Philips SWW1810 Bedienungsanleitung

www.philips.com/welcome

SWW1810

EN User manual 3

ES Manual del usuario 21

FR Mode d’emploi 41

UYYAAWOA'0KPFF 

UYYAAWOA'0KPFF 

Contents

1 Important 4

Safety 4

2 YourWireless HD AV Connect 6

What is in the box 6

3 Overview 7

The transmitter 7

The receiver 7

The remote control 8

4 Installation 9

Connect the transmitter to your HD devices 9

Connect the receiver to the HDTV set 9

Connect the IR blaster and IR sensor

extender cables 10

Install remote control batteries 10

5 Activate yourWireless HD AV

Connect and set up the link 11

Turn on the power of your HDTV 11

Activate the wireless link 12

6 Mount your receiver 13

Mount your receiver on the wall 13

Mount your receiver on the back of the

HDTV 14

7 Technical data 15

Supported resolution 15

 15

8 Notice 16

Notice for USA 16

Notice for Canada 16

Recycling 17

Disposal of your old product and batteries 17

OneYear Limited Warranty 17

9 Frequently asked question 18

English

UYYAAWOA'0KPFF 

eDo not use this apparatus near water.

fClean only with dry cloth.

gDo not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

hDo not install near any heat sources such

as radiators, heat registers, stoves, or



produce heat.

iDo not defeat the safety purpose of

the polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third grounding

prong.The wide blade or the third prong

are provided for your safety. If the provided



an electrician for replacement of the

obsolete outlet.

jProtect the power cord from being

walked on or pinched, particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

k 

by the manufacturer..

lUse only with the cart, stand, tripod,



manufacturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

mUnplug this apparatus during lightning

storms or when unused for long periods of

time.

1 Important

Safety

This ‘bolt of lightning’ indicates uninsulated

material within your unit may cause an electrical

shock.

The ‘exclamation mark’ calls attention to

features for which you should read the enclosed

literature closely to prevent operating and

maintenance problems.

Warning

 

apparatus should not be exposed to rain or moisture



be placed on this apparatus.

Caution

 To prevent electric shock, fully insert the plug. (For

regions with polarized plugs:To prevent electric shock,



Important Safety Instructions

aRead these instructions.

bKeep these instructions.

cHeed all warnings.

dFollow all instructions.

UYYAAWOA'0KPFF 

n 



the apparatus has been damaged in any

way, such as power-supply cord or plug



objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

oBattery usage CAUTION –To prevent

battery leakage which may result in bodily

injury, property damage, or damage to the

unit:

 Do not mix batteries (old and new or



 Remove batteries when the unit is not

used for a long time.

pApparatus shall not be exposed to

dripping or splashing.

qDo not place any sources of danger on the





Warning

 Use only the provided power adapter.

English

UYYAAWOA'0KPFF 

HDMI cable

IR blaster extender cable

Power adapter for the transmitter and receiver

x 2

IR sensor extender cable

Anchors x 2 Screws x 2

Quick Installation Guide

Adhesive tape x 2 Quick start guide

User manual

2 Your Wireless

HD AV Connect

Congratulations on your purchase and welcome

to Philips!



offers, register your product at www.philips.

com/welcome.

What is in the box

Note

 Make sure you have all these items in the box. Contact

your dealer for any missing or damaged items.

Transmitter

Receiver

Remote control

UYYAAWOA'0KPFF 

The receiver

Top view

1 Source LEDs Indicators for HDMI1

and HDMI2

2 Power

button with

the LED

indicator

Press to turn the receiver

on/off.

3 Source

button

Press to select the

source input.

Rear view

1DC IN

jack

Connect the power adapter

of the receiver.

2HDMI

OUT

adapter

Connect the HDTV with an

HDMI cable.

3IR IN jack Plug in the IR sensor

extender cable.

3 Overview

The transmitter

Front view

1 Source LEDs It displays the current

source input.

2SOURCE

button

Press to switch the

source input of the

transmitter.

3 Power button

with the LED

indicator

Press to turn the

transmitter on/off

Rear view

POWER

1DC IN jack Connect the power

adapter of the transmitter.

2 & 3 HDMI IN

adapters

Connect the HD audio/

video device with the

HDMI cables.

4IR OUT

blaster

extender

jack

Plug in the IR blaster

extender cable.

English

UYYAAWOA'0KPFF 

The remote control

1POWER

button

Press to turn the

transmitter and receiver

on/off.

2INFO

button

Displays on the HDTV

the connection status of

the receiver.

3IR

button

Press to switch the IR





source device.

4SOURCE

button

Press to switch the

audio/video source

inputs connected to the

transmitter.

