PhaseOne XF V-Grip Bedienungsanleitung
XF V-Grip
Quick Guide
XF V-Grip |
2
| XF V-Grip
3
Overview – Buttons, Dials and Parts 4
Supplied content and accessories 6
Mounting the XF V-Grip 7
Adjusting the Quick Release 10
Attaching the Hand Strap 12
Using Buttons and Dials 14
Content | XF V-Grip Quick Guide
XF V-Grip | Overview – Buttons, Dials and Parts
4
Clamp Distance
Adjustment Knob
Quick Release Latch
Electronic Contacts
V-Grip Shutter Button
V-Grip Front Dial
Overview – Buttons, Dials and Parts | XF V-Grip
5
V-Grip Side Dial
V-Grip Rear User Buttton
Quick Release Safety Switch
Tripod Mount Socket
Hand Strap Mount
XF V-Grip | Supplied content
6
Supplied content and accessories
Pin
Tube
XF V-Grip
Hand Strap
Screwdriver
Disc
Quick Release
Adaptor
L-Bracket
Thread
Mounting the V-Grip | XF V-Grip
7
Mounting the XF V-Grip
The XF V-Grip is designed with a quick
release system that makes it quick and
easy to add or remove the grip from
the XF camera body when necessary.
The design incorporates an Arca-Swiss
compatible mounting adaptor and
L-Bracket, making it easy to mount the
XF camera body on a tripod in both
portrait and landscape position.
Warning: Releasing the dual-action quick release of the
XF V-Grip while not supporting the XF camera body
may result in dropping the camera. The quick release
of the XF V-Grip has a dual-action button, which
functions as a security lock. Releasing the security
lock alone will not allow the quick release to open — it
requires a deliberate open action to release the V-Grip
from the XF camera body. Mounting and releasing the
V-Grip with the quick lock requires two hands, and it
is advisable to locate a surface to rest the camera on
while mounting the XF camera body.
Instructions on next page
XF V-Grip | Mounting the V-Grip
8
Use the supplied disc to remove
the 1/4” - 3/8” thread adapter
screw from the XF camera body’s
tripod socket by turning it
counterclockwise.
Use the supplied screwdriver and
remove the small retaining screw
from the tripod mounting socket
of the XF camera body. Make sure
to store the screw a safe place, as
you will need it again if you want
to secure the tripod thread
adapter later on.
Remove the rubber cover from the
electronic contacts by gently
prying it from its recess.
2
Place the supplied quick release
adapter or L-Bracket over the
tripod mount so that the screw
and pins align with the holes in the
XF camera body. Tighten the
screw by placing it in the groove
and turning the head clockwise.
Mounting the V-Grip | XF V-Grip
9
Press the V-Grip against the XF
camera and turn the quick release
latch 90 degrees up in order to
lock the V-Grip securely into
place. Please make sure that the
safety switch locks correctly with
a tactile click.
Make sure that the quick release
on the V-Grip is open. The latch
should point 90 degrees out from
the grip. Place the V-Grip on the
bracket on the XF camera body so
it aligns with the XF hand grip and
the contact pins integrates well
into the connector recession.
To remove the V-Grip, first press
the top of the quick release hatch
towards the front (1) Then push
the quick release safety switch
towards the top of the grip with
your thumb. (2) Then use your
index finger to flip the quick
release latch 90 degrees out from
the V-Grip. Remove the V-Grip.
Use the supplied disc or a coin to
securely fasten the quick release
adapter or L-Bracket, turning it
clockwise.
12
3
XF V-Grip | Adjusting the Quick Release
10
Adjusting the Quick Release
The Quick Release is adjusted to connect correctly and
exhibit accurate tension from the factory.
Over time, however, the locking mechanism may become
slightly loose with repetitive use.
You can easily adjust this tension by turning the clamp
adjustment knob clockwise with your thumb. This is best
done by placing the V-Grip firmly in the correct position
on the XF Camera Body and locking the Quick Release.
You can then turn the clamp adjustment knob clockwise
as tight as possible using your thumb.
In a similar fashion, you can loosen the tension of the
Quick Release by turning the clamp adjustment knob
counterclockwise.
If the tension of the Quick Release appears too tight,
please refer to next page for a complete re-adjustment. It
is recommended that you do not use excessive force when
locking the Quick Release.
Front Side Quick Release
Adjustment Knob
+
-
Inhaltsverzeichnis
Andere PhaseOne Kamerazubehör Handbücher
PhaseOne
PhaseOne H 5 Bedienungsanleitung
PhaseOne
PhaseOne PAS 150 Bedienungsanleitung
PhaseOne
PhaseOne RP1-2300 Bedienungsanleitung
PhaseOne
PhaseOne PhotoPhase Bedienungsanleitung
PhaseOne
PhaseOne PAS Pana Bedienungsanleitung
PhaseOne
PhaseOne iX Bedienungsanleitung
PhaseOne
PhaseOne H 25 Bedienungsanleitung
PhaseOne
PhaseOne PhotoPhase 85280002 Bedienungsanleitung
PhaseOne
PhaseOne P+ Series Bedienungsanleitung
PhaseOne
PhaseOne FlexAdaptor Bedienungsanleitung
