PFS KP5513 Bedienungsanleitung

11785 SE Highway 212 – Suite 305

Clackamas, OR 97015-9050

(503) 650-0088

WWW.PFSTECO.COM

United States Stove

Company

Project # 21-735

Model: KP5513

Additional Models: KP5513-P, KP5513-L,

US5513, US5513-P, US5513-L, AP5613,

AP5613-P, AP5613-L, VG5713,

VG5713-P, VG5713-L, Little E (SP500),

5501S-XH

Type: Pellet-Fired Room Heater

December 21, 2021

ASTM E2779 Standard Test Method for

Determining Particulate Matter Emissions

from Pellet Heaters

Contact: Mr. John Voorhees

227 Industrial Park Road

South Pittsburg, TN 37380

john.voorhees@usstove.com

(423) 837-2100

Prepared by: Sebastian Button,

Laboratory Supervisor

Project # 21-735 Model: KP5513

Page | 1

This page intentionally left blank.

Project # 21-735 Model: KP5513

Page | 2

Contents

Affidavit ......................................................................................................................................................... 3

Introduction ................................................................................................................................................... 4

Notes ......................................................................................................................................................... 4

Pellet Heater Identification and Testing ........................................................................................................ 5

Test Procedures and Equipment .................................................................................................................. 6

Results .......................................................................................................................................................... 7

Summary Table ......................................................................................................................................... 7

Test Run Narrative .................................................................................................................................... 8

Run 1 ..................................................................................................................................................... 8

Test Conditions Summary ............................................................................................................................. 8

Appliance Operation and Test Settings .................................................................................................... 8

Settings & Run Notes ................................................................................................................................ 8

Appliance Description ................................................................................................................................... 9

Appliance Dimensions ............................................................................................................................... 9

Test Fuel Properties .................................................................................................................................... 12

Pellet Fuel Analysis ................................................................................................................................. 13

Sampling Location and Descriptions ........................................................................................................... 14

Photos ..................................................................................................................................................... 14

Sampling Methods ...................................................................................................................................... 15

Analytical Methods Description ................................................................................................................... 15

Calibration, Quality Control and Assurances .............................................................................................. 15

Appliance Sealing and Storage ................................................................................................................... 15

Sealing Label .......................................................................................................................................... 15

Sealed Unit .............................................................................................................................................. 16

List of Appendices ....................................................................................................................................... 17

Project # 21-735 Model: KP5513

Page | 3

Affidavit

PFS-TECO was contracted by United States Stove Company to provide testing services

for the KP5513 Pellet-Fired Room Heater per ASTM E2779, Determining PM Emissions

from Pellet Heaters. All testing and associated procedures were conducted at PFS-

TECO’s Portland Laboratory on 12/2/2021. PFS-TECO’s Portland Laboratory is located

at 11785 SE Highway 212 – Suite 305, Clackamas, Oregon 97015. Testing procedures

followed ASTM E2779. Particulate sampling was performed per ASTM E2515, Standard

Test Method for Determination of Particulate Matter Emissions Collected by a Dilution

Tunnel.

PFS-TECO is accredited by the U.S. Environmental Protection Agency for the certification

and auditing of wood heaters pursuant to subpart AAA of 40 CFR Part 60, New Source

Performance Standards for Residential Wood Heaters and subpart QQQQ of 40 CFR

Part 60, Standards of Performance for New Hydronic Heaters and Forced Air Furnaces,

Methods 28R, 28WHH, 28 WHH-PTS, and all methods listed in Sections 60.534 and

60.5476. PFS-TECO holds EPA Accreditation Certificate Numbers 4 and 4M (mobile).

PFS-TECO is accredited by IAS to ISO 17020:2012 “Criteria for Bodies Performing

Inspections”, and ISO 17025:2005 “Requirements for Testing Laboratories.” PFS-TECO

is also accredited by Standards Council of Canada to ISO 17065:2012 “Requirements for

Bodies Operating Product Certification Systems.”

The following people were associated with the testing, analysis and report writing

associated with this project.

Sebastian Button, Laboratory Supervisor

Project # 21-735 Model: KP5513

Page | 4

Introduction

United States Stove Company of South Pittsburg, TN, contracted with PFS-TECO to

perform EPA certification testing on KP5513 Pellet-Fired Room Heater. All testing was

performed at PFS-TECO’s Portland Laboratory. Testing was performed by Mr. Sebastian

Button.

Notes

• Prior to start of testing, 50 hours of conditioning was performed at a medium burn

setting per ASTM E2779

• Prior to start of testing, the dilution tunnel was cleaned with a steel brush.

• Filters were changed on sample train A at one hour after the test began.

• A single, integrated test run, in accordance with ASTM E2779 was performed:

o 1 Hour at Maximum Burn Setting

o 2 Hours at Medium Burn Setting (Defined as <50% of Maximum Burn Rate)

o 3 Hours at Minimum Burn Setting

Project # 21-735 Model: KP5513

Page | 5

Pellet Heater Identification and Testing

• Appliance Tested: KP5513

• Serial Number: CH1026-36

• Manufacturer: United States Stove Company

• Catalyst: No

• Heat exchange blower: Integral

• Type: Pellet Stove

• Style: Free Standing

• Date Received: Thursday, November 18, 2021

• Testing Period – Start: Thursday, December 02, 2021 Finish: Thursday,

December 02, 2021

• Test Location: PFS-TECO Portland Laboratory, 11785 SE HWY 212 - Suite

305, Clackamas, OR 97015

• Elevation: ≈131 Feet above sea level

• Test Technician(s): Sebastian Button

• Observers: N/A

Project # 21-735 Model: KP5513

Page | 6

Test Procedures and Equipment

All Sampling and analytical procedures were performed by Sebastian Button. All

procedures used are directly from ASTM E2779 and ASTM E2515. See the list below for

equipment used. See Appendix C submitted with this report for calibration data.

Equipment List:

Equipment ID#

Equipment Description

190

Mettler Toledo 3'x3' floor scale w/digital weight indicator

129

APEX XC-50-DIR Digital Emissions Sampling Box A

130

APEX XC-50-DIR Digital Emissions Sampling Box B

055

APEX Ambient sampling box

187

California Analytical ZRE CO2/CO/O2 IR ANALYZER

064

Digital Barometer

109A/B

Troemner 100mg/200mg Audit Weights

107

Sartorius Analytical Balance

097

10 lb audit weight

095

Anemometer

111

Microtector

91005049

Gas Analyzer Calibration Span Gas

CC170624

Gas Analyzer Calibration Mid Gas

Project # 21-735 Model: KP5513

Page | 7

Results

The integrated test run emission rate for test Run 1 was measured to be 1.5 g/hr with a

Higher Heating Values efficiency of 76% and a CO emission rate of 0.5 g/min. The

calculated first hour particulate emission rate was 2.4 g/hr. The United States Stove

Company Model KP5513 Pellet-Fired Room Heater meets the 2020 PM emission

standard of ≤ 2.0 g/hr per CFR 40 part 60, §60.532 (b).

Detailed individual run data can be found in Appendix A submitted with this report.

Summary Table

EPA Application Table

Run

Number

Date

Segments

Run

Time

(min)

Heat

Output

(BTU/hr)

1st Hr

Emissions

(g/hr)

Integrated

Total (g/hr)

Emissions

(g/min)

Overall CO

Emissions

(g/min)

Heating

Efficiency

(%HHV)

Overall

Heating

Efficiency

(%HHV)

Setting

12/2/2021

1.69

24676

2.4

1.5

0.4

0.5

79%

76%

0.79

120

11193

0.1

76%

0.75

180

10609

0.1

76%

0.92

360

42471

0.5

76%

Project # 21-735 Model: KP5513

Page | 8

Test Run Narrative

Run 1

Run 1 was performed on 12/2/2021 as an attempted integrated test run per ASTM E2779.

The overall test duration was 360 minutes. The particulate emissions rate for the

integrated test run was 1.5 g/hr. The run had an overall HHV efficiency of 76%. Sample

train A was changed at 1 hr. All test results were appropriate and valid and the burn rate

requirement for the integrated test run were achieved. There were no anomalies and all

criteria were met.

Test Conditions Summary

Testing conditions for all runs fell within allowable specifications of ASTM E2779 and

ASTM E2515. A summary of facility conditions, fuel burned, and run times is listed below.

Runs

Ambient (°F)

Relative

Humidity (%)

Average

Barometric

Pressure

(In. Hg.)

Preburn

Fuel

Weight

(lbs)

Test Fuel

Weight

(lbs)

Test Fuel

Moisture

(%DB)

Test Run

Time

(Min)

Pre

Post

Pre

Post

50.7

49.6

30.18

4.3

12.9

6.13

360

Appliance Operation and Test Settings

The appliance was operated according to procedures as described in the Operations

Manual, found in Appendix B submitted with this report. Detailed run information can be

found in Appendix A submitted with this report.

Settings & Run Notes

Pre-Burn

Test Run

Run 1

Heat Setting #5

High Segment: Heat Setting #5

Medium Segment: Heat Setting #1

Low Segment: Heat Setting #1

Project # 21-735 Model: KP5513

Page | 9

Appliance Description

Model(s): KP5513

Additional Models Discussion: This model is offered under a variety of different

branding designations under the following model numbers: KP5513-P, KP5513-L,

US5513, US5513-P, US5513-L, AP5613, AP5613-P, AP5613-L, VG5713, VG5713-P,

VG5713-L, Little E (SP500), and 5501S-XH. The various models are identical in all

aspects with the exception of the brand names.

Appliance Type: Pellet-Fired Room Heater

Air Introduction System: Air enters the burn chamber by being pulled though the firepot,

via the exhaust blower, see air flow diagram in Appendix D.

Combustion Control: Feed rate is electronically controlled via user-selectable controls.

Baffles: N/A

Flue Outlet: 3-inch exhaust outlet located on the bottom/rear of the appliance, with an

optional adapter piece to convert to 6-inch venting.

Appliance Dimensions

KP5513 Dimensions

Height

Width

Depth

29.5”

18.5”

21”

Appliance design drawings can be found in Appendix D submitted with the CBI copy of

this report.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PFS Werkzeuge Handbücher

PFS

PFS GB267 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung