Philips 3000 series Bedienungsanleitung

www.philips.com/support

User manual

Clock Radio

3000 Series

R3505

Contents

1 Important 2

Safety 2

Your clock radio 3

Introduction 3

What's in the box 3

Overview of the clock radio 3

3 Get started 4

Install batteries 4

Connect power 4

Set time 4

Turn on 4

Listen to DAB+ radio 5

Tune to DAB+ radio stations 5

Store DAB+ radio stations automatically 5

Store DAB+ radio stations manually 5

Select a preset DAB+ radio station 5

Show DAB+ information 5

Use DAB+ menu 6

Listen to FM radio 6

Tune to FM radio stations 6

Store FM radio stations automatically 6

Store FM radio stations manually 6

Select a preset radio station 7

Show RDS information 7

Use FM menu 7

6 Other features 8

Set alarm time 8

Set sleep timer 8

Adjust volume 8

Adjust display brightness 8

7 Product information 9

8 T

roubleshooting 9

9 Notice 10

Contents

2EN

1 Important

Safety

Warning

• Never remove the casing of this clock radio.

• Never lubricate any part of this clock radio.

• Never place this clock radio on other

electrical equipment.

• Keep this clock radio away from direct

sunlight, naked ames or heat.

• Make sure that you always have easy access

to the power cord, plug or adaptor to

disconnect the clock radio from the power.

• Read these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

• Protect the power cord from being walked on

or pinched, particularly at plugs, convenience

receptacles, and the point where they exit

from the clock radio.

• Only use attachments/accessories specied by

the manufacturer.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

• Battery usage CAUTION -To prevent battery

leakage which may result in bodily injury,

property damage, or damage to the clock radio:

• Install all batteries correctly, + and - as

marked on the unit.

• Remove batteries when the unit is not

used for a long time.

• The battery shall not be exposed to

excessive heat such as sunshine, re or

the like.

• This clock radio shall not be exposed to

dripping or splashing.

• Do not place any sources of danger on the

clock radio (e.g. liquid lled objects, lighted

candles).

• Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

Your clock radio

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/support.

Introduction

With this clock radio, you can

• listen to both FM and Digital Audio

Broadcasting (DAB+) radio;

• set two alarms to ring at different times.

What's in the box

Check and identify the contents of your package:

• Main unit

• AC power adaptor

• Quick start guide

• Safety and Warranty leaet

Quick start guide

TAPR802

Overview of the clock radio

• Turn on or switch to standby.

b.PRESET / SET TIME

• Store radio stations in memory.

• Select a preset FM station or DAB station.

• Set time.

c.HR / MIN / TUN

• Tune to radio stations.

• Set hour and minute.

d.SNOOZE / BRIGHTNESS

• Snooze alarm.

• Adjust display brightness.

e.Display panel

• Display current status.

f.AL1 / AL2 / VOL

• Set alarm.

• Adjust volume.

g.MENU / INFO

• Enter the DAB+ menu.

• Display DAB/RDS station information.

h.SCAN / SELECT

• Scan/store radio stations automatcially.

• Conrm a selection.

i.SLEEP

• Set the sleep timer.

j.FM / DAB

• Select FM or DAB+ mode.

4EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Install batteries

The batteries can only back up clock and alarm

settings.

Caution

• Risk of explosion! Keep the batteries away from heat,

sunshine or re. Never discard batteries in re.

• Batteries contain chemical substances, so they should

be disposed of properly.

Insert 2 AAA batteries (not provided) with

correct polarity (+/-) as illustrated.

Connect power

Caution

• Risk of product damage! Make sure that the power

voltage corresponds to the voltage printed on the back

or underside of the clock radio..

• Risk of electrical shock! When you unplug the power

adapter, always pull the plug from the socket. Never

pull the cord.

• Use only the AC power adapter specied in the

manufacturer or sold with this unit.

Note

• The type plate is located at the bottom of the clock radio.

Set time

Note

• You can only set time in standby mode.

1 In standby mode, press and hold SET TIME

for more than 2 seconds.

2 Press TUN to select <24 HR> or

<12 HR> hour format, then press SET TIME

to conrm.

3 Press HR to set hour and MIN to set minute,

then press SET TIME to conrm.

4 Press TUN to set date, month and

year [DD-MM-YY], then press SET TIME to

conrm.

5 Press TUN to select <UPDATE FROM

RADIO> or <NO UPDATE>, then press

SET TIME to conrm.

» [SAVED] is displayed and the time is set.

Turn on

Press to turn on the clock radio.

» The unit switches to the last selected

source.

To switch to standby mode, press again.

» The real-time clock is displayed.

Listen to DAB+

radio

Tune to DAB+ radio stations

1 Press to turn on the clock radio.

2 Press DAB / FM repeatedly to select DAB

mode.

» [DAB] will be displayed for more than 2

seconds and a DAB icon will be turned on.

» The unit will tune to the last tuned station

and display the station name.

