicing instructions (follow product marking for proper

fuse rating) and check the product. If the replacement fuse

blows, a short-circuit may be present and the product should be

discarded or returned to an authorized service facility for exami-

nation and/or repair.

a) “Do not operate any fan with a damaged cord or plug. Discard

fan or return to an authorized service facility for examination

and/or repair.”

b) “Do not run cord under carpeting. Do not cover cord with

throw rugs, runners, or similar coverings. Do not route cord

under furniture or appliances. Arrange cord away from traffic

area and where it will not be tripped over.”

4. Do not leave the fan running unattended.

5. Keep electrical appliances out of reach from children or infirm

persons. Do not let them use the appliances without supervision.

6. If the supply cord is damaged, it must be replaced by

manufacturer or its service agent or a similarly qualified person

in order to avoid a hazard.

IMPORTANT SAFETY INSTRUCTIONS

Read Rules for Safe Operation and Instructions Carefully.

Caution

WARNING

7. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play

with the appliance.

8. When the fan was assembled, the rotor blade guard shall not

be taken off anymore.

- Prior cleaning unplug the fan.

- The rotor guard shall not be dissembled/opened to clean the

rotor blades.

- Wipe the fan enclosure and rotor blade guard with a slightly

damp cloth.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

1. Never insert fingers, pencils, or any other object through the

grille when fan is running.

2. Disconnect fan when moving from one location to another.

3. Be sure fan is on a stable surface when operating to avoid

overturning.

4. DO NOT use fan in window, rain may create electrical hazard.

5. Household use only.

RULES FOR SAFE OPERATION

INSTALLATION INSTRUCTIONS

Name of components

Front and Rear Guard Installation

Lock nut

of grill

Lock nut of

blade

Blade

Locating Pin

Tight

Indentation

Buckle

Indentation

To make the fan oscillate, press the clutch knob located

on the top of the motor housing. To get the directional

airflow, pull the clutch knob up to its initial position.

2. Oscillation Control

To adjust the air flow upward or downward, push the

grilles lightly to the desired direction.

3. Tilt Adjustment

The height of the fan can be adjusted by loosening the

height adjustment ring, carefully carefully raising or

lowering the fan and firmly re-tightening the height adjustment ring.

4. Height Adjustment

Fig.1

OPERATING INSTRUCTION

“ ” MODE KEY

Press The M to select mode. The sequence is normal, natural ，sleep and ECO.

when this M being touched repeatedly or continuously，The light can indicate

mode state，It can also be controlled by remote control.

type changes in the sequence from NORMAL---NATURAL---SLEEP---ECO

---NORMAL wind when this key being touched repeatedly or kept in.

“ ” ON/OFF KEY

The key is for switching on the fan. The fan will be started.

Press the key again, it will be switched off.

“ ” TIMER KEY

“ ” SPEED KEY

1. Remote Controller (Fig.1)

When the TIMER key is touched repeatedly , the time to be set for

air delivery increased step by step .For instance, if the fan operation

is required to be set for 7hours, this key must be touched repeatedly

so that the pilot lamps for 1, 2and 4 hours lighten together.

It means that the set time is 1+ 2+ 4= 7hours. The time

setting indicated by the pilot lamp will decrease gradually by a unit of

1hour. Don’t press the TIMER key when the fan is required to operate

continuously. At the moment all pilot lamps don’t light.

When the fan runs at normal mode or ECO mode, press the “speed” repeatedly

to choose 5 different speeds ；When it runs under natural or sleep mode，press

the “speed” repeatedly to choose 3 different speed .

CONTROL PANEL

NO. Description

2 Air speed indicator

5 Mode

Timing display lamp

Natural mode indicator

7 Sleep mode indicator

BATTERY WARNING AS BELOW

Do not dispose of batteries in fire, batteries may

explode or leak.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium) batteries.

Pay attention to poles (+ and -) of the batteries.

Fig.2

NOTE

Use manganese or alkaline batteries of type "AAA". Do not use rechargeable

batteries.