The Wireless HD AV Connect gives you a total

wireless solution to place your HDTV set or

projector anywhere you want.The transmitter

can transmit an uncompressed video content

over 65 feet without latency.The receiver can

receive signals for viewing on your HDTV. All

you need to do is to:

 Connect the transmitter to your HD

devices. Examples of HD devices are

satellite, cable, ADSL set-top box, blu-ray,

DVD player and game console.

 Connect the receiver to your HDTV set.

 Control the transmitter with the remote

control.

UYYAAWOA'0KPFF 

2Connect the supplied power adapter to

the transmitter.

 Connect one end of the power

adapter to the DC IN jack of the

transmitter. Connect the other end of

the power adapter to a power socket.

 The power button of the transmitter

is lit in solid blue and turns red in

standby mode.

Connect the receiver to the

HDTV set

DC 5V

HDMI OUT IR IN

HDMI IN

1Connect the receiver with an additional



 Connect one end of the HDMI cable

to the receiver.

 Connect the other end to the HDMI

IN connector of your HDTV.

2Connect the supplied power adapter to

the receiver:

 Connect one end of the power

adapter to the DC IN jack of the

receiver.

 Connect the other end of the power

adapter to a power socket.

 The power button of the receiver is lit

in solid blue and turns red in standby

mode.

4 Installation

Connect the transmitter to

your HD devices

You can connect two audio/video sources to

the transmitter at the same time, but only one

source can be selected and played.

1Connect the audio/video source to the

transmitter using the supplied HDMI cable.

 Connect one end of the HDMI cable

to the HDMI IN connector of the

transmitter.

Note

 There are two HDMI IN adapters but only one HDMI

cable is supplied.To connect to two audio/video

sources to the transmitter at the same time, you need

an additional HDMI cable.

 Connect the other end of the HDMI

cable to the HDMI OUT connector of

the video source.

English

UYYAAWOA'0KPFF 

5Extend and stick the IR sensor extender

cable onto the front side of your HDTV.

Note

 The IR blaster support 47KHz remote signal protocol,

while the IR sensor supports 36KHz - 56KHz (NEC,



Install remote control

batteries

Caution

 Risk of explosion! Keep batteries away from heat,



 Risk of decreased battery life! Never mix different

brands or types of batteries.

 Risk of product damage! When the remote control is

not used for long periods, remove the batteries.

AAA

1Open the battery compartment.

2Insert two AAA batteries with correct



3Close the battery compartment.

Connect the IR blaster and IR

sensor extender cables

Tip

 If you cannot use the remote control of your device,

follow the steps in this section to connect the sensor

extender cables .

Connect the infrared blaster or sensor extender

cables if necessary.

1Plug the IR blaster extender cable into

the IR OUT blaster extender jack of the

transmitter.

2Extend and stick the IR blaster extender

cable onto the front panel of the HD

device.

3After the IR blaster extender cable is

connected to the transmitter, you can

control your HD device with the remote

control. Make sure that the remote control

points to the receiver.

4If the distance between the receiver and

receiver has obstruction (e.g. the receiver



the IR sensor extender cable into the IR

IN jack of the receiver.

UYYAAWOA'0KPFF 

Inhaltsverzeichnis

Sprachen:

Andere Philips Adapter Handbücher

Philips

Philips SWA2089NB Bedienungsanleitung

Philips

Philips SWA2038 Bedienungsanleitung

Philips

Philips IMAGEO 69136/55/PH Bedienungsanleitung

Philips

Philips SDJ6028 Bedienungsanleitung

Philips

Philips SBCCU220/00 Bedienungsanleitung

Philips

Philips WUB1110 Bedienungsanleitung

Philips

Philips SJM2300/10 Bedienungsanleitung

Philips

Philips SWA4551W Bedienungsanleitung

Philips

Philips US2-P72069 Bedienungsanleitung

Philips

Philips CCU7740N/00 Bedienungsanleitung

Philips

Philips SWV3459W Bedienungsanleitung

Philips

Philips Streamium Sl300i Bedienungsanleitung

Philips

Philips PowerLife 3LR12PBXC Bedienungsanleitung

Philips

Philips SWA4552W Bedienungsanleitung

Philips

Philips AEA2000 Bedienungsanleitung

Philips

Philips SWA3032W Bedienungsanleitung

Philips

Philips CPWUA054/00 Bedienungsanleitung

Philips

Philips SYK5600/05 Bedienungsanleitung

Philips

Philips CCU7740N/00 Bedienungsanleitung

Philips

Philips SW2552W Bedienungsanleitung

Philips

Philips SWV3459W Bedienungsanleitung

Philips

Philips SWA4553W Bedienungsanleitung

Philips

Philips SWV3460S/10 Bedienungsanleitung

Philips

Philips VOIP0801B Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung

Koolatron

Koolatron AC16 Bedienungsanleitung