» For the rst-time use, [PRESS SELECT TO

SCAN] will be displayed.

3 Press SCAN / SELECT.

» The unit stores all DAB+ radio stations

automatically and broadcasts the rst

available station.

» If no DAB+ station is found, [NO SIG] (no

DAB+ signal) is displayed.

To tune to a station from the available station list:

» In DAB mode, press TUN repeatedly

to navigate through the available DAB+

stations.

Store DAB+ radio stations

automatically

In DAB mode, press and hold SCAN / SELECT

for more than 2 seconds.

» The unit scans all the available DAB+ radio

stations and broadcasts the rst available

station.

Tip

• No DAB+ radio station is stored to presets during this

process.

• New stations and services will be added in the DAB+

broadcast.To make new DAB+ stations and services

available, perform a full scan regularly.

Store DAB+ radio stations

manually

Note

• You can store a maximum of 20 preset DAB+ radio

stations.

1 Tune to a DAB+ radio station.

2 Press and hold PRESET for more than 2

seconds to acitvate programming mode.

3 Press TUN repeatedly to select a number.

4 Press PRESET again to conrm.

5 Repeat steps 1 to 4 to store more DAB+

radio stations.

Note

• To remove a preset DAB+ radio station, store another

station in its place.

Select a preset DAB+ radio

station

1 In DAB mode, press PRESET.

2 Press TUN repeatedly to select a preset

radio station, then press SELECT to conrm.

Show DAB+ information

While listening to DAB+ radio, press MENU / INFO

repeatedly to scroll through the following

information (if available):

• Station name

6EN

• Dynamic Label Segment (DLS)

• Signal strength

• Program type (PTY)

• Ensemble Name

• Channel and frequency

• Signal error rate

• Bit rate and audio status

• Time

• Date

Use DAB+ menu

1 In DAB mode, press and hold MENU / INFO for

more than 2 seconds to access the DAB+ menu.

2 Press TUN to scroll through the menu

options:

• [Scan]: scan all the available DAB+ radio

stations.

• [Manual]: tune to a specic channel/

frequency manually and add it to the

station list.

• [DRC]: add or remove a degree of

compensation for the differences in the

dynamic range between radio stations.

• [Prune]: remove all the invalid stations

from the station list.

• [System]: adjust system settings.

3 To select an option, press SELECT.

4 Repeat steps 2-3 if any sub-option is available

under an option.

[System]

• [Reset]: reset all the settings to factory default.

• [SW VER] (software version): know the

software version of the unit.

• [Language]: set system language (English

/ Deutsch / Itliano / Français / Norsk /

Nederlands).

Note

• If no button is pressed within 15 seconds, the menu

will exit.

Listen to FM radio

Note

• Keep the clock radio away from other electronic devices

to avoid radio interference.

• For better reception, fully extend and adjust the position

of the FM antenna.

Tune to FM radio stations

1 Press to turn on the clock radio.

2 Press FM / DAB repeatedly to select FM

radio.

3 Press and hold TUN for more than 2

seconds.

» The clock radio tunes to a station with

strong reception automatically.

4 Repeat Step 3 to tune to more radio stations.

To tune to a station manually:

In FM tuner mode, press TUN repeatedly

to select a frequency.

Store FM radio stations

automatically

In FM tuner mode, press and hold SCAN for

more than 2 seconds.

» The unit stores all the available FM radio

stations automatically and broadcasts the

rst station.

Store FM radio stations manually

Note

• You can store a maximum of 20 FM radio stations.

1 Tune to an FM radio station.

2 Press and hold PRESET for more than 2

seconds to activate programming mode.

3 Press TUN repeatedly to select a number.

4 Press PRESET again to conrm.

5 Repeat steps 1 to 4 to store more FM radio

stations.

Tip

• To remove a pre-stored station, store another station

in its place.

Select a preset radio station

1 In FM tuner mode, press PRESET.

2 Press TUN repeatedly to select a preset

radio station, then press SELECT to conrm.

Show RDS information

RDS (Radio Data System) is a service that

allows FM radio stations to show additional

information.

While listening, press MENU / INFO repeatedly

to scroll through the following information (if

available):

• Station frequency

• Station name

• Program name

Use FM menu

1 In FM tuner mode, press and hold MENU /

INFO for more than 2 seconds to access the

FM menu.

2 Press TUN to scroll through the menu

options:

• [Scan]: scan settings.

• [System]: adjust system settings.

3 To select an option, press SELECT.

4 Repeat steps 2-3 if any sub-option is available

under an option.

[Scan] (scan setting)

• [All] (all stations): scan all the available FM

radio stations.

• [Strong] (strong stations only): scan FM radio

stations with strong signals only.

[System]

• [Reset]: reset all the settings to factory default.

• [SW Version]: know the software version of

the unit.

• [Language]: set system language (English

/ Deutsch / Itliano / Français / Norsk /

Nederlands).

8EN

6 Other features

Set alarm time

Set alarm

Note

• You can only set the alarm in standby mode.