Remote controller

AAA Battery,1.5v

Battery cover

Battery Compartment

OPERATING INSTRUCTION

8 Air speed

10 ON/OFF

Timing

ECO indicator

ECO mode

OPERATING INSTRUCTIONS

Time（H）lamps

11h

1h/2h

1h/4h

2h/4h

1h/2h/4h

When the TIMER key is touched repeatedly , the time to be set for air delivery

increased step by step .For instance, if the fan operation is required to be set for

7hours, this key must be touched repeatedly so that the pilot lamps for 1, 2and 4

hours lighten together. It means that the set time is 1+ 2+ 4= 7hours.

The time setting indicated by the pilot lamp will decrease gradually by a unit of 1

hour. Don’t press the TIMER key when the fan is required to operate continuously.

At the moment all pilot lamps don’t light.

When the fan runs at normal mode or ECO mode,

press the “speed” repeatedly to choose 5 different

speeds ；When it runs under natural or sleep mode，

press the “speed” repeatedly to choose 3 different

speed .

“ ” ON/OFF KEY

The key is for switching on the fan. The fan will be

started. Press the key again, it will be switched off.

“ ” TIME KEY

“ ” MODE KEY

“ ” SPEED KEY

Press The M to select mode. The sequence is normal,

natural , sleep and ECO. when this M being touched

repeatedly or continuously，The light can indicate

mode state，It can also be controlled by remote

control.

CONTROL PANEL

“ ” ECO KEY

Press this key to turn on ECO function or turn off it.

Indicator light

display

Gear

INSTRUCTIONS FOR USE

Instructions for operation of body

1. Grasp plug and remove from the receptacle or

other outlet device. Do not unplug by pulling

on cord.

2. Open fuse cover. Slide open fuse access

cover on top of attachment plug towards blades.

3. Remove fuse carefully. Insert the tip of your tool

into fuse slot (close with the terminal), then prize

the fuse gradually and slowly, but not overexert. If you feel tight, you can try it at

several times and prize the fuse little by little. When one side of the fuse has

been prized, then you can get the fuse out entirely.

4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that

should not be removed. Discard product if the attachment plug is damaged.

USER SERVICING INSTRUCTIONS

Notice:

1. When you replace the fuse, please don’t operate suddenly or overexert, or else

the product will be damage or cause accident.

2. When you feel it hard to be operated, please make sure you have got the right

way.

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed.

1. Before cleaning and assembling, fan must be unplugged.

2. To ensure adequate air circulation to the motor, keep vents at the rear of the

motor free of dust. Do not disassemble the fan to remove dust.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

4. Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use any of the following as a cleaner: gasoline, thinner.

5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.

Thoroughly remove soap film with dry cloth.

MAINTENANCE INSTRUCTION

Inhaltsverzeichnis

Andere Pelonis Lüfter Handbücher

Pelonis

Pelonis FS40-G5 Bedienungsanleitung

Pelonis

Pelonis FT30-8MBWV Bedienungsanleitung

Pelonis

Pelonis FS5-40A Bedienungsanleitung

Pelonis

Pelonis FB50-17H Bedienungsanleitung

Pelonis

Pelonis FW23-A1 Bedienungsanleitung

Pelonis

Pelonis FZ10-10JRH Bedienungsanleitung

Pelonis

Pelonis NTH15-17BRA Bedienungsanleitung

Pelonis

Pelonis FS40-19PRD Bedienungsanleitung

Pelonis

Pelonis FT30-A4 Bedienungsanleitung

Pelonis

Pelonis FT40-8HC Bedienungsanleitung

Pelonis

Pelonis FZ10-17JR Bedienungsanleitung

Pelonis

Pelonis PFT30T3ABB Bedienungsanleitung

Pelonis

Pelonis FS40-19M Bedienungsanleitung

Pelonis

Pelonis FW23-8HS Bedienungsanleitung

Pelonis

Pelonis FZ10-9HA Bedienungsanleitung

Pelonis

Pelonis FZ10-19JR Bedienungsanleitung

Pelonis

Pelonis PFT30T2ABB-V Bedienungsanleitung

Pelonis

Pelonis FS40-16JR Bedienungsanleitung

Pelonis

Pelonis FT30-14AU Bedienungsanleitung

Pelonis

Pelonis FZ10-19JR Bedienungsanleitung

Pelonis

Pelonis FS45-9L Bedienungsanleitung

Pelonis

Pelonis FT30-16J Bedienungsanleitung

Pelonis

Pelonis FS45-3ER Bedienungsanleitung

Pelonis

Pelonis FZ10-9HB Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung