Philips TDA6107JF Bedienungsanleitung

DATA SHEET

Product speciﬁcation 2002 Oct 18

INTEGRATED CIRCUITS

TDA6107JF

Triple video output amplifier

2002 Oct 18 2

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

FEATURES

•Typical bandwidth of 5.5 MHz for an output signal of

60 V (p-p)

•High slew rate of 900 V/µs

•No external components required

•Very simple application

•Single supply voltage of 200 V

•Internal reference voltage of 2.5 V

•Fixed gain of 50

•Black-Current Stabilization (BCS) circuit with voltage

window from 1.8 to 6 V and current window from

−100 µA to 10 mA

•Thermal protection

•Internal protection against positive flashover discharges

appearing on the CRT.

GENERAL DESCRIPTION

The TDA6107JF includes three video output amplifiers

andisintendedtodrivethethreecathodesofacolourCRT

directly. The device is contained in a plastic DIL-bent-SIL

9-pin medium power (DBS9MPF) package, and uses

high-voltage DMOS technology.

To obtain maximum performance, the amplifier should be

used with black-current control.

ORDERING INFORMATION

TYPE

NUMBER PACKAGE

NAME DESCRIPTION VERSION

TDA6107JF DBS9MPF plastic DIL-bent-SIL medium power package with ﬁn; 9 leads SOT111-1

2002 Oct 18 3

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

BLOCK DIAGRAM

handbook, full pagewidth

MBL525

TDA6107JF

VDD

1, 2, 3

9, 8, 7 Voc(3),

Voc(2),

Voc(1)

5Io(m)

MIRROR 5

DIFFERENTIAL

STAGE

VIP

REFERENCE

CURRENT

SOURCE

Vi(1),

Vi(2),

Vi(3) Ra

3×

CASCODE 1

CASCODE 2

MIRROR 2

1×

MIRROR 4

MIRROR 3

MIRROR 1

THERMAL

PROTECTION

CIRCUIT

1×

Fig.1 Block diagram (one amplifier shown).

PINNING

SYMBOL PIN DESCRIPTION

Vi(1) 1 inverting input 1

Vi(2) 2 inverting input 2

Vi(3) 3 inverting input 3

GND 4 ground (ﬁn)

Iom 5 black-current measurement output

VDD 6 supply voltage

Voc(3) 7 cathode output 3

Voc(2) 8 cathode output 2

Voc(1) 9 cathode output 1

handbook, halfpage

Vi(1)

Vi(2)

Vi(3)

GND

Iom

VDD

Voc(3)

Voc(2)

Voc(1)

TDA6107JF

MBL524

Fig.2 Pin configuration.

2002 Oct 18 4

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134); voltages measured with respect to pin 4

(ground); currents as speciﬁed in Fig.1; unless otherwise speciﬁed.

HANDLING

Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is

desirable to take normal precautions appropriate to handling MOS devices (see

“Handling MOS Devices”

QUALITY SPECIFICATION

Quality specification

“SNW-FQ-611 part D”

is applicable and can be found in the

“Quality reference Handbook”

The handbook can be ordered using the code 9397 750 00192.

SYMBOL PARAMETER MIN. MAX. UNIT

VDD supply voltage 0 250 V

Viinput voltage at pins 1 to 3 0 12 V

Vo(m) measurement output voltage 0 6 V

Voc cathode output voltage 0 VDD V

Iocsm(L) LOW non-repetitive peak cathode output current at a ﬂashover

discharge of 100 µC03A

ocsm(H) HIGH non-repetitive peak cathode output current at a ﬂashover

discharge of 100 nC 06A

stg storage temperature −55 +150 °C

Tjjunction temperature −20 +150 °C

Ves electrostatic handling voltage

Human Body Model (HBM) −3000 V

Machine Model (MM) −300 V

2002 Oct 18 5

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

THERMAL CHARACTERISTICS

Note

1. An external heatsink is necessary.

SYMBOL PARAMETER CONDITIONS VALUE UNIT

Rth(j-a) thermal resistance from junction to ambient 56 K/W

Rth(j-ﬁn) thermal resistance from junction to ﬁn note 1 11 K/W

Rth(h-a) thermal resistance from heatsink to ambient 18 K/W

Thermal protection

The internal thermal protection circuit gives a decrease of

the slew rate at high temperatures: 10% decrease at

130 °C and 30% decrease at 145 °C (typical values on the

spot of the thermal protection circuit).

handbook, halfpage

−40

Ptot

(W)

40 80 160120

Tamb (°C)

MBH989

(1)

(2)

Fig.3 Power derating curves.

(1) Infinite heatsink.

(2) No heatsink.

handbook, halfpage

MGK279

5 K/W

outputs

fin

thermal protection circuit

6 K/W

Fig.4 Equivalent thermal resistance network.

2002 Oct 18 6

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

CHARACTERISTICS

Operating range: Tj=−20 to +150 °C; VDD = 180 to 210 V. Test conditions: Tamb =25°C; VDD = 200 V;

Vo(c1) =V

o(c2) =V

o(c3) =1⁄2VDD; CL= 10 pF (CLconsists of parasitic and cathode capacitance); Rth(h-a) = 18 K/W

(measured in test circuit of Fig.8); unless otherwise speciﬁed.

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Iqquiescent supply current 5.6 6.6 7.6 mA

Vref(int) internal reference voltage

(input stage) −2.5 −V

Riinput resistance −3.6 −kΩ

G gain of ampliﬁer 47.5 51.0 55.0

∆G gain difference −2.5 0 +2.5

VO(oc) nominal output voltage at

pins 7, 8 and 9 (DC value) Ii=0µA 116 129 142 V

∆VO(oc)(offset) differential nominal output

offset voltage between

pins 7 and 8, 8 and 9 and

9 and 7 (DC value)

Ii=0µA−05V

∆V

o(c)(T) output voltage temperature

drift at pins 7, 8 and 9 −10 −mV/K

∆Vo(c)(T)(offset) differential output offset

voltage temperature drift

between pins 7 and 8,

8 and 9 and 7 and 9

−0−mV/K

Io(m)(offset) offsetcurrentofmeasurement

output (for three channels) Io(c) =0µA;

1.5 V < Vi< 5.5 V;

1.8 V < Vo(m) <6V

−50 −+50 µA

∆Io(m)/∆Io(c) linearity of current transfer

(for three channels) −100 µA<I

o(c) < 100 µA;

1.5 V < Vi< 5.5 V;

1.8 V < Vo(m) <6V

−0.9 −1.0 −1.1

−100 µA≤Io(c) <10mA;

1.5 V < Vi< 5.5 V;

1.8 V < Vo(m) <4V

−0.9 −1.0 −1.1

Io(c)(max) maximum peak output current

(pins 7, 8 and 9) 50V<V

o(c) <V

DD −50 V −20 −mA

Vo(c)(min) minimum output voltage

(pins 7, 8 and 9) Vi= 7.0 V; at Io(c) = 0 mA;

note 1 −−10 V

Vo(c)(max) maximum output voltage

(pins 7, 8 and 9) Vi= 1.0 V; at Io(c) = 0 mA;

note 1 VDD −15 −−V

Ssmall signal bandwidth

(pins 7, 8 and 9) Vo(c) = 60 V (p-p) −5.5 −MHz

BLlarge signal bandwidth

(pins 7, 8 and 9) Vo(c) = 100 V (p-p) −4.5 −MHz

tPco cathode output propagation

time 50% input to 50% output

(pins 7, 8 and 9)

Vo(c) = 100 V (p-p) square

wave; f <1 MHz;

tr=t

f=40ns

(pins 1, 2 and 3);

see Figs 6 and 7

−60 −ns

2002 Oct 18 7

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

Notes

1. See also Fig.5 for the typical DC-to-DC transfer of VIto VO(oc).

2. The ratio of the change in supply voltage to the change in input voltage when there is no change in output voltage.

∆tPco difference in cathode output

propagationtime 50% input to

50% output (pins 7 and 8,

7 and 9 and 8 and 9)

Vo(c) = 100 V (p-p) square

wave; f < 1 MHz;

tr=t

f=40ns

(pins 1, 2 and 3)

−10 0 +10 ns

to(r) cathode output rise time

10% output to 90% output

(pins 7, 8 and 9)

Vo(c) = 50 to 150 V square

wave; f < 1 MHz; tf=40ns

(pins 1, 2 and 3); see Fig.6

67 91 113 ns

to(f) cathode output fall time

90% output to 10% output

(pins 7, 8 and 9)

Vo(c) = 150 to 50 V square

wave; f < 1 MHz; tr=40ns

(pins 1, 2 and 3); see Fig.7

67 91 113 ns

tst settling time 50% input to

99% < output < 101%

(pins 7, 8 and 9)

Vo(c) = 100 V (p-p) square

wave; f < 1 MHz;

tr=t

f=40ns

(pins 1, 2 and 3);

see Figs 6 and 7

−−350 ns

SR slew rate between

50Vto(V

DD −50 V)

(pins 7, 8 and 9)

Vi= 4 V (p-p) square wave;

f < 1 MHz; tr=t

f=40ns

(pins 1, 2 and 3)

−900 −V/µs

Ovcathode output voltage

overshoot (pins 7, 8 and 9) Vo(c) = 100 V (p-p) square

wave; f < 1 MHz;

tr=t

f=40ns

(pins 1, 2 and 3);

see Figs 6 and 7

−2−%

PSRR power supply rejection ratio f < 50 kHz; note 2 −55 −dB

αct(DC) DC crosstalk between

channels −−50 −dB

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

2002 Oct 18 8

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

handbook, halfpage

Vo(c)

(V)

22.5 46

(V)

200

160

120

129

MBH988

Fig.5 Typical DC-to-DC transfer of VIto VOC.

2002 Oct 18 9

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

150

140

100

151

149

tst

Ov(in %)

3.08

4.04

2.12

to(r)

tPco

Vo(c)

(V)

MGK280

Fig.6 Output voltage (pins 7, 8 and 9) rising edge as a function of the AC input signal.

2002 Oct 18 10

Philips Semiconductors Product speciﬁcation

Triple video output ampliﬁer TDA6107JF

Ov(in %)

MGK281

150

140

100

3.08

4.04

2.12

Vo(c)

(V)

tst

to(f)

tPco

Fig.7 Output voltage (pins 7, 8 and 9) falling edge as a function of the AC input signal.

Inhaltsverzeichnis

Andere Philips Verstärker Handbücher

Philips

Philips PM 3344 Bedienungsanleitung

Philips

Philips TDA1517 Bedienungsanleitung

Philips

Philips SWV2116 Bedienungsanleitung

Philips

Philips BGY580 Bedienungsanleitung

Philips

Philips FA 911 Bedienungsanleitung

Philips

Philips SA5205A Bedienungsanleitung

Philips

Philips SBA3005/37 Bedienungsanleitung

Philips

Philips BGA6589 Bedienungsanleitung

Philips

Philips TDA8591J Bedienungsanleitung

Philips

Philips 5534A Bedienungsanleitung

Philips

Philips CMP400 Bedienungsanleitung

Philips

Philips DFA 888 Bedienungsanleitung

Philips

Philips TDA8566TH Bedienungsanleitung

Philips

Philips FA761/00 Bedienungsanleitung

Philips

Philips 22AH572-44 Bedienungsanleitung

Philips

Philips 32PW9556-05R Bedienungsanleitung

Philips

Philips Diamond Line 2 Bedienungsanleitung

Philips

Philips TDA8561Q Bedienungsanleitung

Philips

Philips SWV2064W Bedienungsanleitung

Philips

Philips Amplifier Bedienungsanleitung

Philips

Philips BGY88 Bedienungsanleitung

Philips

Philips PM 3342 Bedienungsanleitung

Philips

Philips Plena Leitfaden

Philips

Philips 22RH520 00 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung