Phcbi LabSVIFT MTR-IOTWE1 Bedienungsanleitung
Operating Instructions
LabSVIFT Transmitter
MTR-IOTWE1
Please read the operating instructions carefully before using this product, and keep the operating
instructions for future use.
2
CONTENTS
INTRODUCTION...............................................................................................................................3
SAFETY PRECAUTIONS .................................................................................................................4
FCC/ICES Statements ......................................................................................................................8
Trademarks .......................................................................................................................................8
Required PC Environment for Settings. ............................................................................................8
System Configuration Diagram .........................................................................................................9
Unit Part Names of the Unit ............................................................................................................13
Bundled Items .................................................................................................................................14
Optional Items .................................................................................................................................14
Installation flow................................................................................................................................15
Part 1 : Connect Transmitter to Power supply with AC adaptor................................................15
Part 2 : PC network settings .....................................................................................................16
Part 3 : Transmitter network settings ........................................................................................17
Part 4 : Install Transmitter on Laboratory equipment................................................................23
Part 5 : Connect Transmitter to a power supply........................................................................30
Part 6 : Insert batteries into Transmitter....................................................................................32
Part 7 : Register Transmitter in Web Service Application .........................................................35
Part 8 : Other Items ..................................................................................................................36
LED lighting specifications ..............................................................................................................39
Notice for power failures .................................................................................................................40
DISPOSAL OF UNIT (Decontamination of unit)..............................................................................40
Mount Digital PT sensor / Digital Thermistor sensor/ Analog converter (Optional) .........................41
Installation Notice for Optional modules..........................................................................................43
TROUBLE SHOOTING ...................................................................................................................44
SPECIFICATIONS...........................................................................................................................45
Option Digital PT sensor specifications ....................................................................................46
Option Digital Thermistor sensor specifications........................................................................46
Option Analog converter specifications.....................................................................................47
Open Source SOFTWARE on LabSVIFT Transmitter.....................................................................48
Safety check sheet..........................................................................................................................49
3
INTRODUCTION
■Read the operating instructions carefully before using the product and follow the
instructions for safe operation.
■PHC Corporation takes no responsibility for safety if the product is not used as intended
or is used with any procedures other than those given in the operating instructions.
■Keep the operating instructions in a suitable place so that they can be referred to as
necessary.
■The operating instructions are subject to change without notice for improvement of
performance or function.
■Contact our sales representative or agent if any page of the operating instructions is
missing or the page order is incorrect, or if the instructions are unclear or inaccurate.
■No part of the operating instructions may be reproduced in any form without the express
written permission of PHC Corporation.
■The operating instructions are only for LabSVIFT Transmitter MTR-IOTWE1 made by
PHC Corporation.
IMPORTANT NOTICE
PHC Corporation guarantees this product under certain warranty conditions. However,
please note that PHC Corporation shall not be responsible for:
●Any loss or damage to the contents of the monitored product
●Any indirect damage caused by data damage or loss
<Intended Use>
This equipment is designed for monitoring laboratory equipment.
Do not use for Medical device.
4
SAFETY PRECAUTIONS
Be sure to observe the operating instructions as they contain important safety advice.
For correct and safe use of the product, follow the precautions and procedures in this operating
instruction carefully. Failure to do so could result in injury or damage to the product.
Precautions are illustrated in the following way:
The following symbols are used in this document and some of them are attached to the unit.
Actions are prohibited.
The illustration in the circle and the description adjacent to the symbol provide
detailed information about the action which is prohibited.
Actions are mandatory.
The illustration in the circle and the description adjacent to the symbol provide
detailed information about the action to be taken.
Caution must be taken.
The description adjacent to the symbol provides detailed information about the
caution to be taken.
Read the operating instructions carefully before using the product.
WARNING
Warning indicates a potentially hazardous situation which, if not avoided, could
result in serious injury or death.
CAUTION
Failure to observe CAUTION signs could result in injury to personnel and damage
to the unit and associated property.
5
Installation
Do not use the unit outdoors.
Exposure to rain may cause an electric leakage and/or an electric shock.
Do not install the unit in a location where flammable or volatile
substances are present.
Installing the unit in such a location may cause explosions and/or a fire.
Do not install the unit in a location where there are high levels of moisture
or where it may be splashed with water.
This may cause the insulation to deteriorate, leading to an electric leakage
and/or an electric shock.
Do not install the unit in a location where corrosive gases such as acids
are present.
Deterioration of the insulation due to corrosion of the electric components may
cause an electric leakage or an electric shock.
Do not leave the plastic bags used for packing in a place where they can
be reached by small children.
This may result in unexpected accidents such as suffocation.
Do not use this device close to a pacemaker user.
Radio waves from this device may affect the operation of pacemakers.
Before mounting various sensors to a refrigerator or an incubator, stop
the operation of the refrigerator.
Accidental contact with electrical components inside the refrigerator may cause
electric shock or injury.
Investigate the environment to use Transmitter beforehand.
It will effect to some other device or be affected by using the same frequency
band with others. Refer to Page 45 for CHs which Transmitter uses.
Do not install equipment that can be a source of noise, such as
electrical equipment using the ISM frequency band (2.4, 5.8 GHz), near
the unit.
Radio waves from such equipment may cause malfunction.
This unit is not suitable for use where children may be present.
Unexpected accidents may occur.
WARNING
6
SAFETY PRECAUTIONS
AC Adaptor (When using AC Adaptor as Power supply)
Never damage the AC Adaptor (by breaking, adapting, placing near a
source of heat, bending with force, twisting, pulling, adding weight, or
binding).
The power plug may cause an electric shock, a short circuit, or a fire. Contact
our sales representative or agent for repairing the cord and plug.
Do not place this unit or other equipment in a position where it is difficult
to disconnect the AC Adaptor.
Failure to disconnect the AC Adaptor may cause a fire in the event of a
problem or malfunction.
Do not plug or unplug the AC Adaptor with wet hands.
This may cause an electric shock.
Remove dust from the AC Adaptor periodically.
Dust on the AC Adaptor may lead to an insulation failure due to moisture and
thus cause a fire. Disconnect the AC Adaptor and wipe it with a dry cloth.
Make sure the power supply plug of the AC Adaptor is pushed fully in.
Faulty insertion of the power supply plug may cause an electric shock or a fire
due to generation of heat. Never use a damaged power supply plug or loose
power outlet.
Grip the AC Adaptor when disconnecting it from the outlet.
Pulling the cord of the AC Adaptor may cause an electric shock or a short
circuit.
Disconnect the AC Adaptor when the unit is not in use for long periods.
Keeping the unit connected may cause an electric shock, an electric leakage,
or a fire due to the deterioration of insulation.
Before proceeding with maintenance or checking the unit, disconnect the
AC Adaptor.
Performing the work while power is still being supplied to the product or while
the AC Adaptor is still connected may cause an electric shock and/or injury.
WARNING
7
When something is wrong with the unit
Never disassemble, repair, or modify the unit yourself.
Any work carried out by unauthorized personnel may result in an electric shock.
Contact our sales representative or agent for maintenance or repair.
Disconnect the power supply if something is wrong with the unit.
If the unit keeps running under such conditions, there may be a risk of an
electric shock or a fire. Contact our sales representative or agent immediately
for maintenance or repair. ( AC Adaptor or USB cable is selected for the
power supply depending the insulation site. )
Use designated parts for parts replacement.
Using an incorrect part may cause a fire.
When using the unit
Never insert metal objects such as pins and wires into any gap on the unit.
This may cause a malfunction.
Never splash water directly onto the unit.
This may cause an electric shock or short circuit.
When storing and disposing of the unit
Ask a qualified contractor to carry out disassembly/disposal of the unit
and do not leave the unit in a location that can be accessed by third
parties.
This may result in unexpected accidents (e.g. the unit may be used for
unintended purposes)
Before disposing of the unit with biohazardous danger, decontaminate the
unit to the extent possible by the user.
WARNING
8
FCC/ISED/ICES Statements
(FCC)
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
(ISED)
This device contains licence-exempt transmitter/receiver that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
1．This device may not cause interference.
2．This device must accept any interference, including interference that may cause
undesired operation of the device.
(ICES-003)
CAN ICES-003(B) / NMB-003(B)
Trademarks
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
The official name of Windows® is Microsoft® Windows® Operating System.
Windows and Microsoft Edge are registered trademarks of Microsoft Corporation in the United
States and other countries.
Required PC Environment for Settings
The screen may not be displayed correctly or may not be available depending on the settings
of the browser or an environment other than the recommended environment.
(Recommended environment of a PC for settings)
PC OS:
Web browser:
Windows 10
Microsoft Edge
9
System Configuration Diagram
Laboratory equipment are classified into 3 groups according to the method of getting monitoring
data.
Gen.3 : PHC products which support LabSVIFT transmitter (hereinafter referred to as
Transmitter) functions and don’t support RS-485 function.
Example : MDF-DU503VH/DU703VH
Gen.2 : PHC products which have RS-485 functions and don’t support Transmitter functions.
Example : MPR-S500H/S500RH
Gen.1 : Products which don’t support both Transmitter and RS-485 function.
Example : MDF-U731M Third party products
Transmitter uses appropriate configurations for each group product as following pages.
Transmitter gets monitoring data and transfer them to LabSVIFT WebSERVICE by Wi-Fi or LAN
transmission.
The IT transmission Port and Protocol are necessary for transmission with the
LabSVIFT WebSERVICE.
・Port (Protocol): TCP 443 (HTTPS) or TCP 8883 (MQTT over TLS) must be
enabled and used.
・NTP Server must be enabled and used.
About these details, contact a facility manager of the place where Transmitter
is installed. WebService operations, refer to the LabSVIFT Web Service
instruction manual.
Wi-Fi or LAN transmission methods may cause communication errs due to
those conditions. And in those cases, data transmission errs may happen.
10
System Configuration Diagram
Gen.3 : Transmitter uses USB function to communicate with Gen.3 , and can get a power
supply via a connected USB cable from them.
It cannot communicate Gen.3 with RS-485 function.
With Gen.3 , Transmitter can get the following data. (these are examples)
USB transmission -> Getting equipment’s data. (temperature, door open/close data, internal
setting data, mechanic condition data etc.)
Digital sensor -> Getting the equipment’s internal temperature or Ambient one.
Analog converter -> Getting DC level from another measuring equipment.
The below is the example installation of Transmitter with MDF-DU503VH/DU703VH.
Note: Gen.3 products equipment don’t need AC adaptor to get a power supply.
Wi-Fi or LAN
transmission
LabSVIFT
WebSERVICE
Digital temp. sensor
Analog converter
USB cable
Inhaltsverzeichnis
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
