Pepperl+Fuchs FC-GPCD-SDI16-PF Benutzerhandbuch

ISO9001

H-System

Isolated Barriers and

Termination Boards

System Manual

With regard to the supply of products, the current issue of the following document is applicable:

The General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central

Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most

recent version as well as the supplementary clause: "Expanded reservation of proprietorship"

Worldwide

Pepperl+Fuchs Group

Lilienthalstr. 200

68307 Mannheim

Germany

Phone: +49 621 776 - 0

E-mail: info@de.pepperl-fuchs.com

North American Headquarters

Pepperl+Fuchs Inc.

1600 Enterprise Parkway

Twinsburg, Ohio 44087

USA

Phone: +1 330 425-3555

E-mail: [email protected]m

Asia Headquarters

Pepperl+Fuchs Pte. Ltd.

P+F Building

18 Ayer Rajah Crescent

Singapore 139942

Phone: +65 6779-9091

E-mail: [email protected]

https://www.pepperl-fuchs.com

H-System – Isolated Barriers and Termination Boards

Contents

DOCT-0950R 2024-01

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Content of this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Target Group, Personnel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3 Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Isolated Barriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.3 Termination Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3 Mounting and Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1 Termination Board Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.2 Isolated Barriers Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.3 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.1 Configuration of the Isolated Barriers . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.2 Device Coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.1 Fault Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.2 Fault Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.3 Current and Voltage Standard Signals . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6 Dismounting, Maintenance, and Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.1 Isolated Barriers Dismounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.2 Termination Board Dismounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

7 Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.1 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.2 Model Number Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

7.3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

DOCT-0950R 2024-01

H-System – Isolated Barriers and Termination Boards

Contents

H-System – Isolated Barriers and Termination Boards

Introduction

DOCT-0950R 2024-01

1 Introduction

1.1 Content of this Document

This document contains information that you need in order to use your product throughout

the applicable stages of the product life cycle. These can include the following:

•Product identification

•Delivery, transport, and storage

•Mounting and installation

•Commissioning and operation

•Maintenance and repair

•Troubleshooting

•Dismounting

•Disposal

The documentation consists of the following parts:

•Present document

•Instruction manual

•Datasheet

Additionally, the following parts may belong to the documentation, if applicable:

•EU-type examination certificate

•EU declaration of conformity

•Attestation of conformity

•Certificates

•Control drawings

•Functional safety manual

•Additional documents

Note

This document does not substitute the instruction manual.

Note

For full information on the product, refer to the instruction manual and further documentation

on the Internet at www.pepperl-fuchs.com.

Note

For specific device information such as the year of construction, scan the QR code

on the device. As an alternative, enter the serial number in the serial number search

at www.pepperl-fuchs.com.

DOCT-0950R 2024-01

H-System – Isolated Barriers and Termination Boards

Introduction

1.2 Target Group, Personnel

Responsibility for planning, assembly, commissioning, operation, maintenance,

and dismounting lies with the plant operator.

Only appropriately trained and qualified personnel may carry out mounting, installation,

commissioning, operation, maintenance, and dismounting of the product. The personnel

must have read and understood the instruction manual and the further documentation.

Prior to using the product make yourself familiar with it. Read the document carefully.

1.3 Symbols Used

This document contains symbols for the identification of warning messages and of informative

messages.

Warning Messages

You will find warning messages, whenever dangers may arise from your actions.

It is mandatory that you observe these warning messages for your personal safety and in order

to avoid property damage.

Depending on the risk level, the warning messages are displayed in descending order

as follows:

Informative Symbols

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action

or a sequence of actions.

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants,

or result in their complete failure.

Note

This symbol brings important information to your attention.

H-System – Isolated Barriers and Termination Boards

Product Specifications

DOCT-0950R 2024-01

2 Product Specifications

2.1 Function

Isolated barriers are used to protect intrinsically safe circuits in explosive areas.

In addition to the required current, voltage and power limitation, the isolated barriers have

a galvanic isolation between the field circuit and the controller.

The H-System isolated barriers are mounted on termination boards. Pre-wiring is possible

on termination boards. To close the signal circuit, the isolated barriers are simply plugged in.

The isolated barriers can be replaced during live operation when the wiring is connected.

Figure 2.1 Generic H-System termination board with isolated barriers

Generic and control-system specific termination boards are available in the H-System.

Termination boards can be adapted to specific input/output requirements.

These requirements can be implemented via

•Various connecting plugs to the controller

•Various terminals to the field device

•A large selection of isolated barriers

DOCT-0950R 2024-01

H-System – Isolated Barriers and Termination Boards

Product Specifications

2.2 Isolated Barriers

H-System isolated barriers cover all functions and the interoperability of the H-System.

The pin assignment and terminal designations are consistent for all termination boards.

Each H-System isolated barrier can therefore be mounted in each termination board slot.

The termination board can be coded together with the isolated barriers. This prevents

the isolated barriers being mixed up on the termination board. The safety-relevant data

for the connected field devices is backed up.

Figure 2.2 HiC device housing (12.5 mm)

Transparent Front Flap

The isolated barriers have a transparent front flap.

Figure 2.3 Transparent front flap for KC and KF devices, example

This front flap has 2 functions:

•Protection of the device against electrostatic discharge

•Integrated label carrier for individual labeling, see chapter 2.2.3

PWR

HiC

2025

1 ch

Analog

Input

H-System – Isolated Barriers and Termination Boards

Product Specifications

DOCT-0950R 2024-01

2.2.1 Color Coding of the Isolated Barriers

The color coding of the devices has the following meaning:

Figure 2.4 Color identification of devices

1Digital input – switch amplifier with relay output

2Digital input – switch amplifier with transistor output

3Digital input – switch amplifier with transistor output and active voltage output for safety

sensors SN, S1N

4Digital output – solenoid driver, relay module

5Analog input – transmitter power supply, converter, repeater

6Temperature input – temperature converter

7Analog output – current driver

8Universal input/output – universal barrier

PWR

HiC

2025

PWR

HiC

2851

1ch

Digital

Input

STATUS

FAULT

PWR

HiC

2822

2ch

Digital

Input

CH1

PWR

HiC

2842

2ch

Digital

Input

CH1

CH2CH2

STATUS/

FAULT

STATUS/

FAULT

PWR

HiC

2441

1 ch

Analog

Input

1 ch

Universal

Input/

Output

PWR

HiC

2883

1 ch

Digital

Output

STATUS FA ULT

PWR

HiC

2031

1 ch

Analog

Output

PWR

FAULT

PROG

1 ch

Temp.

Input

HiC

2081

21 3 4 5 6 7 8

DOCT-0950R 2024-01

H-System – Isolated Barriers and Termination Boards

Product Specifications

2.2.2 Status Indications of the Isolators

LEDs are often used on isolators to indicate different statuses (e. g. for power supply,

device failure, status messages, binary switching states). Standard LED colors are assigned

to the status indication according to NAMUR NE44.

Figure 2.5 Example status indications

LED Display function Display Meaning

Green LED Power supply On Power supply OK

Off No power supply or insufficient power supply – device

faulty

Red LED Device fault, device

failure On Internal fault signal, failure signal – fault/failure display

of causes detected inside the device, device needs

replacing

Line fault Flashing External fault signal, failure signal – fault/failure display

of causes detected outside the device, inspection and

elimination of fault required

No fault Off No malfunction, device is operating properly

Yellow LED Switching states of

binary inputs and

outputs

On Possible causes of the output:

•The relay is energized.

•The NO contact (also a change-over contact)

is actively closed.

•The open collector is switched through.

•The switching voltage generated inside the device

is applied.

Possible causes of the input:

•A binary switching signal is present.

•An analog limit value is reached.

Off Possible causes of the output:

•The relay is de-energized.

•The NO contact (also a change-over contact)

is actively opened.

•The open collector is not switched through.

•The switching voltage generated inside the device

is not applied.

Possible causes of the input:

•A binary switching signal is present.

•An analog limit value is reached.

Table 2.1 Meaning of status indications

1Green LED PWR

Power supply status indication

2Yellow LED STATUS

Switching state of the output

3Red LED FAULT

Lead breakage and short circuit status indication

PWR

STAT US

FAULT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pepperl+Fuchs Industrieelektrik Handbücher

Pepperl+Fuchs

Pepperl+Fuchs H-System Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs SIL KCD2-SCS-Ex2.SP Benutzerhandbuch

Pepperl+Fuchs

Pepperl+Fuchs IQT-18GM-R4-V1-Y911215 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs KCD2-SCD-Ex1.ES.SP Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs KFD0-SD2-E 1.1045 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs H-System Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs 6000 SERIES Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs K-System Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs F-FT-EX1.I.IEC Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs LS680-DA Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs Bebco EPS 5500 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs HiC5861 Benutzerhandbuch

Pepperl+Fuchs

Pepperl+Fuchs EI-0D2-10Y-10B Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs KCD0-RSH-1.1D.4 Benutzerhandbuch

Pepperl+Fuchs

Pepperl+Fuchs KFD0-TR-1 Benutzerhandbuch

Pepperl+Fuchs

Pepperl+Fuchs PCV-F200-SSI-V19 Series Bedienungsanleitung

Beliebte Industrieelektrik Handbücher anderer Marken

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Technisches Handbuch

Abtech

Abtech HVJB Series Leitfaden

Murata

Murata GRM0335C1H8R1DA01 Series Bedienungsanleitung

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Bedienungsanleitung

Eaton

Eaton Ulusoy HMH24-04 Bedienungsanleitung

Newlong

Newlong NP-7H Bedienungsanleitung

Murata

Murata GJM0335C1E4R4BB01 Series Bedienungsanleitung

Stahl

Stahl 8575/12 Bedienungsanleitung

SI Pegasus Bedienungsanleitung

Murata

Murata GRM1555C1H2R7CA01 Seies Bedienungsanleitung

Murata

Murata GRM0225C1E6R4BA03 Series Bedienungsanleitung

Cooper Power Systems

Cooper Power Systems VXE15 Bedienungsanleitung

S&C

S&C Vista SD Bedienungsanleitung

Murata

Murata GRM0335C2A7R3CA01 Series Bedienungsanleitung

Siemens

Siemens 3VA9988-0BM10 Bedienungsanleitung

Siemens

Siemens SITRANS LVS100 Bedienungsanleitung

Murata

Murata GRM32ER60G227ME05 Series Bedienungsanleitung

Siemens

Siemens SENTRON SUPERSWITCH 3KL82 Series Bedienungsanleitung