• Make sure that you have set the clock correctly.

1 In standby mode, press and hold AL1 or AL2

for more than 2 seconds to set alarm time.

2 Press HR to set hour and MIN to set minute,

then press AL1 or AL2 to conrm.

3 Press TUN to set alarm type (daily, once,

weekdays, or weekends), then press AL1 or

AL2 to conrm.

4 Press TUN to set an alarm source (FM,

DAB, or buzzer), then press AL1 or AL2 to

conrm.

5 Press TUN to set the volume level, then

press AL1 or AL2 to conrm.

Tip

• The unit exits alarm setting mode when being idle for 15

seconds.

Activate/deactivate alarm timer

Press AL1 or AL2 repeatedly to activate or

deactivate the alarm timer.

» If the alarm timer is activated, the alarm

indicator turns on.

» If the alarm timer is deactivated, the alarm

indicator turns off.

» The alarm repeats ringing for the next day.

» To stop the alarm, press the coresponding

AL1 or AL2.

Snooze the alarm

When the alarm sounds, press SNOOZE.

» The alarm snoozes and repeats ringing 9

minutes later.

Set sleep timer

This clock radio can switch to standby mode

automatically after a preset period.

• Press SLEEP repeatedly to select a period

(in minutes).

» The clock radio switches to standby mode

automatically after the preset period.

To deactivate the sleep timer:

• Press SLEEP repeatedly until [OFF] (off)

appears.

Adjust volume

While listening, press VOL to adjust volume.

Adjust display brightness

Press BRIGHTNESS repeatedly to adjust the

display brightness.

• HIGH (High)

• MED (Medium)

• LOW (Low)

8 T

roubleshooting

Warning

• Never remove the casing of the product

To keep the warranty valid, never try to repair

the device yourself.

If you encounter problems when using this

device, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips webpage (ww.philips.

com/support). When you contact Philips, make

sure that the device is nearby and the model

number and serial number are available.

No power

• Make sure that the AC power plug of the

unit is connected properly.

• Make sure that there is power at the AC outlet.

No sound

• Adjust the volume.

No response from the unit

• Disconnect and reconnect the AC power

plug, then turn on the unit again.

Poor radio reception

• Keep the clock radio away from other

electronic devices to avoid radio

interference.

• Fully extend and adjust the position of the

antenna.

Alarm does not work

• Set the clock/alarm correctly.

Clock/alarm setting erased

• Power has been interrupted or the power

plug has been disconnected.

• Reset the clock/alarm.

7 Product

information

Note

• Product information is subject to change without prior notice.

Amplier

Rated Output Power 1W RMS

Tuner

Tuning Range FM: 87.5-108 MHz

DAB: 174.92-

239.20MHz

Tuning Grid 50 KHz

Sensitivity

- Mono, 26 dB S/N

Ratio

<22 dBf

Total Harmonic

Distortion

<3%

Signal to Noise Ratio >50 dBA

General information

AC Power (power

adaptor)

Brand: Philips;

Model:AS030-050-EE060

Input: 100-240V~

50/60 Hz; 0.15A

Output: 5V 0.6A

Operation Power

Consumption <3W

Standby Power

Consumption <1W

Dimensions

(W x H x D) 131 x 54 x 131 mm

Weight

(Main unit) 267.3g

Andere Handbücher für 3000 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Radiowecker Handbücher

Philips

Philips AJ7260D Bedienungsanleitung

Philips

Philips AJ-3551 Bedienungsanleitung

Philips

Philips AJ4000B Bedienungsanleitung

Philips

Philips AJ3600/05 Bedienungsanleitung

Philips

Philips GENTLE WAKE AJ 3130 Bedienungsanleitung

Philips

Philips AJ3500/77 Bedienungsanleitung

Philips

Philips AJ3600/79 Bedienungsanleitung

Philips

Philips AJ 3920 Bedienungsanleitung

Philips

Philips AJ3017/05 Bedienungsanleitung

Philips

Philips AJ3925 - Cd Clock Radio Bedienungsanleitung

Philips

Philips AJ3230 Bedienungsanleitung

Philips

Philips AJ3740/00S Bedienungsanleitung

Philips

Philips AJ130/12 Bedienungsanleitung

Philips

Philips MG-C100/17 Bedienungsanleitung

Philips

Philips AJ5000 Bedienungsanleitung

Philips

Philips AJ100/05 Bedienungsanleitung

Philips

Philips AE2330 Bedienungsanleitung

Philips

Philips AJ3250S Bedienungsanleitung

Philips

Philips AJ3940 - annexe 2 Systemhandbuch

Philips

Philips AJ260/79 Bedienungsanleitung

Philips

Philips AJ3910 Bedienungsanleitung

Philips

Philips AJ 3010 Bedienungsanleitung

Philips

Philips AJ3840 Bedienungsanleitung

Philips

Philips AJ3230 Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

RCA

RCA RPC100 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung